Content |
The bi-amplified Genelec 4040A is a powerful but compact two way active loudspeaker designed for fixed installations.
As an active loudspeaker, it contains drivers, power amplifiers, active crossover filters and protection circuitry. This integrated design makes installations easier and more efficient as separate power amplifiers are not needed.
The MDETM (Minimum Diffraction EnclosureTM) loudspeaker enclosure is made of die-cast aluminium and shaped to reduce edge diffraction.
Combined with the advanced Directivity Control WaveguideTM (DCWTM), this design provides excellent frequency balance in difficult acoustic environments.
The 4040A is equipped with practical tone controls for calibrating the loudspeakers according to their environment.
Automatic protection circuits for amplifiers and loudspeaker drivers combined with the rugged metal enclosure ensure reliability for years to come.
The versatile mounting features include integrated rear support points for wall and floor stands plus a further M10 thread for mounting on the enclosure base.
| 109 dB | | 55 Hz - 20 kHz (± 3 dB)
55 Hz - 20 kHz (-3 dB) | | 2.5 kHz | | Bass 6.5" + Treble ¾“
metal dome + DCWTM | | Bass 120 W + Treble 120 W | | H x W x D 350 x 237 x 223 mm | | 9.9 Kg (22 lb) | | 1 x balanced Phoenix connector |
|
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Code: |
37687 / 37905 White |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
80/40 W RMS |
Built-in amplifier peak LF/HF: |
160/80 W |
Frequency response: |
80Hz - 20KHz -6dB |
Low Frequency woofer: |
5 - 1 coil inch |
High Frequency driver: |
1 dome - 0.75 coil inch |
Maximum SPL cont/peak: |
113 / 117 dB |
Dispersion: |
90° x 90° HxV |
Input impedance: |
22 Kohm |
Crossover Frequency: |
3.5 KHz |
AC Power requirements: |
75 VA |
Input connector: |
XLR combo with loop |
Power cord: |
5 / 16.4 m/ft |
Net Dimension (WxHxD): |
170x275x180 - 6.69x10.82x7.08 mm/inch |
Net Weight: |
3.4 / 7.49 Kg/lb |
Transport Dimension (WxHxD): |
240x345x235 - 9.44x13.58x9.25 mm/inch |
Transport Weight: |
4.2 / 9.25 Kg/lb |
| | SDQ5PIR is a stereo loudspeaker set with 1 active and 1 passive loudspeaker that stands for reliability, affordability, dynamic music and detailed voice reproduction! The active stereo amplifier loudspeaker has a low distortion high efficiency 5.25” woofer and one output is fed to the second linkable passive loudspeaker.
The SDQ5PIR set can be controlled from the included infrared remote control, via serial commands or via the Apart wall control panels (ACP, ACPL or ACPR) which allow control of power and volume. ACPL and ACPR also allow the addition of external audio inputs. Teachers, lecturers or anyone who is giving a presentation can stop worrying about audio system problems and stay focused on their presentation.
All inputs can be gain adjusted, used individually or mixed together. The balanced input allows long signal line without |
The very compact 4030B is a powerful bi-amplified speaker system ideal for small to mid-sized commercial installations such as clubs, bars, board rooms, museums, theaters, etc.
Our Intelligent Signal Sensing (ISS) feature, reduces power consumption to less than 0.5 watts by automatically switching the active monitor to standby, when no audio signal has been detected for some time. When it receives an audio signal again, the loudspeaker turns back on.
ISS is fully compliant with the latest EU requirements and the ErP 2013 Directive for electronic devices.
The MDETM (Minimum Diffraction EnclosureTM) enclosure has rounded edges and a gently curved front and sides to achieve a very smooth frequency response and superb imaging qualities with minimized cabinet edge diffraction.
The 4030B also features the advanced Genelec Directivity Control WaveguideTM (DCWTM), a revolutionary flow-optimized reflex port design, optimized die-cast aluminium structure with extremely durable semi-matt finish and acoustically optimized metal grilles.
| 100 dB | | 58 Hz - 20 kHz (± 2.5 dB)
55 Hz - 20 kHz (-3 dB) | | 3.0 kHz | | Bass 5" + Treble 3/4“
metal dome + DCWTM | | Bass 40 W + Treble 40 W | | H x W x D 285 x 189 x 178 mm | | 5.5 Kg (12.1 lb) | | 1 x balanced Phoenix connector |
| Case Material 9-ply, 15mm Plywood, Internally Braced, with Texured Paint
Frequency Response (-3 dB) 56 Hz - 18 k Hz
Frequency Response (-10 dB) 44 Hz - 20 k Hz
Max. SPL/1m (calc) 134 dB
Coverage
(Nominal -6 dB) H° 90 °
Coverage
(Nominal -6 dB) V° 50 °
LF Transducer (1) EVS-15K, 381mm (15”) Woofer
HF Transducer DH-1K, 39mm (1.5”) Titanium Diaphragm Compression Driver
Crossover Frequency 1.7 k Hz
Connector Type (2) XLR/TRS Combo Jacks, (1) Stereo RCA, (1) XLR Link Output
Grill 18GA Steel with Black Powdercoat
Height 708 mm (27.87“)
Width 432 mm (17.01“)
Depth 382 mm (15.04“)
Weight Net 24.3 kg (53.57 lbs)
Shipping Weight 29.5 kg (65.04 lbs) |
Reviews
There are no reviews yet.