| Content |
Info
The Genelec 5040B is an extremely compact active subwoofer designed to complement up to five 6010Aʼs with accurate and dynamic bass response reaching down to 35 Hz. Matched perfectly with the 6010Aʼs, the 5040B conveniently features a remote volume control allowing adjustment of the entire sound system as well as versatile acoustic controls for perfect room integration. Designed by Genelecʼs R&D team in co-operation with internationally acclaimed Finnish designer Harri Koskinen, the 5040A subwoofer features an unobtrusive, modern appearance. The 5040B features a magnetically shielded downward firing 6 1/2? bass driver attached to a die-cast aluminium base plate.
|
Genelec 7260A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to an entirely new level. This powerful and precise low frequency monitoring solution is designed for modern 6.1 or 5.1 multi-channel systems as well as traditional stereo applications.
With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile digital bass management system, the 7260A adapts to all low frequency monitoring situations. The amplifier unit is integrated into the enclosure containing active DSP crossover filters, driver overload protection circuits and power amplifiers.
The built-in bass management system supports eight input and output channels (four XLR connectors) for AES/EBU formatted digital audio. The main channels crossover frequency can be adjusted between 50-100 Hz.The LFE channel input (input 4) features an adjustable 50 - 120 Hz low-pass filter and a 0/+10 dB sensitivity switch.
The Genelec Loudspeaker Manager (GLMTM) control network and software enhances further the performance of the 7260A: it features adjustment of levels, distance delays, phase and flexible room response improvement equalization with the reliable and robust AutoCalTM automated calibration system via the GLMTM control network.
The Genelec Laminar Spiral EnclosureTM (LSETM) bass reflex enclosure is made of sheet metal rolled into a spiral shape and clamped between sturdy MDF side panels.
This novel construction technique allows for a long reflex tube to be mounted into a small cabinet, which provides as a result excellent laminar flow characteristics with minimal turbulence noise.
| 108 dB | | Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 10“ | | 120 W | | H x W x D 527 x 462 x 363 mm | | 27 Kg (59 lb) | | 4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU) |
|
Genelec 7270A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to an entirely new level. This powerful and precise low frequency monitoring solution is designed for modern 6.1 or 5.1 multi-channel systems as well as traditional stereo applications.
With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile digital bass management system, the 7270A adapts to all low frequency monitoring situations.The amplifier unit is integrated into the enclosure containing active DSP crossover filters, driver overload protection circuits and power amplifiers.
The built-in bass management system supports eight input and output channels (four XLR connectors) for AES/EBU formatted digital audio.
The main channels crossover frequency can be adjusted between 50-100 Hz. The LFE channel input (input 4) features an adjustable 50 - 120 Hz low-pass filter and a 0/+10 dB sensitivity switch.
The Genelec Loudspeaker Manager (GLMTM) control network and software enhances further the performance of the 7270A: it features adjustment of levels, distance delays, phase and flexible room response improvement equalization with the reliable and robust AutoCalTM automated calibration system via the GLMTM control network.
The Genelec Laminar Spiral EnclosureTM (LSETM) bass reflex enclosure is made of sheet metal rolled into a spiral shape and clamped between sturdy MDF side panels.
This novel construction technique allows for a long reflex tube to be mounted into a small cabinet, which provides as a result excellent laminar flow characteristics with minimal turbulence noise.
| 112 dB | | Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 12“ | | 250 W | | H x W x D 625 x 555 x 490 mm | | 51 Kg (112 lb) | | 4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU) |
|
The Sub6 is a large volume cabinet design, equipped with an 11" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL. The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE. The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.
Specifications | Frequency response : | 30Hz - 250Hz | | Maximum SPL : | 116dB SPL (peak @ 1m) | |
Input :
|
Right, left, LFE
Electronically balanced, 10 kOhms
XLR 3 points socket
Adjustable
| | Outputs (towards speakers) : | Type/Impedance: Electronically balanced / 50 Ohms - Connector: XLR 3 points plug | |
Amplification :
|
350W rms, BASH® technology
| |
Signal internal treatment :
|
Subwoofer section: Mono right/left summation
LFE + mono low-pass
24dB/octave
Phase adjustment
Polarity selection switch
Switch high-pass filter, cut-off frequency selection
Speaker section : 24 dB / octave
| |
Electric supply :
|
Local supply wire: 230V (1.6A fuse)
or 115V (3.5A fuse)
Connection: removable IEC supply wire
| |
Visualization and control :
|
Adjustable subwoofer level
Low-pass cut-off frequency setting
Phase adjustment
Polarity adjustment
Subwoofer switch (mute)
2.1 "Bypass" (external remote contol)
High-pass frequency selection
Releasable high-pass
| | warning light : | Power on LED, Subwoofer switch (mute), Released high-pass | |
Electric supply :
|
Local supply wire: 230V (1.6A fuse)
or 115V (3.5A fuse)
Connection: removable IEC supply wire
| | Subwoofer : | 11W7670, 10-5/8" (27cm) Focal "W" composite sandwich cone driver | | Box : | 7-1/2" (19mm) MDF panels | |
Finish :
|
Dark red natural veneering side panels, black body.
| | Dimensions (HxWxD) : | 14-15/16 x 13-9/16 x 17-5/16 " (380 x 344 x 440mm) | | Weight : | 50.7lb (23kg) |
|
Product details
| Woofer: | 10-inch black Glass-Composite Cone | | Frequency response: | 20Hz - 200Hz | | Crossover frequency: | 50Hz - 130Hz adjustable | | Amplifier Power: | 300W | | S/N Ratio (A weighted): | >95dB | | THD + N @ Rated Power: | 0.08% | | Inputs: | 2x XLR, 2x TRS, 2x RCA Connectors | | Outputs: | 2x XLR, 2x TRS, 1x XLR balanced (Sub out) Connectors | | Input Impedance: | 20 kOhm balanced, 10 kOhm unbalanced | | Phase reverse: | 0 / 180° switch | | Ground Lift switch: | On / Off | | Bypass Footswitch: | On / Off | | Available colors: | Red, Black | | Net weight: | 17.6kg / 38.7lb | | Net Dimensions: | L385 x W340 x H390 mm
L15.16 x W13.39 x H15.35 in |
|
The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.
GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.
|
Reviews
There are no reviews yet.