GENELEC 7271A ACTIVE DSP SUBWOOFER

4,657.56 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Genelec 7271A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to an entirely new level. This powerful and precise low frequency monitoring solution is designed for modern 6.1 or 5.1 multi-channel systems as well as traditional stereo applications. With its 19 Hz lower cut-off frequency, high sound pressure output capability and […]

 

Read more

Genelec 7271A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to an entirely new level. This powerful and precise low frequency monitoring solution is designed for modern 6.1 or 5.1 multi-channel systems as well as traditional stereo applications.

With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile digital bass management system, the 7271A adapts to all low frequency monitoring situations.The amplifier unit is integrated into the enclosure containing active DSP crossover filters, driver overload protection circuits and power amplifiers.

The built-in bass management system supports eight input and output channels (four XLR connectors) for AES/EBU formatted digital audio. The main channels crossover frequency can be adjusted between 50 – 100 Hz.

118 dB
Main 19 – 100 Hz (± 3 dB)
LFE 19 – 120 Hz (± 3 dB)
0 to -270° (90° steps)
2 x 12“
500 W
H x W x D  755 x 803 x 490 mm
82 Kg (180 lb)
4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU)

 

Weight 82.00 kg

Reviews

There are no reviews yet.

Be the first to review “GENELEC 7271A ACTIVE DSP SUBWOOFER”

Your email address will not be published. Required fields are marked *

Quick Comparison

GENELEC 7271A ACTIVE DSP SUBWOOFER removeKALI AUDIO WS-12 SUBWOOFER ACTIVE 1000W removeYAMAHA SW-10 Studio Monitor removeGENELEC SE7261A ACTIVE DSP SUBWOOFER removeEVE AUDIO TS112 ACTIVE 12'' SUBWOOFER 400W RMS removeGENELEC 7070A ACTIVE SUBWOOFER remove
NameGENELEC 7271A ACTIVE DSP SUBWOOFER removeKALI AUDIO WS-12 SUBWOOFER ACTIVE 1000W removeYAMAHA SW-10 Studio Monitor removeGENELEC SE7261A ACTIVE DSP SUBWOOFER removeEVE AUDIO TS112 ACTIVE 12'' SUBWOOFER 400W RMS removeGENELEC 7070A ACTIVE SUBWOOFER remove
Image
SKU7271AWS12H000.00083SE7261AEV/EM/0000107070A
Rating
Price 4,657.56 incl. GR VAT 679.00 incl. GR VAT 899.00 incl. GR VAT 2,225.94 incl. GR VAT 1,205.00 incl. GR VAT 2,440.67 incl. GR VAT
Stock

Available on backorder

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Genelec 7271A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to an entirely new level. This powerful and precise low frequency monitoring solution is designed for modern 6.1 or 5.1 multi-channel systems as well as traditional stereo applications.

With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile digital bass management system, the 7271A adapts to all low frequency monitoring situations.The amplifier unit is integrated into the enclosure containing active DSP crossover filters, driver overload protection circuits and power amplifiers.

The built-in bass management system supports eight input and output channels (four XLR connectors) for AES/EBU formatted digital audio. The main channels crossover frequency can be adjusted between 50 - 100 Hz.

118 dB
Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB)
0 to -270° (90° steps)
2 x 12“
500 W
H x W x D  755 x 803 x 490 mm
82 Kg (180 lb)
4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU)

 

The WS-12 is a 1000W powered subwoofer for the studio and the stage. With frequency extension down to 23 Hz and 123 dB max SPL, it provides authoritative low end in any setting.

Power. Depth. Adaptability.

The WS-12 Subwoofer is the most powerful studio subwoofer available under $1000. It is made to be used with any near- or mid-field studio monitors, as well as with small portable PA systems in a live setting.

One of the key design specifications for the WS-12 is that it be capable of providing bass management in a 5.1 system where all of the full-range speakers are Kali IN-8s. As such, the WS-12 is powered by a 1000W power amplifier mated to a high-excursion 12-Inch driver.

This much power also makes the WS-12 a capable live subwoofer. Its enclosure is 18mm plywood and it has handles for easy carrying. Kali’s team made sure that it will fit in small passenger cars, so you can take it with you even when you’re calling a ride to get to your gig!

All this power is controlled by a robust, user-friendly DSP section that let you dial in the exact settings you need for your system. Whether you’re using it with a pair of LP-6s, as bass management in a 5.1 system, or on stage with a PA, it’s easy to configure the WS-12 to get exactly what you need.

The WS-12 was designed as a companion subwoofer for Kali’s LP- and IN-Series Studio monitors.

When used with a pair of Kali monitors, the subwoofer’s crossover and gain settings can be configured to precisely match those of the full-range monitors. With these settings dialed in, set the subwoofer between the speakers, and turn all speakers’ volume knob either to noon or all the way up. The subwoofer’s level will be exactly where it needs to in order to match the full- range speakers.

The WS-12 can be used for bass management in systems as large as 5.1 with any Kali monitors.

Convenient settings allow the use of an external crossover, and the WS-12 can even be configured as a dedicated Low Frequency Effects channel.
Powered: Yes
Amp Class: D
Continuous Power: 500W
Peak Power: 1000W
Driver Size: 12 Inches
Freq Response: (-10 dB): 23Hz - 160 Hz
Freq Response: (+/-3 dB): 30Hz - 160 Hz
Crossover: Selectable; See User\'s Manual
Max SPL: 123dB
Unbalanced Inputs: Stereo RCA
Balanced Inputs: Stereo TRS/XLR Combi Jack
Balanced Outputs: Stereo XLR
Other Inputs/Outputs: 1/4-Inch Footswitch Input
Enclosure: 18mm Plywood
Height: 19 Inches (48.3cm)
Depth: 17 Inches (43.2cm)
Width: 16 Inches (40.7cm)
Weight: 63 Lbs (29kg)

The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.

GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.

Genelec SE7261A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to smaller production environment. At the heart of the Genelec SETM (Small Environment) DSP loudspeaker system is the SE7261A DSP subwoofer with DSP processing.

The SE7261A DSP subwoofer provides all necessary network connections to the host computer and supply extensive DSP resources through its eight AES/EBU high-passed channels to the 8130A active loudspeakers.

The proprietary GLM.SETMsoftware kit includes a measurement microphone, AutoCalTM function and other key features of the standard GLM software.

108 dB
Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB)
GLM tone controls
10“
120 W
H x W x D  527 x 462 x 363 mm
27 Kg (59 lb)
4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU)

 

12" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Tech Talk

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS112 is our largest, "no-compromise" subwoofer. The highly efficient PWM amp is capable of 400 W of short term output power. The powerful amp, coupled with a large proprietary 12" woofer will guarantee you a clean frequency response down to 24Hz and up to 300Hz, for a maximum output power of 112 dB (SPL @ 1m). As with the highly efficient TS110, don't let your neighbours see you unloading this subwoofer into your house!

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

Passive Radiator

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

Frequency response curve

Product TS112
Description Subwoofer
Dimensions (WxHxD) [mm] 390 x 560 x 508
Dimensions (WxHxD) [“] 15.35 x 22.05 x 20
Free-field frequency range (-3dB) 24Hz - 300Hz
Woofer 300mm/12“
Maximum SPL @ 1m 112dB
Number of amplifiers 1
Total short-term output power 400W
Protection limiter Yes
Settings
System volume (Satellite & Sub) -inf. - +6dB
Subwoofer volume -inf. - +6dB
Level-lock dip switch Yes
Filter-lock dip switch Yes
Input level dip switch +7dBu/+22dBu
Phase inversion 0°/180°
Switchable Satellite filter flat/80Hz
Variable Subwoofer filter 60Hz-140Hz + LFE
Remote control Sys. & Sub. Vol.
Connectors
XLR in left (impedance)  (10k)
XLR in right (impedance)  (10k)
XLR in LFE (impedance)  (10k)
XLR out satellite left (impedance)  (10k)
XLR out satellite right (impedance)  (10k)
XLR out (LFE) (impedance)  (10k)
Power consumption
Standby
Full output 410VA
Misc.
Weight kg/lb. 25.5 / 56.2

Genelec 7070A Active Subwoofer is powerful and precise bass monitoring tool for modern 6.1 or 5.1 channel Surround Sound or traditional stereo systems. With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile bass management systems, it can be adapted to all low frequency monitoring situations.

The amplifier unit integrated into the cabinet contains active crossover filters, driver overload protection circuits and power amplifiers.

The in-built bass management unit has six signal input and output channels, summed signal output connectors and LFE input equipped with a selectable 85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch.

112 dB
Main 19 - 85 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB)
0 to -270° (90° steps)
12" Active
250 W
H x W x D  625 x 555 x 490 mm
50 Kg (110 lb)
6.1 XLR analog in
6 x XLR analog out
1 x XLR Link out

 

Weight82.00 kg30.00 kg26.50 kg27.00 kg25.50 kg50.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 82.00 kg
Weight 30.00 kg
Weight 26.50 kg
Weight 27.00 kg
Weight 25.50 kg
Weight 50.00 kg