| Content |
In the studio, the Les Paul Reference Monitors provide superior instrument definition, imaging, and transient response for accurate mixing and mastering of all musical genres. And in the home, these premium two-way speakers deliver the pristine sound quality that artists hear in the studio.
Why Theyʼre Better
- Experience exceptional midrange definition, and superb transient response, from a unique, lightweight driver design coupled with high-power amplification
- Mixes translate better because the precision 1" titanium tweeter produces accurate highs, while the front-ported, bass-reflex enclosure delivers tight, precise bass
- Iconic archtop Les Paul styling with carved flame-maple front brings visual excitement to studio or home
- Personalize your sound with rear-panel high and low frequency trim controls
- Avoid "listening fatigue” thanks to extremely low distortion, ample headroom, and transparent sound reproduction
- Complement any room design with your choice of high-gloss nitrocellulose cherry, cherry burst, or tobacco burst finishes
|
DM-2100: 2.1-ch Speaker System
Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.
- Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
- Powered bass reflex speakers with 15 watts per side and flat frequency response
- Active subwoofer with 50-watt amplifier for increased low end
- Front-mounted controls convenient located on right speaker
- Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
- Sleek black wooden cabinets with magnetic shielding
Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight
Size and Weight ( SubWoofer )Width240 mm9-1/2 inchesDepth300 mm11-13/16 inchesHeight330 mm13 inches
|
PRICE PER UNIT
The smallest big sound ever... With the A3X, ADAM Audio present their smallest monitor to date, making it perfectly suited for all environments where space is limited but sound shouldnʼt be constricted. The A3X combines a tiny footprint with the much acclaimed ADAM sound quality by using the X-ART tweeter for the higher frequencies, a guarantee for crystal clear music reproduction. A 4.5” (basket) driver handles the lower registers. The diaphragm is made from carbon fiber, a material that is very light but very stiff and therefore capable of delivering colouring-free sound. Two built-in 25 Watt amplifiers powers each of the drivers directly. Stereolink A very handy and exclusive technology found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker. This new technology connects two A3X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakerʼs gain control. This makes the A3X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily. Controls and Connectors The front of the A3X sports dual ports for surprisingly low frequency response down to 60Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting. Review: "Highly recommended“ "Iʼve used various monitors for my computer work before, but never of the caliber of the A3X series. Before these, I would have to redo my mixes significantly when transitioning from the small cheapies to the big 'real ones'. The ADAM Audio A3Xʼs save me a step by providing both great sound in a compact format and by changing mundane audio task-work into a quality listening experience. If you use good monitors from the outset, youʼll learn your music that much faster so that when it comes time for mixdown and mastering on your big boxes, youʼll already be acclimated to your songʼs subtler sonic aspects—aspects revealed only by the A3Xʼs with their sweet, smooth top end, and impressive handling of bass frequencies. Highly recommended.“
(Jon Chappell, Harmony Central, 03/10) Review: "...one of the best compact monitors“ "ADAM´s A3X as the smallest monitor with a X-ART tweeter to date has convinced us in every respect. It´s one of the best compact monitors we have ever reviewed and with its almost shameless low price it´s worth every penny. (Professional Audio, 05/10) | Mid-Woofer |
| | Number | 1 | | Basket Ø | 4.5" (120 mm) | | Voice coil Ø | 1" (25 mm) | | Cone material | Carbon Fiber | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Mid-Woofer | 1 | | Type | A/B | | Amp. power RMS / music | 25 W / 40 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 25 W / 40 W | | Control panel |
| | Input Sensitivity | -∞ to +14 dB | | Tweeter gain | ±4 dB | | Input connectors |
| | Analog | XLR / RCA | | General data |
| | Frequency response | 60 Hz - 50 kHz | | THD 90dB/1m > 100 Hz | ≤0.8 % | | Long term output | ≥98 dB | | Max. peak | ≥106 dB | | Crossover frequencies | 2800 Hz | | Input impedance | 10 KOhm | | Weight | 10.1 lb (4,6 kg) | | Magnetically shielded | No | | Height x Width x Depth | 10" (252 mm) x 6" (150 mm) x 7.5" (185 mm) | | Warranty | 5 Years |
| Delivery contents | | Cinch-cable, Power cord, Manual |
|
PRICE PER UNIT
S2X
The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.
The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.
Review at a glance: "Sonic sensation“
“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)
“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind [...] - wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving... [...] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. [...] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. [...] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)
| Woofer |
| | Number | 1 | | Basket Ø | 7.5" (186 mm) | | Voice coil Ø | 2" (50 mm) | | Cone material | HexaCone | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Woofer | 1 | | Type | PWM | | Amp. power RMS / music | 250 W / 350 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 50 W / 100 W | | Control panel |
| | Input Sensitivity (coarse) | -20 to +8 dB (4 dB steps) | | Input Sensitivity (fine) | -1.5 to +2 dB (0.5 dB steps) | | EQ 80 Hz | 0 to +6 dB (1 dB steps) | | High Shelf EQ > 6 kHz | ±4 dB (1 dB steps) | | Low Shelf EQ | ±4 dB (1 dB steps) | | Tweeter gain | ±2 dB (0.5 dB steps) | | Input connectors |
| | Analog | XLR | | Digital (optional) | AES/EBU / SPDIF / word clock | | General data |
| | Panel | Front | | Frequency response | 35 Hz - 50 kHz | | THD > 80 Hz | ≤0.8 % | | Long term output | ≥110 dB | | Max. peak | ≥120 dB | | Crossover frequencies | 2200 Hz | | Input impedance | 10 KOhm | | Weight | 23.8 lb (10,8 kg) | | Magnetically shielded | Optional | | Height x Width x Depth | 14.5" (370 mm) x 8.5" (220 mm) x 12.5" (320 mm) | | Warranty | 5 Years |
| Delivery contents | |
Power cord, Manual
|
|
The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.
Specifications | Frequency response : | 40Hz - 40kHz | | Maximum SPL : | 115dB SPL (peak @ 1m) | |
Input :
|
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
| | Bass/mid-range : | 2x150W rms, BASH® technology | | Treble : | 100W rms, AB class | |
Electric supply :
|
Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire
| |
Visualization and control :
|
Input sensitivity selector
Mid-range speaker selector (right/left)
Adjustable tweeter and woofer levels by potentiometer
Power on/off
Voltage selector
| | warning light : | Power on LED | |
Electric supply :
|
Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire
| | Woofer : | 2x6W4370B Focal "W" composite sandwich cone 6-1/2" (16.5cm) speaker | | Tweeter : | TB871, Focal inverted dome tweeter in Beryllium | | transducer shielding : | Integral through cancellation magnets or by magnet design | | Box : | 7-1/2" (19mm) MDF panels | |
Finish :
|
Dark red natural veneering side panels, black body
| | Dimensions (HxWxD) : | 9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm) | | Weight : | 30.8lb (14kg) |
|
* Active studio monitors with USB audio interface
* 4.25-inch magnetically shielded, inverted cone, copolymer woofer
* 1-inch silk dome high frequency driver
* 2 x 20 watts of internal stereo power
* Two combination mic and instrument/line inputs
* Two 1/8-inch stereo headphone outputs with level controls
* Includes Cakewalk® Sonar LE music production software
* Mic and instrument/line gain control with clip LED
* 16-bit 44.1kHz/48kHz
* Stereo RCA and 1/8-inch aux inputs
* 2-position switch for no-latency direct stereo and mono monitoring
* Mix control to balance computer and audio sources
* USB and speaker cable included
|
Reviews
There are no reviews yet.