Content |
The FC 4 ST is a matched (within 1 dB) stereo pair of two FC 4 microphones. Specs below.
The FC 4 is a low cost, small capsule, true condenser microphone with transformerless discrete low noise class-A electronics. The 20 mm, 3 um gold-sputtered diaphragm has a cardioid shaped polar pattern and a great sensitivity.
The characteristics of the FC 4 are ideal for many recording and live situations. It will catch the crispness of your favourite guitar, every detail of your acoustic piano, the complexity of a clean electric guitar, the raw power of distorted amps, etc.
We have equipped the FC 4 with high-pass filter and pad switches. This also makes it suitable for loud sounds and even vocal recording.
Every musican and studio have use for a couple of FC 4´s. The small capsule cardioid condenser mic is one of the most basic mics for recording. The FC 4 is truly a great sounding and very versatile microphone at a very low price! |
The ME 67 is a long gun microphone head designed for use with the K6 and K6P powering modules. A highly directional microphone, it can be used where the microphone must be placed at a distance from the sound source. Matt black, anodised, scratch-resistant finish.
Pick-up pattern : lobar
Sensitivity in free field, no load (1kHz) : 50 mV/Pa +- 2,5 dB
Nominal impedance : 200 Ohm (K6)
Min. terminating impedance : 1000 Ohm (K6)
Equivalent noise level : 10 dB
Dimensions : d 22,5 x 343 mm
Weight : 100 g
| Specifically designed for cymbal and overhead miking, the frequency response of the C 430 ensures a unique crisp sound. With its extremely compact external dimensions, this microphone will keep a low profile on the drum kit without compromising audio quality. Response is 20-20kHz, with 126dB max SPL, and requires phantom power.
Specifications
Polar Pattern: cardioid
Frequency Response: 20?20.000 Hz
Sensitivity: 7 mV/Pa=-43 dBV to 1 V/Pa
Max. SPL for 1% / 3% THD: 126/130 dB SPL
Equivalent Noise Level: 33 dB to DIN 45 412
Electrical Impedance: 200 ohms
Recommended Load Impedance: >2.000 ohms
Power Requirement: 9 to 52 volts universal phantom power
Current Consumption: approx. 2 mA
Connector : 3-pin XLR
Cable Length: 1.5 m (5 ft.)
Finish: matte black
Size : dia.: 19 mm (0.7 in.), length: 79 mm (3.1 in.)
Net / Shipping Weight: 23/192 g (0.8/6,8 oz.)
Optional Accessorires: B15, B18 |
Technical specifications Polar pattern | | hypercardioid | Frequency range | | 50 to 20,000 Hz | Sensitivity | | 20 mV/Pa (?34 dBV) | Max. SPL | | 125 dB (k=1 %) | Equivalent noise level | | 21 dB-A | Signal/noise ratio (A-weighted) | | 73 dB | Impedance | | 600 ohms | Recommended load impedance | | >2000 ohms | Supply voltage | | 9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules) | Current consumption | | | Connector | | Discreet Acoustics Modular standard | Finish | | matte dark gray | Dimensions | | 13.5 x 20 mm dia. (0.5 dia. x 0.8 in.) | Net weight | | 5 g (0.17 oz.) | Shipping weight | | 88 g (3.1 oz.) | Accessories (included) | | W 30 |
| NT3 - Versatile & Dependable
Stylish and modern, the NT3 is a studio and location workhorse. With both
48V phantom and internal 9V battery operation, this R?DE is at home anywhere.
Intended for studio, stage and location work, this versatile handheld or stand
mounted microphone incorporates a true externally polarized condenser (hyper-
cardioid polar response) transducer with an internal capsule shock mounting
system, and an ultra-low noise electronic circuit that has a high immunity to R.F.
interference. Incorporating a rugged welded and heat-treated mesh head and all
metal body. The NT3 is supplied in a zip pouch with a windshield, stand mount
and thread adaptor.
SPECIFICATIONS:
Acoustic principle: Externally polarised 19mm (3/4“) condenser
Directional pattern: Hypercardioid
Frequency range: 20Hz-20 kHz
Output impedance: 200?
Signal noise ratio din iec 651: > 77dB (per IEC268-15)
Equvalent noise: 123dB (per IEC268-15)
Power supply voltage: P48, P24, P12 phantom 9V battery
Weight without battery: 371g
Weight with battery: 680g |
The ME 62 is an omni-directional microphone head suitable for K6 and K6P
powering modules. It can be used for reporting, discussions and interviews.
The ME 62 is particularly suitable for good reproduction of 'room' ambience
and 'spaced omni' stereo recording. Matt black, anodised, scratch-resistant finish.
Features
Omni-directional pick-up pattern
Minimal inherent self-noise
Excellent rejection of rumble, wind and handling noise
Wide frequency response
High maximum sound pressure level
Integral pop filter
Delivery Includes
1 ME 62
Technical Data
Pick-up pattern omni
Sensitivity in free field, no load (1kHz) 31 mV/Pa +- 2,5 dB
Nominal impedance 200 Ohm (K6)
Min. terminating impedance 1000 Ohm (K6)
Equivalent noise level 15 dB
Equivalent noise level weighted as per CCIR 468-3 27 dB
Dimensions d 22,5 x 94 mm
Weight 30 g
|
Reviews
There are no reviews yet.