Gravity SP 3202 Studio Monitor Speaker Stand

70.21 incl. GR VAT

Available on backorder

EAN: 4049521206559
Installments calculation
CompareAdd to wishlist Submit Better Price
The Gravity GSP 3202 studio monitor stand has a heavy, triangular cast iron base. And the monitor tray is 250 mm x 250 mm in size with foam pads for damping. It is height-adjustable from 900 mm to 1500 mm for optimum speaker positioning and comes with a set of spikes. Mounted to the integrated […]

 

Read more

The Gravity GSP 3202 studio monitor stand has a heavy, triangular cast iron base. And the monitor tray is 250 mm x 250 mm in size with foam pads for damping. It is height-adjustable from 900 mm to 1500 mm for optimum speaker positioning and comes with a set of spikes. Mounted to the integrated large rubber feet, they achieve an effective coupling to the floor.

Product type
Stands and Tripods


Type
Speaker Stands


Tubing material
Steel


Tubing colour
Black


Tubing surface
Powder coated


Min height
900 mm


Max height
1500 mm


Height adjustment
Clamp with safety pin


Base type
3-point


Base material
Cast iron


Base edge length
292.5 mm


Lower connector
M20


Tubing diameter
42 mm / 35 mm


Max. load
50 kg


Interchangeable rings
1 x 25 mm , 1 x 30 mm


Weight
6,5 kg


Additional information
Including acoustic isolation spikes

Weight 6.50 kg

Reviews

There are no reviews yet.

Be the first to review “Gravity SP 3202 Studio Monitor Speaker Stand”

Your email address will not be published. Required fields are marked *

Quick Comparison

Gravity SP 3202 Studio Monitor Speaker Stand removeGravity SP 3102 TM Flexible studio monitor stand with table clamp removeTOA HY-PF1B FRAME-NEW- removeAdam Hall SPADECO2 - Isolation Pad for Studio Monitors 265 x 330 mm (Pair) removeWHARFEDALE Linton Speaker Stand Walnut (Ζεύγος) removeAdam Hall SKDB 040 Rugged Studiomonitor Stand with Spacious Tray remove
NameGravity SP 3202 Studio Monitor Speaker Stand removeGravity SP 3102 TM Flexible studio monitor stand with table clamp removeTOA HY-PF1B FRAME-NEW- removeAdam Hall SPADECO2 - Isolation Pad for Studio Monitors 265 x 330 mm (Pair) removeWHARFEDALE Linton Speaker Stand Walnut (Ζεύγος) removeAdam Hall SKDB 040 Rugged Studiomonitor Stand with Spacious Tray remove
ImageGSP3102TM_gravity_artsound_stand_monitor_with_clamp_black_faceWHARFEDALE Linton Bάσεις Hχείων Walnut (Ζεύγος) - Wharfedale
SKUGSP3202GSP3102TMHY-PF1BSPADECO2S999.31103SKDB040
Rating
Price 70.21 incl. GR VAT 65.67 incl. GR VAT 128.00 incl. GR VAT 24.96 incl. GR VAT 276.00 incl. GR VAT 54.85 incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 5 left in stock

Only 4 left in stock (can be backordered)

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderAvailable on backorderOnly 5 left in stockOnly 4 left in stock (can be backordered)Available on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Infinitely variable height adjustment
  • Tilt angle up to +/- 15°
  • 360° rotatable
  • EVA padded bearing surface
  • Anti-tip for the speaker
The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.Custom-made βάσεις δαπέδου για τα ηχεία Linton της Wharfedale
ContentThe Gravity GSP 3202 studio monitor stand has a heavy, triangular cast iron base. And the monitor tray is 250 mm x 250 mm in size with foam pads for damping. It is height-adjustable from 900 mm to 1500 mm for optimum speaker positioning and comes with a set of spikes. Mounted to the integrated large rubber feet, they achieve an effective coupling to the floor. Product type Stands and Tripods
Type Speaker Stands
Tubing material Steel
Tubing colour Black
Tubing surface Powder coated
Min height 900 mm
Max height 1500 mm
Height adjustment Clamp with safety pin
Base type 3-point
Base material Cast iron
Base edge length 292.5 mm
Lower connector M20
Tubing diameter 42 mm / 35 mm
Max. load 50 kg
Interchangeable rings 1 x 25 mm , 1 x 30 mm
Weight 6,5 kg
Additional information Including acoustic isolation spikes
Mastering and mixing professionals usually listen to music in ideal conditions in control rooms specifically designed for mastering and mixing. Studio monitors are either built into the wall or installed on expensive stands positioned just far enough away from studio furniture so that nobody can accidentally bump into them. In day-to-day life, however, most musicians, producers, podcasters, etc., put their monitors right on the table. Not because this is the best solution, but because there's not enough space available. Even if you invest in a good table stand in this case, you still have to live with the fact that people might walk by or carelessly move the entire structure and destroy your optimum listening set-up. Regular stands for studio monitors also need a lot of room on the table due to their lower base plate. Gravity® has tackled all these problems with the SP 3102 TM. The studio monitor stand features a table clamp to securely and safely attach the structure to tables with tabletops no thicker than 100 mm. Just like other Gravity® products, it can be tightened using a sturdy and handy knob. In contrast to conventional table stands which require a large base plate to not budge, SP 3102 TM's clamp base is only 10 × 7 cm and does not take up more space than a standard screen holder. The design of the studio monitors stands ensures that they do not stick too far out off the table. This ensures a greater distance between the listener and monitors even when tables aren't that deep, as well as the perfect speaker placement to find the sweet spot in the room. Everything stays put with the SP 3102 TM thanks to its clamp that keeps stands fixed in position. In addition, the SP 3102 TM is fully equipped to help you perfectly align the monitors into the listening position. The stand has clearly visible markings to adjust the height, rotation, and tilt. There's also EVA padding and an anti-tipping device to make sure your valuable monitors rest securely on the upper shelf, even when tilted up to 15°. You can now sit back and enjoy the sweet spot!
 
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder-coated
Min height
250 mm
Max height
350 mm
Tilt angle
+/- 15 °
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Base material
Steel
Base edge length
100X70 mm
Max. load
25 kg
Interchangeable rings
1 x 15 mm , 2 x 30 mm
Black ring pack included
Yes
Weight
2,7 kg

HY-PF1B

RIGGING FRAME FOR INDOOR USE

Isolation Pad for Studio Monitors 265 x 330 mm The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles. Product type Other Studio and Recording Equipment
Material High density acoustic foam
Colour charcoal
Setup 2-layer
Foam density 38 kg/m
Width 265 mm
Height 40 mm
Depth 330 mm
Weight 0,22 kg
Xαρακτηριστικά  : Eιδικά κατασκευασμένες βάσεις δαπέδου για τα ηχεία Wharfedale Linton Kομψός σχεδιασμός Προσφέρει εξαιρετικό damping Tοποθετεί τον άξονα ακρόασης του ηχειου , στο βέλτιστο σημείο Διαστάσεις  (YxΠxB): 43,68 x 29.97 x 33.02 cm.
  • Steel tray with isolating foam rests
  • Black powder coating
  • 40 kg max. load capacity
  • Includes spikes and cable clips
This 86 cm high loudspeaker stand is ideal for studio monitors and home speakers and is fitted with a triangular foot with an edge length of 44.5 cm. The foam-padded steel tray provides 28 x 28 cm standing space, which is sufficient for all standard monitor speakers. The exceptionally sturdy design made with black powder-coated steel carries a maximum weight of 40 kg. Delivery also includes 4 cable clips for tidy cable organisation, as well as a set of steel spikes. Product type Stands and Tripods
Type Speaker Stands
Tubing material Steel
Tubing colour Black
Tubing surface Powder coated
Min height 860 mm
Max height 860 mm
Height adjustment no
Base type triangle
Base edge length 445 mm
Max. load 40 kg
Weight 4,87 kg
Additional information Cable routing (4 Pcs.) and spikes (3 Pcs.) included
Weight6.50 kg4.00 kg3.60 kg0.20 kg15 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.50 kg
Weight 4.00 kg
Weight 3.60 kg
Weight 0.20 kg
Weight 15 kg
Weight 5.00 kg