| Description | | The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles. |
- Infinitely variable height adjustment
- Tilt angle up to +/- 15°
- 360° rotatable
- EVA padded bearing surface
- Anti-tip for the speaker
| Professional productions need a big studio - this guiding principle was considered irrefutable for decades. Today, entire albums are produced in small home studios. Getting the most out of a cramped environment requires compact and well thought-out solutions, like the Gravity® SP 3102 CB studio monitor table stand.
With the SP 3102 CB, you can place your studio monitors directly on your desk without worrying about stability or taking up too much space. Thanks to the continuously height adjustment, the monitoring speakers can be precisely aligned with your sitting position - and the stereo triangle is ready!
The SP 3102 CB is based on a robust steel construction that ensures a secure stand for your studio monitors. The rubberised non-slip feet on the bottom of the table base and the EVA-padded bearing surface for the speaker also contribute to this.
The Gravity® SP 3102 CB is the ideal solution for small tables and storage areas in home studios and is aimed at users who do not want to give up on a stable stand and precise alignment of the monitors even in cramped environments. | | The Nowsonic Shock Stop M is a budget solution for optimizing the sound in your studio. The absorbers are designed to eliminate the transfer of vibrations from your studio speakers to the stand surface. They are therefore a simple and effective way to protect against resonance and provide a more linear transmission. The modular design also means different dispersion angles can be achieved. |
| Content | The Gravity GSP 3202 studio monitor stand has a heavy, triangular cast iron base. And the monitor tray is 250 mm x 250 mm in size with foam pads for damping. It is height-adjustable from 900 mm to 1500 mm for optimum speaker positioning and comes with a set of spikes. Mounted to the integrated large rubber feet, they achieve an effective coupling to the floor.
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height
900 mm
Max height
1500 mm
Height adjustment
Clamp with safety pin
Base type
3-point
Base material
Cast iron
Base edge length
292.5 mm
Lower connector
M20
Tubing diameter
42 mm / 35 mm
Max. load
50 kg
Interchangeable rings
1 x 25 mm , 1 x 30 mm
Weight
6,5 kg
Additional information
Including acoustic isolation spikes | The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.
Product type
Other Studio and Recording Equipment
Material
High density acoustic foam
Colour
charcoal
Setup
2-layer
Foam density
38 kg/m
Width
170 mm
Height
40 mm
Depth
300 mm
Weight
0,12 kg |
Mastering and mixing professionals usually listen to music in ideal conditions in control rooms specifically designed for mastering and mixing. Studio monitors are either built into the wall or installed on expensive stands positioned just far enough away from studio furniture so that nobody can accidentally bump into them. In day-to-day life, however, most musicians, producers, podcasters, etc., put their monitors right on the table. Not because this is the best solution, but because there's not enough space available.
Even if you invest in a good table stand in this case, you still have to live with the fact that people might walk by or carelessly move the entire structure and destroy your optimum listening set-up. Regular stands for studio monitors also need a lot of room on the table due to their lower base plate.
Gravity® has tackled all these problems with the SP 3102 TM. The studio monitor stand features a table clamp to securely and safely attach the structure to tables with tabletops no thicker than 100 mm. Just like other Gravity® products, it can be tightened using a sturdy and handy knob. In contrast to conventional table stands which require a large base plate to not budge, SP 3102 TM's clamp base is only 10 × 7 cm and does not take up more space than a standard screen holder. The design of the studio monitors stands ensures that they do not stick too far out off the table. This ensures a greater distance between the listener and monitors even when tables aren't that deep, as well as the perfect speaker placement to find the sweet spot in the room.
Everything stays put with the SP 3102 TM thanks to its clamp that keeps stands fixed in position. In addition, the SP 3102 TM is fully equipped to help you perfectly align the monitors into the listening position. The stand has clearly visible markings to adjust the height, rotation, and tilt. There's also EVA padding and an anti-tipping device to make sure your valuable monitors rest securely on the upper shelf, even when tilted up to 15°. You can now sit back and enjoy the sweet spot!
Product type
Stands and Tripods
Tubing surface
Powder-coated
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Base edge length
100X70 mm
Interchangeable rings
1 x 15 mm , 2 x 30 mm
Black ring pack included
Yes
|
| Product type |
Stands and Tripods |
| Type |
Speaker Stands |
| Material |
Steel |
| Color |
Black |
| Min. height |
150 mm |
| Max. height |
250 mm |
| Bearing surface |
160 x 180 mm, EVA padded |
| Height adjustment |
Adjusting screw |
| Base material |
Steel |
| Base edge length |
220 x 205 mm |
| Max load |
15 kg |
| Interchangeable rings |
1 x 30 mm |
| Black ring pack included |
Yes |
| Weight |
4,4 kg |
|
- Rubber support surface for a stable stand of the monitors
- Robust construction; Tilt angle ± 10 degrees
- Variable table mounting (max. 55mm)
- Height adjustable in 4 steps from 235mm to 280mm
- Monitor support surface: 220mm x 180mm
- Maximum load: 15kg
- Weight: 1,45kg
| Features
- Absorber panels made of high-density-foam
- Optimizes the acoustic performance of your speakers
- 3 different inclination angles
- Suitable for near-field monitors
Specifications
- Color: anthracite
- Size: M
- Dimensions: 250 x 320 mm
- Weight: 250 g
Scope of delivery
Applications
- Damping of vibrations and resonances of studio and hi-fi loudspeakers
- Correction of the inclination of studio and hi-fi loudspeakers
- Height adjustment of studio and hi-fi loudspeakers
|
Reviews
There are no reviews yet.