| Content | The Gravity studio monitor stand GSP 3202 VARI-TILT® features a heavy, triangular base made of cast iron and a 25x25 cm steel tray with isolating foam rests. It is tilt-adjustable by 10° and height-adjustable from 90 to 150 cm for optimum speaker positioning. The stand is supplied with a set of spikes. Mounted on the large, integrated rubber feet, these ensure effective coupling to the floor.
Product type
Stands and Tripods
Tubing surface
Powder coated
Height adjustment
Clamp with safety pin
Base edge length
292.5 mm
Tubing diameter
42 mm / 35 mm
Centic load capacity (without spikes)
30 kg
Centic load capacity (with spikes)
10 kg
Interchangeable rings
1 x 15 mm, 1 x 20 mm, 1 x 30 mm
Black ring pack included
Yes
Additional information
Including acoustic isolation spikes
|
42" (106cm) Fixed Height Near-Field Monitor / Speaker Stand
![]() Perfect for home, project or professional recording studios
![]() All-steel, arc welded construction. NO fibre or chipboard
![]() Attractive design incorporating cable management
![]() Solid triangular base with adjustable levelling floor spikes
![]() Vertical columns may be sand loaded to deaden sound and increase stability
![]() Sturdy metal top plate measures 11" square (28 cm)
![]() 120 lb (54 kg) weight capacity
Speaker plate dimensions: 11" square - 28cm square
Fixed Height: 42" - 106.6 cm
Base Size: 17.7" square - 45 cm square
Weight capacity: 125 lb - 57kg
Weight: 14.6 lb - 6.6 kg
| The Fluid Audio DS5 desktop monitor stands are designed for use with all 4” and 5” 2-way studio monitors. They come with the ability to elevate your monitors to two heights: 2.5” and 5”. With the included rubber feet, the stands become an acoustic isolation system that can adjust to 3 angles: Flat, 3 and 6 degrees of tilt.
Elevating your monitors closer to ear-level means you get better on-axis response. As the high frequencies coming from tweeters can be somewhat directional (or "beamy”), getting them up and closer to ear level means you hear a more full-frequency response. Made from MDF wood (the same material as your monitor enclosures) they are rugged and acoustically well damped. The stand "posts” are made with polypropylene, minimizing the "ringing” sound of ABS plastic. Both top and bottom of the stands are capped off with extremely absorbent, 40 durometer rubber feet. The result of the stand construction allows your monitors to "breathe” and to produce much purer tones and a less distorted midrange.
Package Contents
- 4 x 2.5” stand "posts”
- 4 x 5” stand "posts”
- 4 x middle stabilizers
- 10 rubber feet (10mm)
- 5 rubber feet (18mm)
- 10 screws (for mounting posts)
Features
- Fits all 4” and 5” studio monitors
- Allows for 2 height adjustments: 2.5” and 5”
- Allows for 3 angle adjustments: Flat, 3 deg and 6 deg
Specifications/Material
- Middle stabilizers: Vinyl-laminated MDF
- Stands: Polypropylene plastic
- Rubber: Highly absorbent, 40 Durometer
- Size (packed): 5.94 x 7.44 x 4.5”
- Max load 10kg per unit
- Weight: 0.9kgs/giftbox
Measures
- Total depth: 185mm
- Distance between front and rear rubber support: 127mm
- Total width: 142mm
- Distance between left and right rubber support: 117mm
|
| Product type |
Stands and Tripods |
| Type |
Speaker Stands |
| Material |
Steel |
| Color |
Black |
| Min. height |
150 mm |
| Max. height |
250 mm |
| Bearing surface |
160 x 180 mm, EVA padded |
| Height adjustment |
Adjusting screw |
| Base material |
Steel |
| Base edge length |
220 x 205 mm |
| Max load |
15 kg |
| Interchangeable rings |
1 x 30 mm |
| Black ring pack included |
Yes |
| Weight |
4,4 kg |
|
- Rubber support surface for a stable stand of the monitors
- Robust construction; Tilt angle ± 10 degrees
- Variable table mounting (max. 55mm)
- Height adjustable in 4 steps from 235mm to 280mm
- Monitor support surface: 220mm x 180mm
- Maximum load: 15kg
- Weight: 1,45kg
| A mix's sound and feel is heavily influenced by having your monitors placed in the proper position. In a home studio, however, where space is at a premium, it's not always possible to put your studio monitors right next to a table using suitable stands. The Gravity SP 3102 is the solution to this problem. The flexible, powder-coated steel stand squeezes onto pretty much any desk. The edge of the solid base is only 25 cm in length. Monitor boxes weighing up to 25 kg can be flexibly positioned at the height you want, and EVA padding and tilting protection make it possible to vertically angle them by up to 15° and horizontally rotate them 360°, meaning you can always find the perfect position for your studio monitors. The colourful G-rings make a clear design statement and can be swapped out in mere seconds. An additional black ring set is also supplied with the product.
Product type
Stands and Tripods
Tubing surface
Powder-coated
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Interchangeable rings
1 x 20 mm , 1 x 30 mm
Black ring pack included
Yes
|
Reviews
There are no reviews yet.