Content |
- Durable, water repellent 600D nylon shell
- 10 mm foam padding
- Padded divider
- Dual zippers with single pull grip
- Carry straps positioned for even weight distribution
- Comfortable wrap-around handle
The BG SS 2 XLB is a heavy duty carry bag with 10 mm padding that holds two large speaker stands. The bag is made from tough 600D nylon that is water repellent and easy to clean, a padded divider keeps the stands separate to prevent scratches. The bottom and all other points of stress are reinforced for extra strength, two carry straps with comfortable wrap-around handle and the heavy gauge single pull zipper closure of the lid provide handling convenience.
Product type
Stands and Tripod Accessories
Type
Transport bag
For number of stands
2
For type of stand
Speaker tripod
Colour
Black
Material
Nylon 600D
Thickness of the padding
10 mm
Latch
Double zip
Width
1450 mm
Height
180 mm
Depth
280 mm
Weight
1,823 kg
Black ring pack included
no
|
The HY-CN1B-WP is used to join 2 HX-5 series speaker systems, typically for the purpose of achieving better speaker directivity control in lower frequencies. Such directivity control helps achieve clearer and longer-rangesound reproduction in locations where sound efficiency may be hampered by conditions like long reverberation time or a high level of background noise. This bracket is designed for outdoor use.
Finish | Stainless steel (SUS304), black, semi-gloss, paint | Weight | 200 g | Product Composition | Front bar bracket …2, Rear bar bracket …1 | Note: Every speaker module must be aimed horizontally or down to keep the weather resistant capability.
|
The HY-WM1W is used exclusively to mount the HX-5 series speaker system to a wall or ceiling. This bracket permits the speaker to be tilted downward up to 20%%d from the horizontal when the speaker is mounted on a wall, or tilted up to 20%%d from the vertical when the speaker is mounted on a ceiling. This bracket is designed for indoor use.
Finish | Steel plate, white, semi-gloss paint | Dimensions | 62 (W) × 142 (H) × 22 (D) mm | Weight | 750 g | Accessory | Speaker mounting bolt (M8) with washer …4 | Product Composition | Speaker mounting bracket …2 |
| Cabinet Flange
Top hat
Product type
Speaker Construction Accessories
Type
Cabinet Flange
Material
die-cast aluminium
Surface
Powder coated
Colour
Black
Suitable for tube diameter
35 mm
Flange size
109 mm
Installed depth / installation height
85 mm
Tiltable
no
With screw clamp
no
Weight
0,25 kg
Product type
Speaker Construction Accessories
Type
Cabinet Flange
Material
die-cast aluminium
Surface
Powder coated
Colour
Black
Suitable for tube diameter
35 mm
Flange size
109 mm
Installed depth / installation height
85 mm
Tiltable
no
With screw clamp
no
Weight
0,25 kg
|
GENERAL SPECIFICATIONS |
---|
Tube diameter: | 35/1.37 | mm/inch | Load capacity: | 35/77.16 | Kg/Lbs |
PHYSICAL SPECIFICATIONS |
---|
Height: | / | mm/inch | Width: | / | mm/inch | Depth: | / | mm/inch | Net Weight: | 1,45/3.19 | Kg/Lbs |
SHIPPING INFORMATION |
---|
Package height: | 70/2.75 | mm/inch | Package width: | 110/4.33 | mm/inch | Package depth: | 845/33.26 | mm/inch | Shipping Weight: | 1,704/3.75 | Kg/Lbs |
|
The HY-BH10B Board Hanger Bracket is used to mount F-1000 Series or F-1300 Series speakers to a temporarily installed partition board. The speaker can be installed in either a vertical or horizontal orientation.
Finish | Steel plate, black, paint | Dimensions | 48 (W) × 100 (H) × 108 (D) mm (1.89" × 3.94" × 4.25“) (excluding knob bolt) | Weight | 210 g (0.46 lb) | Product Composition | Hanger bracket …1, Sliding bracket …1, Knob bolt …1,
Plain washer for knob bolt …1, Speaker mounting bracket (with washer) …4 |
|
Reviews
There are no reviews yet.