Content | The GLSTBTV28 is a classic tripod lighting stand with twin extensions, made from thick walled, yet lightweight powder coated steel tubing. The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity. The unbreakable height adjustment collars are made of steel for additional strength and feature safety pins to securely lock the extensions in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. The stand includes a T-Bar with an ergonomically formed and rubberized T-Joint – making the T-Bar not only easier to handle and carry but also look better looking than regular stands.
Product type
Stands and Tripods
Type
Lighting Stands
Stand material
Steel
Truss material
Steel
Stand surface
Powder coated
Crossbar surface
Powder coated
Stand colour
Black
Number of extensions
2
Min. height
1450 mm
Max height
3250 mm
Transport length
1450 mm
Max. load
50 kg
Holding fixture for TV Spigot
Yes
TV spigot
28 mm
Crossbar length
1220 mm
Weight
9,2 kg | The LS 331 B lighting stand features a large heavy steel base providing a firm footing and a single extension for a maximum height of 2.4 m. The 35 mm pole includes a male threaded M20 insert, the base tube has a female M20 end. Two integrated base handles facilitate transport.
Product type
Stands and Tripods
Type
Lighting Stands
Tube material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height
1420 mm
Max height
2420 mm
Transport length
1420 mm
Height adjustment
set screw and safety pin
Number of extensions
1
Base material
Steel
Material of height adjustment
Steel
Tube diameter
35 mm
Dimensions Base (W x H x D)
563 x 563 x 15 mm
Base weight
14 kg
Interchangeable rings
1 x 30 mm
Black ring pack included
Yes
Max. load capacity
20 kg
Weight
17,8 kg |
- Large lighting stand with crossbar and TV spigot adaptors (length 123 cm).
- Including set of 4 screws with washer, safety disc and wing nuts
Product type
Stands and Tripods
Type
Lighting Stands
Stand material
Steel
Truss material
Steel
Stand surface
Powder coated
Crossbar surface
Powder coated
Stand colour
Black
Crossbar colour
Black
Number of extensions
2
Min. height
1700 mm
Max height
3500 mm
Tube diameter
35 mm
Transport length
1410 mm
Max. load
45 kg
Holding fixture for TV Spigot
Yes
TV spigot
28 mm
Crossbar length
1230 mm
Tiltable crossbar
no
Weight
8,56 kg |
- For 35mm stands
- Variable from 20cm to 40cm
- Punched markings for easy and centered positioning
- Safety pins included
Truss adapter for 35 mm tripod mounts (e.g. for speaker stands) with variable width (20-40 cm). Indentations for common truss systems facilitate set-up and ensure a central position. Locking pins and cotter pins are included.
Product type
Truss Accessories
Type
Truss adapter
Colour
silver
Material
Steel
Surface
galvanized
Suitable for tube diameter
35 mm
Adjustable Range
200 - 400 mm
Length
510 mm
Max. load capacity
50 kg
Weight
2,2869 kg | Proffesional wind up stand made of strenghtened steel loads up to 60kg. Installed ratchet lock protects fixed equipment against uncontrolled falling down and damage. Itʼs an ideal solution for mobile DJ and musicians.
Material: steel
Load capacity: 60 kg
Maximum height: 2,70 m
Base spread diameter: 1,54 m
Height: 1,60 m
Pipe diameter: 35 mm
Weight: 12 kg | Wind-Up Lightstand Max. load 30 kg
Three section, chrome plated steel stand with geared column. 3 sections. Tube diameters 55, 45, 38 mm. 2 risers extend simultaneously at one elevation of 4,4 cm per handle turn.
The 70104 Wind-Up Light Stand has a massive 30kg load capacity. The 3 Section Stand has a winding handle to make it easier to raise and lower large lights and diffusers. The handle has an self-locks for safety. A single clockwise revolution of the handle raises the stand 44mm while a counter-clockwise revolution will lower the stand by the same amount. The Wind-up Light Stand features a levelling leg that can be extended to adjust for an incline or uneven terrain. The stand includes a skid-proof footstep located at the main section of its base allowing access to its upper section to make adjustments if needed.
Technical Info
Length 193.36 cm
Width 23.5 cm
Height 23.5 cm
Weight 22.4 kg
Risers 2
Sections 3
1st Riser Diameter 55 mm
2nd Riser Diameter 45 mm
3rd Riser Diameter 38 mm
Leg Diameter 30 mm
Primary Material Chrome Plated Steel
Secondary Material Aluminum Locking Collars
Tertiary Material Stainless Steel Bolts
Leveling Leg Yes
Fixed Stand Adapter Triple Function Universal Head with 1-1/8 in (28 mm) and 5/8 in (16 mm) Receivers with Multi-Direction 5/8 in (16 mm) Stud
Stand Adapter Type Welded
Spring cushioned No
Closed Length 181 cm
Minimum Height 178.44 cm
Maximum Height 380 cm
Maximum Load 30 kg
Footprint Diameter 128 cm
Insertion diameter: 28 mm (standard TV spigot) |
Reviews
There are no reviews yet.