| Stock | Only 1 left in stock (can be backordered)
| Only 1 left in stock (can be backordered)
| Available on backorder
| Only 2 left in stock (can be backordered)
| Only 4 left in stock (can be backordered)
| Available on backorder
|
| Content |
- Light aluminium crossbeam
- Highly robust flange
- Quick-release clamp for safe installation in no time at all
This universal crossbeam quickly converts stands with a 35 mm tube diameter into a light stand. It is made with light but robust aluminium and is quickly and securely mounted thanks to its robust flange with fast-closing
Product type
Stands and Tripod Accessories
Type
Lighting Stands
Fitting
36 mm clamp
Material
die-cast aluminium
Surface
Powder coated
Colour
Black
Length
1235 mm
Max. load capacity
50 kg
Weight
1,673 kg
| Get the most out of your speakers and shine your lights from above - put them up on a stand. Providing firm support, the SLS 315 B has a braced tripod base and twin extensions for a maximum height of 3.1 m. This dual purpose speaker and lighting stand features a rugged all-steel construction with unbreakable plastic parts and 30 kg load capacity.
Adam Hall Stands SLS315B
Professional Speaker and Lighting Stand
- Rugged all-steel construction and unbreakable plastic parts
- Braced legs for high stability
- Twin extensions
- Set screw and safety pin height adjustment
- 30 kg load capacity
Product type
Stands and Tripods
Stand surface
Powder coated
Height adjustment
Clamp with safety pin
Material of height adjustment
Steel
|
Product type
Stands and Tripods Multimedia Equipment
Tubing surface
Powder-coated
Width adjusting jaws
40 mm
Width spacing between adjusting pins min.
120 mm
Width spacing between adjusting pins max.
425 mm
Height spacing between adjusting pins to adjusting jaws min.
117 mm
Height spacing between adjusting pins to adjusting jaws max
250 mm
Width spacing between adjusting jaws min.
130 mm
Width spacing between adjusting jaws max.
360 mm
Height adjustment
Set screw with safety split pin
Dimensions Base (W x H x D)
565 x 20 x 330 mm
Interchangeable rings
1 x 25 mm, 2 x 30 mm, 4 x 15 mm
Black ring pack included
Yes
| Wind-Up Lightstand Max. load 30 kg
Three section, chrome plated steel stand with geared column. 3 sections. Tube diameters 55, 45, 38 mm. 2 risers extend simultaneously at one elevation of 4,4 cm per handle turn.
The 70104 Wind-Up Light Stand has a massive 30kg load capacity. The 3 Section Stand has a winding handle to make it easier to raise and lower large lights and diffusers. The handle has an self-locks for safety. A single clockwise revolution of the handle raises the stand 44mm while a counter-clockwise revolution will lower the stand by the same amount. The Wind-up Light Stand features a levelling leg that can be extended to adjust for an incline or uneven terrain. The stand includes a skid-proof footstep located at the main section of its base allowing access to its upper section to make adjustments if needed.
Technical Info
Length 193.36 cm
Width 23.5 cm
Height 23.5 cm
Weight 22.4 kg
Risers 2
Sections 3
1st Riser Diameter 55 mm
2nd Riser Diameter 45 mm
3rd Riser Diameter 38 mm
Leg Diameter 30 mm
Primary Material Chrome Plated Steel
Secondary Material Aluminum Locking Collars
Tertiary Material Stainless Steel Bolts
Leveling Leg Yes
Fixed Stand Adapter Triple Function Universal Head with 1-1/8 in (28 mm) and 5/8 in (16 mm) Receivers with Multi-Direction 5/8 in (16 mm) Stud
Stand Adapter Type Welded
Spring cushioned No
Closed Length 181 cm
Minimum Height 178.44 cm
Maximum Height 380 cm
Maximum Load 30 kg
Footprint Diameter 128 cm
Insertion diameter: 28 mm (standard TV spigot) |
- Medium lighting stand with crossbeam
- Including set of 4 screws with washer, safety disc and wing nuts
Product type
Product type
Stands and Tripods
Stand surface
Powder coated
Crossbar surface
Powder coated
Holding fixture for TV Spigot
Yes
|
| Item Weight | 10 Kg | | Product Dimensions | 18.5 x 15.5 x 158 cm | | Item model number | STV-40S Steel Lighting Stand |
|
Reviews
There are no reviews yet.