Content | Griven AL-1430 DAISY IN 10?° LED Colour Changer
Technical Specifications
SOURCE
High brightness 1,2W power LED (Light-Emitting Diode) units
Continuously variable light intensity
1-100% electronic dimming facility
No UV
Virtually instant light production (100 ns)
Strobe facility (12 fps)
SOURCE LIFE
The LED light sources used have an exceptionally long life: predicted 100.000 hours
under normal operating conditions as mentioned by the LED manufacturer.
OPTICS
10?° beam angle (ordering code AL 1430 D-I ??? AL 1450 D-O ??? AL 1440 D-OUT)
30?° beam angle (ordering code AL 1432 D-I ??? AL 1452 D-O ??? AL 1442 D-OUT)
45?° beam angle (ordering code AL 1434 D-I ??? AL 1454 D-O ??? AL 1444 D-OUT)
Optional Frost ?¬lter for 10?° optics version
only (ordering code AL1436 D-I ??? AL1456 D-O ??? AL1446 D-OUT)
COLOUR VARIETY
RGB additive colour mixing for countless attractive saturated colours
Theoretical variety of 16.700.000 colour hues Pre-set selectable colour sequences and blends
CONTROL OPERATION
4 channels of DMX 512 standard protocol
Input and output DMX signal connectors
Optional remote control (ordering code AL 1320)
IP65 optional dedicated DMX controller(ordering code AL 1322)
20 CH DMX controller (ordering code GR0171)
Power CDI commander ??? DMX interface for PC (ordering code AD 4118)
LED D.O.P. Controller (ordering code AL 1419)
ELECTRICAL SPECIFICATIONS
Power supply:
standard 210-250V / 50-60Hz / 0,15 Amp. (with 8 projectors) class 2
optional: 90-120V / 50-60 Hz / 0,33 Amp.(with 8 projectors) class 2
200V / 50-60Hz / 0,17 Amp. (with 8 projectors)class2 (available on request)
Power Consumption: 4,5W per unit max at full intensity (full RGB)
Self-resetting fuse protection
Meets CE safety standards
HOUSING
D A I S Y- I N A L 1 4 3 0
Die cast metal (D-I), die-cast aluminium (D-O) and techno-polymer + steel (DOUT) body
Separate transformer unit box (powering up to 8 units ??? ordering code for 220V AL 1418 ??? for 110V AL 1420 )
Scratch resistant white ?¬nish (D-I), scratch resistant black ?¬nish (D-O), scratch resistant silver ?¬nish (D-OUT).
Full 360?° orientation capability.
Installation cut out size 100 mm indoor use IP20 (D-I);
Installation cut out size 101 mm outdoor use IP67 (D-OUT) 2000 kg load bearing
IP68 Class 2 (D-O).
EXTERNAL OPERATING LIMITS
-20?°C to 45?°C (-4?°F to 113?°F) temperature 0-95% relative humidity (non condensing)
WEIGHT
Daisy-On Unit = 0,5 Kg
IP65 separate transformer box = 2,5 Kg
DMX CHANNELS
Channel 1 - Red
Channel 2 - Green
Channel 3 - Blue
Channel 4 - Dimmer / Strobe |
James Thomas Pixerpar 90-IP40 RGB
90 high intensity Luxeon emitters Red, green and blue Luxeon K2 LEDs 16.7 million colour combinations Beam angle 6?° conical as standard, other beam angles available to order Pre-programmed with 2 overlapping sets of effects, each with 31 patterns Provides an alternative projection medium for video manipulation software DMX 512 digital input/output up to 3 channels Control via external source or stand alone master/slave On board diagnostics provides data and power information Auto setting power input 100 - 250V AC Low power consumption (135 watts) virtually no heat generated Internal quiet fan cooling system Robust metal construction Available in black and silver anodised, other colours available to order Dimensions 298mm(W) x 317mm(H) x 181mm(D) Weight 6.8kg IP40 rated |
Coemar LineaLed 3-50 RGB ST
Component Description
power supply 24V DC
number of channels 1
ambience temperature +20/+40?°C
led viewing angle 120?°
widht Flexible 8,5mm.
Stick 12 mm.
thickness 3,5mm.
colours available white
green
orange
red
blue
blue
led per metre Flexible
minimum 30 - maximum 100 led
for different density ask for quotation
Stick
standard lenght 505 mm.
power supply units available Regoled Dmx 3Ch - cod. E001
Switching power supply 100/240V AC 100VA 24V DC - cod. E016
Switching power supply 100/240V AC 200VA 24V DC - cod. E017/1
Switching power supply 100/240V AC 500VA 24V DC - cod. E018
|
Griven AL-1206 DAWN 45?° LED Colour Changer
Primarily intended for exterior architectural lighting purposes, DAWN is a high output and high quality IP66 rated colour changer. Fitted with the latest cutting edge technology using high brightness and high efficiency LEDs, which have a multitude of benefits, including low power consumption; no moving parts and long light source life, giving virtually maintenance free operation; light weight and compact size, giving easy handing and installation. DAWN'S LED light sources are a mixture of red, green and blue to produce, via RGB electronic mixing an endless palette of attractive pastel or deep colours, which can crossfade slowly or be snap changed as desired; the LEDs have instant response. The onboard control system gives stand alone colour sequence control, with master/slave selectable for multiple unit synchronization or Dawn can be controlled from the dedicated IP65 Controller or any DMX512 controller. A choice of beam angle options are available to suit most requirements, and the alternative lenses are also able to be purchased separately and retrofitted if required.
TECHNICAL SPECIFICATIONS
SOURCE High brightness 1,2W power LED (Light-Emitting Diode) units Continuously variable light intensity 1-100% electronic dimming facility No UV Virtually instant light production (100 ns) Strobe facility (12 fps)
SOURCE LIFE The LED light sources used have an exceptionally long life: predicted 100.000 hours under normal operating conditions.
OPTICS 10???£ beam angle (ordering code AL 1202) 30???£ beam angle (ordering code AL 1204) 45???£ beam angle (ordering code AL 1206) Optional Frost filter for 10???£ optics version only (ordering code AL 1302) Optional 10???£ beam set (ordering code AL 1314) Optional 30???£ beam set (ordering code AL 1315) Optional 45???£ beam set (ordering code AL 1316) Optional expansion filter (ordering code AL 1304)
COLOUR VARIETY RGB additive colour mixing for countless attractive saturated colours Theoretical variety of 16.700.000 colour hues Pre-set selectable colour sequences and blends
CONTROL OPERATION On-board Dip Switch set for digital data assignment and stand alone operation control Master and Slave 4 channels of DMX 512 standard protocol Input and output DMX signal connectors IP65 optional dedicated DMX controller (ordering code AL 1322)
ELECTRICAL SPECIFICATIONS Power supply: standard 210-250V / 50-60Hz / 0,15 Amp. optional 100-120V / 50-60Hz / 0,35 Amp. (available on request) Power Consumption: 36W max at full intensity (full RGB) Self-resetting fuse protection Meets CE safety standards
HOUSING Die cast aluminium body Scratch resistant silver-grey paint Easy mounting system for wall, ceiling and floor with full orientation capability Fixing yoke included Outdoor and indoor use IP66 protection rating
EXTERNAL OPERATING LIMITS -20?°C to 30?°C (-4?°F to 86?°F) temperature 0-95% relative humidity (non condensing)
WEIGHT 5,5 Kg
DMX CHANNELS Channel 1 - Red Channel 2 - Green Channel 3 - Blue Channel 4 - Dimmer / Strobe |
Griven AL-1460 DICE Led Colour Changer
DICE is a die cast aluminium wall-mounted ?¬tting, using a mixture of Red, Green and Blue (RGB) Lighting Emitting Diodes (LED) and creating, via RGB electronic mixing, an endless palette of attractive colours. Apart from the well-known ability of Griven lighting ?¬xtures to create colour changing effect DICE features the capability of projecting the light beam towards two different directions. Colour changing light shafts and cones in linear edge and corner applications are among the various effects offered by this brand-new LED ?¬xture.The IP66 weather protection rate makes the unit intended for exterior architectural lighting purposes and the digital control by any DMX512 signal allows an easy access to all functions.
Technical Specifications
SOURCE High brightness 1,2W power LED (Light-Emitting Diode) units Continuously variable light intensity 1-100% electronic dimming facility No UV Virtually instant light production (100 ns) Strobe facility (12 fps)
SOURCE LIFE The LED light sources used have an exceptionally long life: predicted 100.000 hours under normal operating conditions as mentioned by the LED manufacturer.
OPTICS 10?° beam angle (ordering code AL 1460)
COLOUR VARIETY RGB additive colour mixing for countless attractive saturated colours Theoretical variety of 16.700.000 colour hues Pre-set selectable colour sequences and blends
CONTROL OPERATION 4 channels of DMX 512 standard protocol Input and output DMX signal connectors Optional remote control (ordering code AL 1320) IP65 optional dedicated DMX controller(ordering code AL 1322) 20 CH DMX controller (ordering code GR0171) Power CDI commander ??? DMX interface for PC (ordering code AD 4118) LED D.O.P. Controller (ordering code AL 1419)
ELECTRICAL SPECIFICATIONS Power supply: standard 210-250V / 50-60Hz / 0,15 Amp. class 2 (w. 4 units) optional: 90-120V / 50-60 Hz / 0,33 Amp. class 2 (w. 4 units), 200V / 50-60Hz / 0,17 Amp. class 2 (w. 4 units) - available on request - Power Consumption: 9W per unit max at full intensity(full RGB) Self-resetting fuse protection Meets CE safety standards
HOUSING Die cast aluminium body Separate transformer unit box (powering up to 4 units (ordering code for 220V AL 1418 ??? for 110V AL 1420) Scratch resistant grey ?¬nish Easy mounting system - IP65 protection rating
EXTERNAL OPERATING LIMITS -20?°C to 45?°C (-4?°F to 113?°F) temperature 0-95% relative humidity (non condensing)
WEIGHT Unit = 1,65 Kg - IP65 Transformer box = 2,5 Kg
DMX CHANNELS Channel 1 - Red Channel 2 - Green Channel 3 - Blue Channel 4 - Dimmer / Strobe |
Griven AL-1412 PARADE D9 45?° LED Colour Changer
On its route along LED RGB colour changer innovation, Griven has implemented the choice with the modular PARADE D9 ?¬xture, using 9 high brightness, high ef?¬ciency LED light sources to offer highly ?¬?exible light output.The state of the art LED technology promises high reliability meaning minimal maintenance, and other advantages include durability, low power consumption, cool running and a quick light source response time. This newly designed unit features an IP67 weather protection factor for virtually any normal exterior application. Completely silent operation of course makes this unit also the ideal light source for a wide variety of indoor applications.PARADE D9 can be installed in any position and in any orientation, with the compact size and low weight assisting easy installation. The RGB (Red, Green, Blue) electronic colour mixing system, controllable from any DMX512 controller, gives an extraordinarily rich variety of colour hues. A choice of four different beam angle optics is available along with an asymmetrical option, too.
Technical Specifications
SOURCE High brightness 1,2W power LED (Light-Emitting Diode) units Continuously variable light intensity 1-100% electronic dimming facility No UV Virtually instant light production (100 ns) Strobe facility (12 fps)
SOURCE LIFE The LED light sources used have an exceptionally long life: predicted 100.000 hours under normal operating conditions as mentioned by the LED manufacturer.
OPTICS 10?° beam angle (ordering code AL 1408 D9) 30?° beam angle (ordering code AL 1410 D9) 45?° beam angle (ordering code AL 1412 D9) Optional Frost ?¬lter for 10?° optics version only (ordering code AL 1414 D9)
COLOUR VARIETY RGB additive colour mixing for countless attractive saturated colours Theoretical variety of 16.700.000 colour hues Pre-set selectable colour sequences and blends
CONTROL OPERATION 4 channels of DMX 512 standard protocol Input and output DMX signal connectors IP65 optional dedicated DMX controller(ordering code AL 1322) 20 CH DMX controller (ordering code GR0171) Power CDI commander ??? DMX interface for PC (ordering code AD 4118) LED D.O.P. Controller (ordering code AL 1419)
ELECTRICAL SPECIFICATIONS Power supply: standard 80-260V / 50-60Hz Power consumption: with 6 pcs. PARADE D9 18W, 230V / 0,08 Amp, 110V / 0,16 Amp (full RGB); Self-resetting fuse protection Meets CE safety standards
HOUSING Die cast aluminium body Separate transformer unit box (powering up to 6 units ??? ordering code AL 1416) Scratch resistant grey ?¬nish Easy mounting system IP67 protection rating
EXTERNAL OPERATING LIMITS -20?°C to 45?°C (-4?°F to 113?°F) temperature 0-95% relative humidity (non condensing)
WEIGHT D9 unit = 1,7 Kg IP65 separate transformer box = 3,5 Kg
DMX CHANNELS Channel 1 - Red Channel 2 - Green Channel 3 - Blue Channel 4 - Dimmer / Strobe |
Reviews
There are no reviews yet.