Griven AD-3233 Pantheon OS CYM 400 400W

2,624.46 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Griven AD-3233 Pantheon OS CYM 400 400W PANTHEON OS CYM 400, which is fitted with a metal halide HQI-TS 400W 6000 hours lamp, is equipped with an optical system that produces a long throw beam of approximately 46? Alternative beam angles can be achieved by optional expansion filters. The high IP65 rating against water and […]

 

Read more

Griven AD-3233 Pantheon OS CYM 400 400W

PANTHEON OS CYM 400, which is fitted with a metal halide HQI-TS 400W 6000 hours lamp, is equipped with an optical system that produces a long throw beam of approximately 46? Alternative beam angles can be achieved by optional expansion filters.
The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The colour mixing system with cyan, yellow and magenta dichroic filters creates virtually unlimited colour hues, coupled with smooth blends between colour changes. Colour sequences can be selected from a pre-programmed internal controller, with multiple unit synchronisation possible, or controlled from the IP65 CYM dedicated controller, or from any DMX512 control system.
A version of the Pantheon – PANTHEON OS CYM 400 HFT ?¨C is available fitted
with a wireless DMX receiver, for trouble free control of large or otherwise difficult
installations where the running of DMX signal cable from the control system to
the projector could be problematic. This system requires the use of Griven’s
wireless DMX transmitter. See dedicated section for more information.

LAMP
400 W, 28.000 lm, 5.600?°K
Metal halide lamp HQI-TS 400/D
Average rated life 6.000 hours
Special base
Ordering code LP1006

STANDARDS
Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I
Shock resistance: 0,8J.
Maximum ambient temperature: 35?°C.
Maximum operating temperature: 100?°C.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.

OPTICAL GROUP
The optical system utilises an aluminium ellipsoidal reflector and produces a soft edge beam of approximately 35?°. Additional filters are available for alternative beam adjustments.

COLOUR CHANGER SYSTEM
CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.

BLACK-OUT
A simulation of black-out effect is achieved by the simultaneous closing of all dichroic filters, which is controlled from an external DMX controller.

CONTROL
Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked – three channels of DMX per projector.

COOLING
An internal axial fan 80×80 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.

POWER SUPPLY
230 V, 50 Hz, 2,5 Amp

Weight 19.50 kg

Reviews

There are no reviews yet.

Be the first to review “Griven AD-3233 Pantheon OS CYM 400 400W”

Your email address will not be published. Required fields are marked *

Quick Comparison

Griven AD-3233 Pantheon OS CYM 400 400W removeCameo FLAT PRO FLOOD 600 IP65 Outdoor Flood Light with 9x12W RGBWA+UV 6-In-1 LEDs removeCameo THUNDER WASH 100 RGB 3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB removeGRIVEN GR 467 Gobostorm Projector SECOND HAND removeCameo FLAT PRO FLOOD IP65 TRI Outdoor Flood Light with 60 Watt Tri-Color COB LED in black housing removeGriven GR 456 Kolorado MK3 2500W remove
NameGriven AD-3233 Pantheon OS CYM 400 400W removeCameo FLAT PRO FLOOD 600 IP65 Outdoor Flood Light with 9x12W RGBWA+UV 6-In-1 LEDs removeCameo THUNDER WASH 100 RGB 3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB removeGRIVEN GR 467 Gobostorm Projector SECOND HAND removeCameo FLAT PRO FLOOD IP65 TRI Outdoor Flood Light with 60 Watt Tri-Color COB LED in black housing removeGriven GR 456 Kolorado MK3 2500W remove
Image
SKUPANTHEONOSCYCLFLOOD600IP65CLTW100RGBGR467CLFLOODIP65TRIGR456KOLORAD
Rating
Price 2,624.46 incl. GR VAT 390.60 incl. GR VAT 109.12 incl. GR VAT 1,178.00 incl. GR VAT 372.00 incl. GR VAT 4,258.65 incl. GR VAT
Stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Only 1 left in stock

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderOnly 1 left in stockOnly 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Griven AD-3233 Pantheon OS CYM 400 400W

PANTHEON OS CYM 400, which is fitted with a metal halide HQI-TS 400W 6000 hours lamp, is equipped with an optical system that produces a long throw beam of approximately 46? Alternative beam angles can be achieved by optional expansion filters.
The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The colour mixing system with cyan, yellow and magenta dichroic filters creates virtually unlimited colour hues, coupled with smooth blends between colour changes. Colour sequences can be selected from a pre-programmed internal controller, with multiple unit synchronisation possible, or controlled from the IP65 CYM dedicated controller, or from any DMX512 control system.
A version of the Pantheon - PANTHEON OS CYM 400 HFT ?¨C is available fitted
with a wireless DMX receiver, for trouble free control of large or otherwise difficult
installations where the running of DMX signal cable from the control system to
the projector could be problematic. This system requires the use of Griven's
wireless DMX transmitter. See dedicated section for more information.

LAMP
400 W, 28.000 lm, 5.600?°K
Metal halide lamp HQI-TS 400/D
Average rated life 6.000 hours
Special base
Ordering code LP1006

STANDARDS
Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I
Shock resistance: 0,8J.
Maximum ambient temperature: 35?°C.
Maximum operating temperature: 100?°C.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.

OPTICAL GROUP
The optical system utilises an aluminium ellipsoidal reflector and produces a soft edge beam of approximately 35?°. Additional filters are available for alternative beam adjustments.

COLOUR CHANGER SYSTEM
CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.

BLACK-OUT
A simulation of black-out effect is achieved by the simultaneous closing of all dichroic filters, which is controlled from an external DMX controller.

CONTROL
Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked - three channels of DMX per projector.

COOLING
An internal axial fan 80x80 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.

POWER SUPPLY
230 V, 50 Hz, 2,5 Amp

User\'s manual
Eco label
Photometric measurements
Daslight V3 fixtures
Fixture Library grandMA2

Cameo FLAT PRO FLOOD 600 IP65
Outdoor Flood Light with 9x12W RGBWA+UV 6-In-1 LEDs
  • Highly flexible IP65 outdoor flood light
  • Ultra flexible colour mixing with rich solid, warm pastel and UV colours
  • Flicker free
  • 6 modes of DMX control plus master, slave and standalone applications
  • 4-button display for intuitive operation
  • Security lock against unauthorized menu access
  • Durable compact size metal enclosure
  • Screw connectors for DMX and mains input and output
  • Incl. universal bracket

The Cameo FLAT PRO series FLOOD 600 IP65 is a compact RDM enabled outdoor flood light equipped with nine 12 watt 6-in-1 LEDs generating rich RGBWA colours, soft pastel hues and intense UV effects. The IP65 rated fixture sports convection cooling, a 40° beam angle and 3,000 Hz refresh rate for flicker free performance.

The hardwearing metal enclosure features 3-pin screw connectors for DMX and mains input and output plus a backlit 4-button display for easy, intuitive operation while a security lock prevents unauthorized menu access. The Cameo FLOOD 600 IP65 provides 6 modes of DMX control with dimmer and strobe functions, colour temperature correction and master, slave and standalone applications.

The multi-voltage fixture operates on 100 – 240 V AC and comes with an adjustable universal bracket for floor placement and multiple mounting options. Barn doors are available as accessory.

Product type LED PAR Lighting
Type Outdoor
Colour spectrum RGBWA+UV
Number of LEDs 9 x 6
LED type 12W (approx. 50000 operating hours)
Refresh rate 3000 Hz
Dispersion 40 °
DMX input 3-pin special connector, screwable
DMX output 3-pin special connector, screwable
DMX mode 11-channel , 2-channel , 3-channel 1 , 3-channel 2 , 6-channel , 9-channel
DMX Functions colour fade , colour jump , colour macro , master dimmer , RGBWA+UV , strobe
Standalone modes auto programs , colour fade , colour jump , colour macro , master / slave mode , static colour
Controls Enter , mode , Value Down , Value Up
Indicators backlit LCD
Operating voltage 100 V AC - 240 V AC, 50 - 60 Hz
Power consumption 90 W
Power connector 3-pin special connector, screwable
Housing material metal
Cabinet colour Black
Protection class IP 65
Cooling Convection
Illuminance 7500 lx @ 1 m
Dimensions without mounting bracket
Width 180 mm
Height 180 mm
Length 120 mm
Weight 3,2 kg
pdfUser's manual pdfDMX Control Table pdfEco label pdfPhotometric measurements libraryDaslight V3 fixtures libraryFixtures Library grandMA

Cameo THUNDER WASH 100 RGB 3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB

  • Strobe, Blinder and Wash Light all in one
  • 132 RGB SMD LEDs
  • 1 to 30 flashes/sec adjustable
  • DMX, Sound- and manual control
  • Master, Slave and Standalone operation
  • Rugged metal housing with universal mounting bracket
  • Low power consumption
The Thunder Wash 100 RGB is a Strobe, Blinder and Wash Light all in one. It is equipped with 132 RGB 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket. The Thunder Wash 100 RGB comes with 3-pin XLR sockets for DMX input and output, 8 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.
Product type
LED Strobes

Type
Strobe / Blinder / Washer

Colour spectrum
RGB

Number of LEDs
132

LED type
0.2 W

Dispersion
80 °

Refresh rate
1 - 30 Hz

DMX input
XLR 3-pin male

DMX output
XLR 3-pin female

DMX mode
1-channel , 2-channel 1 , 2-channel 2 , 3-channel 1 , 3-channel 2 , 3-channel 3 , 4-channel , 6-channel

DMX Functions
Dimmer , Flash duration , Flash rate

Standalone modes
Dimmer Mode , Flash duration , slave mode , sound control

Controls
mode , Value Down , Value Up

Indicators
LED Display

Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz

Power consumption
30 W

Power connector
IEC power connector male

Housing material
metal

Cabinet colour
Black

Dimensions without mounting bracket


Width
310 mm

Height
70 mm

Depth
70 mm

Weight
1,4 kg

GR0467 GOBOSTORM 575W 

GOBOSTORM is a fully weatherproofed (IP65) outdoor use high power zoom optics gobo projector. Using a 575W metal halide lamp with a high precision optical group, GOBOSTORM can project images with high brightness and clarity. The high power lamp gives the ability to project at long distances or to create enormous impact when used for closer projections. GOBOSTORM has on-board dip-switch panel for digital data assignment and stand alone operation control. These functions can alternatively be operated from an external digital controller for a maximum of 1 channel of DMX. The zoom and focus are manually set and the projection angle range can be extended by the narrow and wide lens options. This gives much flexibility with image size and projection distance. GOBOSTORM is designed for easy installation and programming, together with reliability even in the harshest weather conditions. This is a new opportunity for advertising, logo or image creation, in any outdoor urban environment.

 

 

 

LAMP SOURCE

Metal Halide lamp MSD 575, 575W, 43.000 lm, 6.000 K
Average rated life 3.000 hours, GX9.5 base (ordering code LP0997 - suggested)
Metal Halide lamp MSR 575, 575W, 49.000 lm, 7.200 K
Average rated life 1.000 hours, GX9.5 base (ordering code LP0504 - optional)

OPTICAL GROUP

The optical system utilises an aluminium parabolic reflector to produce a projection angle between 10° and 20° by the manual zoom and focus adjustment

IMAGE

One rotating gobo slot hosts either metal or glass gobos (D size - Ext 53,3 - Int 40 mm)
One dichroic filter can also be used in combination with a metal gobo

DIGITAL CONTROL

On-board dip-switch panel for digital data assignment and stand alone operation control
1 channel of standard DMX 512
Programming software with USB compatible download IP65 box (ordering code AD4118)
Enhanced programming software with ETHERNET compatible download IP65 box (ordering code AD4119)

ELECTRICAL SPECIFICATIONS

Power supply:
200-220 / 230-250V / 50-60Hz / 4.3A @ 230V
Power consumption: 730W
Self resetting fuse protection
Electrical class: I
Meets CE safety standards

HOUSING

Pressure die cast aluminium body, with an adjustable mounting yoke
Scratch resistant polyester grey finish, which protects against UV deterioration and general corrosion
Front tempered glass shock resistant
Convection cooling plus an internal axial fan keep the level of heat within the unit constant and help dissipation through the body
Certified IP65 protection rating
Shock resistance: 0,8J

WEIGHT

Unit = 22.1 Kg
Ballast = 10 Kg

PACKING SIZE

Volume: 0,467 m3
Weight: 38,7 Kg
Size: L76 x W76 x H81 cm
Boxes: 1 cardboard box

 

User\'s manual
DMX Control Table
Eco label
Photometric measurements
Daslight V3 fixtures
Fixture Library grandMA2

Cameo FLAT PRO FLOOD IP65 TRI
Outdoor Flood Light with 60 Watt Tri-Color COB LED in black housing
  • 1 x 60W Tri Color COB LED
  • IP65 rated for outdoor applications
  • Flicker free
  • 120 degrees dispersion for perfect wall-washing effects
  • DMX control plus master, slave and standalone modes
  • Easy to operate via mode, enter, up and down keys with backlit display
  • Menu lock to prevent unauthorized access
  • Compact heavy-duty metal enclosure
  • Universal mounting bracket
  • DMX and mains input and output on screw connectors
  • Barn doors available as accessory

The Cameo FLAT PRO series FLOOD IP65 TRI is a compact outdoor LED flood light with IP65 rating, 120° beam angle and convection cooling. A 60 watt tri-color COB LED generates rich, saturated RGB colors with a 3,000 Hz refresh rate providing flicker free performance. The black heavy-duty metal enclosure features screw connectors for DMX and mains input and output plus a backlit display with mode, enter, up and down keys for easy operation. The Cameo FLOOD IP65 TRI allows for 2-channel, 3-channel 1, 3-channel 2 and 6-channel DMX control as well as master, slave and standalone modes while a setting lock prevents unauthorized menu access. The universal bracket adds a wide variety of mounting options. Barn doors are available as accessory.

Product type LED PAR Lighting
Type Outdoor
Colour spectrum RGB
Number of LEDs 1
LED type 60 W COB TRI LED
Refresh rate 3000 Hz
Dispersion 120 °
DMX input 3-pin special connector, screwable
DMX output 3-pin special connector, screwable
DMX mode 2-channel , 3-channel 1 , 3-channel 2 , 6-channel
DMX Functions colour fade , colour jump , colour macro , master dimmer , RGB , strobe
Standalone modes Auto run , colour fade , colour jump , colour macro , master / slave mode , static colour
Controls Enter , mode , Value Down , Value Up
Indicators backlit LCD
Operating voltage 110 V AC - 240 V AC / 50 – 60 Hz
Power consumption 75 W
Power connector 3-pin special connector, screwable
Housing material metal
Cabinet colour Black
Protection class IP 65
Cooling Convection
Illuminance 830lx @ 1m
Dimensions without mounting bracket
Width 180 mm
Height 180 mm
Length 120 mm
Weight 3,2 kg

Griven GR 456 Kolorado MK3 2500W

Architectural Colour Changer

KOLORADO MK3 2500 utilizes an HMI 2500/GS lamp (Sfa 21 ?12 base) and shares a similar wide angle output and the CYM colour mixing system of its small brother KOLORADO MK3 1800. However it offers, with its newly conceived patented optical system an extremely powerful light output, giving the ability to cover greater areas or distances, and indeed effective use in a higher level of ambient light, than the 1800W version. Like this version, Kolorado MK2 2500 has a uniform colour coverage, creating superb effects.
The detachable ballast unit is separable from the main unit by up to 20m, and this and the relatively resultant relatively compact size of the main unit can greatly facilitate both portable use and fixed installations. Control is the same as the 1800W, with selectable inbuilt speed controllable pre-programmed colour blend sequences, or full control from standard DMX512, in which mode the lamp on/off can be remotely operated. A stand by function reduces power consumption automatically by 33% after black-out have been activated for more than 15 seconds. The aluminium and galvanized steel body, with certificated IP44 weather protection, is coated with black epoxy powder paint for exterior use. A new version of this unit using the 2000-hour MSA 2500W lamp is now available. Existing KOLORADO MK3 2500W

 LAMP SOURCE
 
 
 Type:  HMI, MSA (L/L)
 Wattage (W):  2500
 Base:  SFA 21-12, SPECIAL
 Lamp life (h):  500, 2000 (L/L)
 Lumens:  240.000, 260.000 (L/L)
 
 
 
- COLOURS
 
 
 Color (MIX):  
 
 
- PROJECTION
 
 
 Angle:  74~{!c~} (standard) 34~{!c~}- 93~{!c~} (optional)
 Dimmer:  Mechanical
 Strobe:  2,6 Fps
 
 
- OPERATION
 
 
 DMX channels:  5
 Stand alone:  
 Master / Slave:  
 On Board Control:  
 
 
- HOUSING
 
 
 Weather protection:  IP44
 Cooling:  FV
 
 
- SIZE (mm)
 
 
 Height:  821
 Width:  620
 Depth:  623
 
 
- - WEIGHT (kg)
 
 
 Main fixture:  77,5
 
 
- POWER
 
 
 Input (V):  230-240
 HZ:  50-60
 AMP:  9

Weight19.50 kg3.20 kg1.40 kg32.10 kg3.20 kg77.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 19.50 kg
Weight 3.20 kg
Weight 1.40 kg
Weight 32.10 kg
Weight 3.20 kg
Weight 77.50 kg