Griven AD-3462 EVEREST CYM 900 700W

EVEREST CYM 900 is another of the 2004 newcomers to theexpanding Architectural Dimension range. This unit uses the samehousing as the Colosseo OS CYM 1000, and, due to the greateroutput of the MSD700 lamp, is an even more powerful alternativeto the Colosseo. Standard 7?? optics will produce an ultra narrowbeam for great distances, the only trade off being a less smoothmix of colour changing at closer projection distances, due to themore focused image. This ultra bright, ultra narrow beam ability isprobably unique from an IP 65 rated colour changer and will givelighting designers and specifiers opportunities not previously availableto them. However, the standard front diffusion glass and the manuallyadjustable zoom between 17?? and 24?? make the projector highlysuitable for long distance coverage, as well. Other beam anglescan also be achieved with optional additional filters. Colour sequencesand blends can be selected from a pre-programmed internalcontroller, with multiple unit synchronisation possible, or controlledfrom the IP65 CYM dedicated controller or from any DMX512 controlsystem. A version of the Everest - EVEREST CYM 900 HFT - isavailable fitted with a wireless DMX receiver, for trouble free controlof large or otherwise awkward installations where the running ofDMX signal cable from the control system to the projector could beproblematic. This system requires the use of Griven?fs wireless DMXtransmitter. See dedicated section for more information.

LAMP
700 W, 50.500 lm, 6.000 ?°K
Discharge lamp MSD 700
Average rated life 3.000 hours
G 22 base
Ordering code LP0700

STANDARDS
Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I
Shock resistance: 0,8J.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.

OPTICAL GROUP
The optical system utilises an aluminium parabolic reflector
to produce a 7?° hard edge beam. A soft edge beam between 17?° and 24?° is available by the intasllation of an additional diffusion glass included and a manual zoom adjustment.
Additional filters are available for alternative beam adjustments.

COLOUR CHANGER SYSTEM
CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.

BLACK-OUT
Variable speed black out effect. Linear 0-100% dimmer function. 2,6 FpS strobe maximum speed.

LAMP
Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked five channels of DMX per projector. Remote lamp on/off function.

COOLING
An internal axial fan 120x120 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.

POWER SUPPLY
230 V, 50 Hz, 5,8 Amp

Griven AD-3436 Dolomite CYM 600 575W

STELVIO CYM 300, another newcomer to the architectural range, uses a new lamp, the MSD 250, which due to its short arc produces even more light output than from the HQI-TS used in the Vesuvio OS CYM 250. This projector is equipped with an optical system that produces a long throw beam of 33?°. Alternative beam angles can be achieved by optional expansion filters. The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The colour mixing system with cyan, yellow and magenta dichroic filters creates virtually unlimited colour hues, coupled with smooth blends between colour changes. Colour sequences can be selected from a pre-programmed internal controller, with multiple unit synchronisation possible, or controlled from the IP65 CYM dedicated controller or from any DMX512 control system. Remote lamp ON/OFF control and dimmer/strobe/black out functions now available.
A version of the Stelvio - STELVIO CYM 300 HFT- is available fitted with a wireless DMX receiver, for trouble free control of large or otherwise awkward installations where the running of DMX signal cable from the control system to the projector could be problematic. This system requires the use of Griven???s wireless DMX transmitter. See dedicated section for more information.

LAMP
250W, 18.000 lm, 6.700?° K
Discharge lamp MSD 250
Average rated life 3.000 hours
GY 9,5 base.
Ordering code LP0205
Available on request: MSA 300 lamp (250W), 4000/6000 hours, 16.000 lm, 6000?° K

STANDARDS
Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I
Shock resistance: 0,8J.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.

OPTICAL GROUP
The optical system utilises an aluminium ellipsoidal reflector and produces a soft edge beam of approximately 33?°. Additional filters are available for alternative beam adjustments.

COLOUR CHANGER SYSTEM
CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.

BLACK-OUT
Variable speed black out effect. Linear 0-100% dimmer function. 2,6 FpS strobe maximum speed.

CONTROL
Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX 512 controller can be linked five channels of DMX per projector. Remote lamp on/off function.

COOLING
An internal axial fan 80x80 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.

POWER SUPPLY
230V, 50Hz, 1,7 Amp

DMX Control Table

Eco label

Photometric measurements

Daslight V3 fixtures

Fixtures Library grandMA

Cameo THUNDER WASH 100 RGB 3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB

Griven GR 402 Kolorjet 4000W

Architectural Colour Changer

KOLORJET is an immensely powerful outdoor colour changer with weatherproofing to a certified IP44 rating. This far advanced unit uses a Xenon 4000W lamp for an extraordinary light output which should fulfil the most demanding applications in the architectural lighting field.
The power of the lamp is enhanced by the performance of the nickel rhodium plated reflector and the CYM colour mixing system creates an almost unlimited variety of hues. These features make KOLORJET ideal for such applications as concert touring, skyscraper highlighting and movie sets, where the quality and power of a flicker free XENON lamp are required.
An electronic zoom varies the beam size, yet another feature for a unit already packed with technology and with a wide range of capabilities, and designed for absolute reliability.
On board or remote DMX512 control gives instant access to all functions, including colour mixing, frost soft edge effect, black out, strobe and stand by (reducing power and lamp consumption). Pre-programmed automatic colour sequences are also selectable and the master/slave option allows multiple units to be operated in synchrony.

Technical features 
 
- LAMP SOURCE
 
 
 Type:  XENON
 Wattage (W):  4000
 Base:  SFAX 30-9,5 SFA 30-8
 Lamp life (h):  1.000
 Lumens:  155.000
 
 
 
- COLOURS
 
 
 Color (MIX):  
 
 
- PROJECTION
 
 
 Angle:  1?°-16?°
 Zoom:  Motorised
 Dimmer:  Mechanical
 Strobe:  2 Fps
 Filters:  Frost
 
 
- OPERATION
 
 
 DMX channels:  7
 Stand alone:  
 Master / Slave:  
 On Board Control:  
 
 
- HOUSING
 
 
 Weather protection:  IP44
 Cooling:  FV
 
 
- SIZE (mm)
 
 
 Height:  1375
 Width:  715
 Depth:  680
 
 
- - WEIGHT (kg)
 
 
 Main fixture:  60 (143 ballast incl.)
 Ballast set:  83
 
 
- POWER
 
 
 Input (V):  220-380 Three-fase +N +G
 HZ:  50-60
 AMP:  9 (380V) - 17 (220V)

GR0467 GOBOSTORM 575W 

GOBOSTORM is a fully weatherproofed (IP65) outdoor use high power zoom optics gobo projector. Using a 575W metal halide lamp with a high precision optical group, GOBOSTORM can project images with high brightness and clarity. The high power lamp gives the ability to project at long distances or to create enormous impact when used for closer projections. GOBOSTORM has on-board dip-switch panel for digital data assignment and stand alone operation control. These functions can alternatively be operated from an external digital controller for a maximum of 1 channel of DMX. The zoom and focus are manually set and the projection angle range can be extended by the narrow and wide lens options. This gives much flexibility with image size and projection distance. GOBOSTORM is designed for easy installation and programming, together with reliability even in the harshest weather conditions. This is a new opportunity for advertising, logo or image creation, in any outdoor urban environment.

LAMP SOURCE

OPTICAL GROUP

IMAGE

DIGITAL CONTROL

ELECTRICAL SPECIFICATIONS

HOUSING

WEIGHT

PACKING SIZE