Griven AD-3462 EVEREST CYM 900 700W

3,272.86 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Griven AD-3462 EVEREST CYM 900 700W EVEREST CYM 900 is another of the 2004 newcomers to theexpanding Architectural Dimension range. This unit uses the samehousing as the Colosseo OS CYM 1000, and, due to the greateroutput of the MSD700 lamp, is an even more powerful alternativeto the Colosseo. Standard 7?? optics will produce an ultra […]

 

Read more

Griven AD-3462 EVEREST CYM 900 700W

EVEREST CYM 900 is another of the 2004 newcomers to theexpanding Architectural Dimension range. This unit uses the samehousing as the Colosseo OS CYM 1000, and, due to the greateroutput of the MSD700 lamp, is an even more powerful alternativeto the Colosseo. Standard 7?? optics will produce an ultra narrowbeam for great distances, the only trade off being a less smoothmix of colour changing at closer projection distances, due to themore focused image. This ultra bright, ultra narrow beam ability isprobably unique from an IP 65 rated colour changer and will givelighting designers and specifiers opportunities not previously availableto them. However, the standard front diffusion glass and the manuallyadjustable zoom between 17?? and 24?? make the projector highlysuitable for long distance coverage, as well. Other beam anglescan also be achieved with optional additional filters. Colour sequencesand blends can be selected from a pre-programmed internalcontroller, with multiple unit synchronisation possible, or controlledfrom the IP65 CYM dedicated controller or from any DMX512 controlsystem. A version of the Everest – EVEREST CYM 900 HFT – isavailable fitted with a wireless DMX receiver, for trouble free controlof large or otherwise awkward installations where the running ofDMX signal cable from the control system to the projector could beproblematic. This system requires the use of Griven?fs wireless DMXtransmitter. See dedicated section for more information.

LAMP
700 W, 50.500 lm, 6.000 ?°K
Discharge lamp MSD 700
Average rated life 3.000 hours
G 22 base
Ordering code LP0700

STANDARDS
Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I
Shock resistance: 0,8J.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.

OPTICAL GROUP
The optical system utilises an aluminium parabolic reflector
to produce a 7?° hard edge beam. A soft edge beam between 17?° and 24?° is available by the intasllation of an additional diffusion glass included and a manual zoom adjustment.
Additional filters are available for alternative beam adjustments.

COLOUR CHANGER SYSTEM
CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.

BLACK-OUT
Variable speed black out effect. Linear 0-100% dimmer function. 2,6 FpS strobe maximum speed.

LAMP
Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked five channels of DMX per projector. Remote lamp on/off function.

COOLING
An internal axial fan 120×120 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.

POWER SUPPLY
230 V, 50 Hz, 5,8 Amp

Weight 27.00 kg

Reviews

There are no reviews yet.

Be the first to review “Griven AD-3462 EVEREST CYM 900 700W”

Your email address will not be published. Required fields are marked *

Quick Comparison

Griven AD-3462 EVEREST CYM 900 700W removeARTLIGHT FL100CWIP66 LED Flood Light 100W IP66 9000Lm Day Light removeGriven AD-3252 Colosseo OS CYM 1000 1000W removeGriven AD-3233 Pantheon OS CYM 400 400W removeGRIVEN GR 467 Gobostorm Projector SECOND HAND removeCameo FLAT PRO FLOOD 600 IP65 Outdoor Flood Light with 9x12W RGBWA+UV 6-In-1 LEDs remove
NameGriven AD-3462 EVEREST CYM 900 700W removeARTLIGHT FL100CWIP66 LED Flood Light 100W IP66 9000Lm Day Light removeGriven AD-3252 Colosseo OS CYM 1000 1000W removeGriven AD-3233 Pantheon OS CYM 400 400W removeGRIVEN GR 467 Gobostorm Projector SECOND HAND removeCameo FLAT PRO FLOOD 600 IP65 Outdoor Flood Light with 9x12W RGBWA+UV 6-In-1 LEDs remove
ImageLed IP66 9000lumens flood light
SKUEVERESTCYM90FL100CWIP66COLOSSEOOSCYPANTHEONOSCYGR467CLFLOOD600IP65
Rating
Price 3,272.86 incl. GR VAT 16.12 incl. GR VAT 3,386.07 incl. GR VAT 2,624.46 incl. GR VAT 1,178.00 incl. GR VAT 390.60 incl. GR VAT
Stock

Available on backorder

In stock (can be backordered)

Available on backorder

Available on backorder

Only 1 left in stock

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderIn stock (can be backordered)Available on backorderAvailable on backorderOnly 1 left in stockOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Griven AD-3462 EVEREST CYM 900 700W

EVEREST CYM 900 is another of the 2004 newcomers to theexpanding Architectural Dimension range. This unit uses the samehousing as the Colosseo OS CYM 1000, and, due to the greateroutput of the MSD700 lamp, is an even more powerful alternativeto the Colosseo. Standard 7?? optics will produce an ultra narrowbeam for great distances, the only trade off being a less smoothmix of colour changing at closer projection distances, due to themore focused image. This ultra bright, ultra narrow beam ability isprobably unique from an IP 65 rated colour changer and will givelighting designers and specifiers opportunities not previously availableto them. However, the standard front diffusion glass and the manuallyadjustable zoom between 17?? and 24?? make the projector highlysuitable for long distance coverage, as well. Other beam anglescan also be achieved with optional additional filters. Colour sequencesand blends can be selected from a pre-programmed internalcontroller, with multiple unit synchronisation possible, or controlledfrom the IP65 CYM dedicated controller or from any DMX512 controlsystem. A version of the Everest - EVEREST CYM 900 HFT - isavailable fitted with a wireless DMX receiver, for trouble free controlof large or otherwise awkward installations where the running ofDMX signal cable from the control system to the projector could beproblematic. This system requires the use of Griven?fs wireless DMXtransmitter. See dedicated section for more information.

LAMP
700 W, 50.500 lm, 6.000 ?°K
Discharge lamp MSD 700
Average rated life 3.000 hours
G 22 base
Ordering code LP0700

STANDARDS
Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I
Shock resistance: 0,8J.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.

OPTICAL GROUP
The optical system utilises an aluminium parabolic reflector
to produce a 7?° hard edge beam. A soft edge beam between 17?° and 24?° is available by the intasllation of an additional diffusion glass included and a manual zoom adjustment.
Additional filters are available for alternative beam adjustments.

COLOUR CHANGER SYSTEM
CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.

BLACK-OUT
Variable speed black out effect. Linear 0-100% dimmer function. 2,6 FpS strobe maximum speed.

LAMP
Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked five channels of DMX per projector. Remote lamp on/off function.

COOLING
An internal axial fan 120x120 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.

POWER SUPPLY
230 V, 50 Hz, 5,8 Amp

LED headlight with strong white lighting.
It can be mounted on a flat surface, on the floor or wall-mounted.
Exterior lighting for commercial and industrial buildings, parks, sports fields, garage facilities, parking, and advertising structures. Low operating temperature, lack of consumables, much lower energy consumption, durability and weather resistance, environmentally friendly products. External, watertight.Photos may vary little.
The high degree of IP66 tightness makes these LED headlights suitable for outdoor use.Advantage is the long service life of up to 50,000 hours, compared to a conventional lamp that has an operating duration of about 2,000 hours.
Ideal for entrances, garages, terraces, cottages, shop windows, warehouses, etc.
Features:
  • Power: 100W
  • Voltage: AC85 – 265V
  • Lumens: 9000Lm
  • Lighting color: White
  • Color temperature: 6500K
  • Lighting Angle: 120º
  • Lifespan: ≥50000 hours
  • Waterproofing level: IP66
  • Dimensions: 23 x 4 x 26cm
  • Color: Black

Griven AD-3252 Colosseo OS CYM 1000 1000W

The high light output afforded by the HQI 1000W lamp means that COLOSSEO OS CYM 1000 can be used to light up large buildings, giving even colour coverage over a large area. The projector can be mounted in any orientation, which means, for example, that a tall building could be lit from top and bottom, or, using two pairs of units, from the middle of both sides facing towards the opposite corners. Alternative beam angles can be achieved by optional expansion filters. The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The colour mixing system with cyan, yellow, and magenta dichroic filters creates virtually unlimited colour hues, coupled with smooth blends between colour changes. Colour sequences can be selected from a pre-programmed internal controller with multiple unit synchronization possible, or controlled from the IP65 CYM dedicated controller, or from any DMX 512 control system. A version of the Colosseo - COLOSSEO OS CYM 1000 HFT - is avaialble fitted with a wireless DMX receiver for trouble free control of large or otherwise awkward installations where the running of DMX signal cable from the control system to the projector could be problematic. This system requires the use of Griven's wireless DMX transmitter. See dedicated section for more information.


LAMP
1000W, 90.000 lm, 5.900?°K
Metal halide lamp HQI-TS/D/S 1000
Average rated life 6.000 hours
Special base.
Ordering code LP1008

STANDARDS
Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I .
Shock resistance: 0,8J.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.


OPTICAL GROUP
The optical system utilises an aluminium parabolic reflector and produces a soft edge beam of approximately 35?°. Additional filters are available for alternative beam adjustments.

COLOUR CHANGER SYSTEM
CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.

BLACK-OUT
A simulation of a black-out effect is achieved by the simultaneous closing of all dichroic filters, which is controlled from an external DMX controller.

CONTROL
Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX 512 controller can be linked - three channels of DMX per projector.

COOLING
An internal axial fan 120x120 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.

POWER SUPPLY
230V, 50Hz, 1,7 Amp.

Griven AD-3233 Pantheon OS CYM 400 400W

PANTHEON OS CYM 400, which is fitted with a metal halide HQI-TS 400W 6000 hours lamp, is equipped with an optical system that produces a long throw beam of approximately 46? Alternative beam angles can be achieved by optional expansion filters.
The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The colour mixing system with cyan, yellow and magenta dichroic filters creates virtually unlimited colour hues, coupled with smooth blends between colour changes. Colour sequences can be selected from a pre-programmed internal controller, with multiple unit synchronisation possible, or controlled from the IP65 CYM dedicated controller, or from any DMX512 control system.
A version of the Pantheon - PANTHEON OS CYM 400 HFT ?¨C is available fitted
with a wireless DMX receiver, for trouble free control of large or otherwise difficult
installations where the running of DMX signal cable from the control system to
the projector could be problematic. This system requires the use of Griven's
wireless DMX transmitter. See dedicated section for more information.

LAMP
400 W, 28.000 lm, 5.600?°K
Metal halide lamp HQI-TS 400/D
Average rated life 6.000 hours
Special base
Ordering code LP1006

STANDARDS
Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion.
Front tempered glass shock resistant.
Certified IP65 weather protection
Electrical class: I
Shock resistance: 0,8J.
Maximum ambient temperature: 35?°C.
Maximum operating temperature: 100?°C.
Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.

OPTICAL GROUP
The optical system utilises an aluminium ellipsoidal reflector and produces a soft edge beam of approximately 35?°. Additional filters are available for alternative beam adjustments.

COLOUR CHANGER SYSTEM
CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.

BLACK-OUT
A simulation of black-out effect is achieved by the simultaneous closing of all dichroic filters, which is controlled from an external DMX controller.

CONTROL
Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked - three channels of DMX per projector.

COOLING
An internal axial fan 80x80 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.

POWER SUPPLY
230 V, 50 Hz, 2,5 Amp

GR0467 GOBOSTORM 575W 

GOBOSTORM is a fully weatherproofed (IP65) outdoor use high power zoom optics gobo projector. Using a 575W metal halide lamp with a high precision optical group, GOBOSTORM can project images with high brightness and clarity. The high power lamp gives the ability to project at long distances or to create enormous impact when used for closer projections. GOBOSTORM has on-board dip-switch panel for digital data assignment and stand alone operation control. These functions can alternatively be operated from an external digital controller for a maximum of 1 channel of DMX. The zoom and focus are manually set and the projection angle range can be extended by the narrow and wide lens options. This gives much flexibility with image size and projection distance. GOBOSTORM is designed for easy installation and programming, together with reliability even in the harshest weather conditions. This is a new opportunity for advertising, logo or image creation, in any outdoor urban environment.

 

 

 

LAMP SOURCE

Metal Halide lamp MSD 575, 575W, 43.000 lm, 6.000 K
Average rated life 3.000 hours, GX9.5 base (ordering code LP0997 - suggested)
Metal Halide lamp MSR 575, 575W, 49.000 lm, 7.200 K
Average rated life 1.000 hours, GX9.5 base (ordering code LP0504 - optional)

OPTICAL GROUP

The optical system utilises an aluminium parabolic reflector to produce a projection angle between 10° and 20° by the manual zoom and focus adjustment

IMAGE

One rotating gobo slot hosts either metal or glass gobos (D size - Ext 53,3 - Int 40 mm)
One dichroic filter can also be used in combination with a metal gobo

DIGITAL CONTROL

On-board dip-switch panel for digital data assignment and stand alone operation control
1 channel of standard DMX 512
Programming software with USB compatible download IP65 box (ordering code AD4118)
Enhanced programming software with ETHERNET compatible download IP65 box (ordering code AD4119)

ELECTRICAL SPECIFICATIONS

Power supply:
200-220 / 230-250V / 50-60Hz / 4.3A @ 230V
Power consumption: 730W
Self resetting fuse protection
Electrical class: I
Meets CE safety standards

HOUSING

Pressure die cast aluminium body, with an adjustable mounting yoke
Scratch resistant polyester grey finish, which protects against UV deterioration and general corrosion
Front tempered glass shock resistant
Convection cooling plus an internal axial fan keep the level of heat within the unit constant and help dissipation through the body
Certified IP65 protection rating
Shock resistance: 0,8J

WEIGHT

Unit = 22.1 Kg
Ballast = 10 Kg

PACKING SIZE

Volume: 0,467 m3
Weight: 38,7 Kg
Size: L76 x W76 x H81 cm
Boxes: 1 cardboard box

 

User\'s manual
Eco label
Photometric measurements
Daslight V3 fixtures
Fixture Library grandMA2

Cameo FLAT PRO FLOOD 600 IP65
Outdoor Flood Light with 9x12W RGBWA+UV 6-In-1 LEDs
  • Highly flexible IP65 outdoor flood light
  • Ultra flexible colour mixing with rich solid, warm pastel and UV colours
  • Flicker free
  • 6 modes of DMX control plus master, slave and standalone applications
  • 4-button display for intuitive operation
  • Security lock against unauthorized menu access
  • Durable compact size metal enclosure
  • Screw connectors for DMX and mains input and output
  • Incl. universal bracket

The Cameo FLAT PRO series FLOOD 600 IP65 is a compact RDM enabled outdoor flood light equipped with nine 12 watt 6-in-1 LEDs generating rich RGBWA colours, soft pastel hues and intense UV effects. The IP65 rated fixture sports convection cooling, a 40° beam angle and 3,000 Hz refresh rate for flicker free performance.

The hardwearing metal enclosure features 3-pin screw connectors for DMX and mains input and output plus a backlit 4-button display for easy, intuitive operation while a security lock prevents unauthorized menu access. The Cameo FLOOD 600 IP65 provides 6 modes of DMX control with dimmer and strobe functions, colour temperature correction and master, slave and standalone applications.

The multi-voltage fixture operates on 100 – 240 V AC and comes with an adjustable universal bracket for floor placement and multiple mounting options. Barn doors are available as accessory.

Product type LED PAR Lighting
Type Outdoor
Colour spectrum RGBWA+UV
Number of LEDs 9 x 6
LED type 12W (approx. 50000 operating hours)
Refresh rate 3000 Hz
Dispersion 40 °
DMX input 3-pin special connector, screwable
DMX output 3-pin special connector, screwable
DMX mode 11-channel , 2-channel , 3-channel 1 , 3-channel 2 , 6-channel , 9-channel
DMX Functions colour fade , colour jump , colour macro , master dimmer , RGBWA+UV , strobe
Standalone modes auto programs , colour fade , colour jump , colour macro , master / slave mode , static colour
Controls Enter , mode , Value Down , Value Up
Indicators backlit LCD
Operating voltage 100 V AC - 240 V AC, 50 - 60 Hz
Power consumption 90 W
Power connector 3-pin special connector, screwable
Housing material metal
Cabinet colour Black
Protection class IP 65
Cooling Convection
Illuminance 7500 lx @ 1 m
Dimensions without mounting bracket
Width 180 mm
Height 180 mm
Length 120 mm
Weight 3,2 kg
Weight27.00 kg2 kg22.50 kg19.50 kg32.10 kg3.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 27.00 kg
Weight 2 kg
Weight 22.50 kg
Weight 19.50 kg
Weight 32.10 kg
Weight 3.20 kg