CAE GROUPE S2CEB MPAI 8 Multi cable 8 pair high flexibility 8 x 2 x 0,22 mm²

A P P L I C A T I O N
Analogue audio
Any analogue audio transmissions as well in fixed installations as on stage
or broadcast
These highly flexible multi-pairs are destined to mobile applications
P R O D U C T A D V A N T A G E S
High flexibility
Transmission on important lengths due to 0,22 mm2
Facility of wiring thanks to conductors cross section colored
and numbered pairs
T E C H N I C A L D A T A
NO. OF CONDUCTORS: No. x 2 x 0,22 mm2 Bare copper
COMPOSITION: 28 x 0,10 mm
CONDUCTOR INSULATION: Polyolefin
SHIELDING BY PAIR: Bare copper spiral
COLOR OF PAIR: See board
JACKET: Black PVC
PACKAGING: Per m
SUITABLE PLUG: XLR, jack, cinch

PRICE PER METER

A P P L I C A T I O N
Analogue audio
Fixed installations
Audio transmissions in noisy environment
Wiring in professional sound studios
P R O D U C T A D V A N T A G E S
Very good protection against electromagnetique interferences
thanks to individually shielded pairs and overall shield
T E C H N I C A L D A T A
NO. OF CONDUCTORS: No. x 2 x 0,22 mm2 Tinned copper
CONDUCTOR INSULATION: PE
SHIELDING BY PAIR: Aluminium polyester foil + drain wire
COLOR OF CONDUCTEUR: White / blue
COLOR OF PAIR: By number
OVERALLSHIELD: Aluminium polyester foil + drain wire
JACKET: Black PVC
PACKAGING: Per m
SUITABLE PLUG: XLR, jacks

PRICE PER METER

DAP-Audio PSC-211 Power/Signal Cable, price per m Specifications

500M on spool price p/m
Conductor drains Ø mm: OFC 20 x 0,10 (NF) & 3 x 1,5 (power)
Conductor insulation: PE red+black & PVC black (power)
Conductor insulation Ø: 1,3 mm (NF)
Filler material: paper
1st shield: twisted copper NF 96 x 0,10
2nd shield: -
Outer isolation: PVC 11mm, matte blue
Conductor resistance: 80 Ohm/Km
Shield resistance: 30 Ohm/Km
Capacity Inner conductor: 60 pF/m
Cap. Inner conduct. Shield/Inner conduct.: 78 pF/m
Working temperature: -20~60 °C (min./max.)
Working Voltage overflash: 30V
Nom Impedance: 110 Ohm

24 AWG stranded (7x32) TC conductor, polyolefin insulation, individually shielded Beldfoil?
(100% coverage) numbered/color-coded PVC jackets, jackets and shields bonded to strip
simultaneously, overall Beldfoil shield and 24 AWG TC drain wire.  
 
PHYSICAL CHARACTERISTICS : 

CONDUCTOR :
Number of Pairs: 16 
Total Number of Conductors: 32 
AWG: 24 
Stranding: 7x32 
Conductor Diameter: .024 in. 
Conductor Material: TC - Tinned Copper 
   
INSULATION :
Insulation Material: PO - Polyolefin 
Nom. Insulation Wall Thickness: .008 in. 
Insulation Diameter: .040 in. 
Lay Length: 1.75 in. 
Twists/ft.: 6.85 
Pair Color Code Chart: Red and Black 
   
INNER SHIELD :
Inner Shield Material Trade Name: Beldfoil? 
Inner Shield Type: Tape 
Inner Shield Material: Aluminum Foil-Polyester Tape 
Inner Shield % Coverage: 100 % 
Inner Shield Drain Wire AWG: 24 
Inner Shield Drain Wire Stranding: 7x32 
Inner Shield Drain Wire Conductor Material: TC - Tinned Copper 
   
INNER JACKET :
Inner Jacket Material: PVC - Polyvinyl Chloride 
Inner Jacket Nominal Wall Thickness: .014 in. 
Inner Jacket Diameter: .111 in. 
Inner Jacket Color Code Chart: 
 
Number  Color 
1  Brown
2  Red
3  Orange
4  Yellow
5  Green
6  Blue
7  Purple
8  Gray
9  White
Number  Color 
10  Black
11  Tan
12  Pink
13  Gray/Brown
14  Gray/Red
15  Gray/Orange
16  Gray/Yellow
  
OUTER SHIELD :
Outer Shield Material Trade Name: Beldfoil? 
Outer Shield Type: Tape 
Outer Shield Material: Aluminum Foil-Polyester Tape 
Outer Shield %Coverage: 100 % 
 
OUTER SHIELD DRAIN WIRE :
Outer Shield Drain Wire AWG: 18 
Outer Shield Drain Wire Stranding: 7x26 
Outer Shield Drain Wire Conductor Material: TC - Tinned Copper 
   
OUTER JACKET :
Outer Jacket Material: PVC - Polyvinyl Chloride 
Outer Jacket Nominal Wall Thickness: .056 in. 
Outer Jacket Ripcord: Yes 
   
OVERALL NOMINAL DIAMETER :
Overall Nominal Diameter: .628 in. 
MECHANICAL CHARACTERISTICS : 
 
Operating Temperature Range: -35°C To +75°C 
Bulk Cable Weight: 177.3 lbs/1000 ft. 
Max. Recommended Pulling Tension: 286.4 lbs. 
Min. Bend Radius (Install): 6.5 in.
 
APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE : 
 
APPLICABLE STANDARDS :
NEC/(UL) Specification: CM 
CEC/C(UL) Specification: CM 
EU CE Mark (Y/N): Yes 
EU RoHS Compliant (Y/N): Yes 
EU RoHS Compliance Date (mm/dd/yyyy):: 01/01/2004 
   
PLENUM/NON-PLENUM :
Plenum (Y/N): N 
ELECTRICAL CHARACTERISTICS : 
 
Nom. Characteristic Impedance: 50 Ω 
Nom. Inductance: .18 ?H/ft 
Nom. Capacitance Conductor to Conductor @ 1 KHz: 31 pF/ft 
Nom. Cap. Cond. to Other Cond. & Shield @ 1 KHz: 58 pF/ft 
Nominal Velocity of Propagation: 66 % 
Nom. Conductor DC Resistance @ 20 Deg. C: 23.3 Ω/1000 ft 
Ind. Pair Nominal Shield DC Resistance @ 20 Deg. C: 15.9 Ω/1000 ft 
Max. Operating Voltage - UL: 300 V RMS 
Max. Recommended Current: 1.05 Amps per conductor @ 25°C 

REF : CC KX6-375P2

Quality Cable
PRICE PER METER

High Quality AUDIO(or DATA)  – VIDEO – POWER CABLE MADE IN FRANCE

Composite cable: 1 coaxial cable 75 Ω (KX6) + 2 shielded data pairs 0.34 mm² + 3G0.75 mm² feeders. Black PVC outer sheath.

Construction

COAXIAL CABLE:
- INNER CONDUCTOR: stranded bare copper (7 x 0.20 mm nom.)
- DIELECTRIC: Foam PE (Ø = 3.70 mm nom.)
- SHIELD: copper braid (Coverage > 69%)
- SHEATH: green or black PVC Ø = 6.15 mm nom.

DATA PAIRS:
- CORE: bare copper 0.34 mm²
- INSULATION: PE - Ø = 1.15 mm nom.
- COLOUR: blue and white
- SHIELD: tinned copper drain wire + Al/PES tape.
- SHEATH: blue PVC - Ø = 3.0 mm

POWER CABLE:
- CORE: flexible stranded bare copper S = 0.75 mm².
- INSULATION: PVC- Ø = 2.1 mm nom.
- COLOUR: black – red – green/yellow
- SHEATH: grey PVC - Øext = 6.10 mm nom.

GENERAL ASSEMBLY: {1 coaxial cable 75 Ω + 2 pairs 0.34 mm² + 1 cable 3G0.75 mm²} + synthetic fillers under a PES tape + rip cord.
MARKING: CC KX6-375P2 + Batch number

Electrical properties
COAXIAL CABLE:
Inner conductor electrical resistance: Outer conductor electrical resistance: Impedance @ 200 MHz: 75 ± 3 Ω.
Capacitance: 67 pF/m nom.
Attenuation at 20°C: Velocity of propagation: 66 %

DATA PAIRS:
Operating voltage: 100 V.
Electrical resistance at 20°C: Test voltage (1 min. / 50 Hz): 1500 V
Mutual capacitance: 125 pF/m nom.

POWER CABLE:
Operating voltage: 230 V
Test voltage: 2000 V
Electrical resistance at 20°C: Insulation resistance: > 100 MΩ.km

Working temperature: - 20°C Æ +70 °C

Acc. to the RoHS standard

Fire behaviour:
C2 acc. to IEC 60332-1 / NFC32070