Content |
Audio Connectivity Features | Analog Audio Input (Rear) | 5 | Phono Input | 1 | FM Tuner Features | Frequency Range MHz | 87.5 MHz | Usable Sensitivity (IHF) | 1.3 μV/13.2 dBf | Signal-to-Noise Ratio (Mono/Stereo) | 70 dB/68 dB | Distortion (Mono/Stereo) | 0.2%/0.3% | Stereo Separation @ 1kHz | 40 dB | Selectivity ±400kHz | 70 dB | AM Tuner Specifications | Frequency Range kHz | 520 kHz | Signal-to-Noise Ratio | 38 dB | Usable Sensitivity (Loop) | 500 μV | Selectivity | (±10 kHz): 30 dB | Distortion | (1 kHz, 50% mod): 1.0% | General Specifications | Power Requirement | 120V AC, 60Hz (USA); 220V – 240V AC, 50Hz/60Hz (EU) | Power Consumption (full power/idle) | 310W maximum, | Dimensions (H x W x D – Metric/English) | 121 mm x 440 mm x 300 mm | |
Τi 60 tube
Integrated tube amp.Four line inputs.
2X12AU7, 4x EL34, 1x12AX7
35 Wrms per chan.4-8 ohm.
Class AB push-pull
Remote control included.
Technical specification
|
|
|
Integrated Amplifier
|
Frequency response:
|
10 Hz - 50 kHz (± 0.5 dB)
|
Total harmonic distortion (THD):
|
1 % (1 kHz)
|
Signal-to-noise ratio:
|
92 dB
|
Input Impedance:
|
100 kOhm
|
|
|
Vacuum tube:
|
4x KT88/EL34, 2x 12AU7, 2x 12AX7, 2x 6SN7
|
Dimensions W x H x D:
|
440 x 220 x 390 mm
|
Weight:
|
28 kg
|
Accessories:
|
Remote Control
|
Input Terminals:
|
Tape, CD, AUX, Tuner
|
Output terminals:
|
Tape out
|
Circiut:
|
Class A/B P.P.
|
Colour:
|
Chassis chrome, transformer black
|
Colour front:
|
black, silver
|
Sensitivity
|
590 mV
|
Output Impedance:
|
4 Ohm, 8 Ohm
|
Power Output:
|
2 x 70 Watt @ 1 % THD
|
Consumption:
|
max. 380 Watt
|
Highlights
|
switchable reduction of feedback
|
|
Designed for excellent sound quality, with a beautiful appearance.
An integrated amplifier with the advantage of digital input.
ToP-ART (Total Purity Audio Reproduction Technology) and high quality parts
- I/O (input to output) Direct Symmetrical Design
- ART (Anti-Resolution and Tough) Base
- Custom-made power transformer / 6,800uF block capacitors / Aluminum-extruded heat sinks
95W x 2 (max), 60W x 2 (RMS) high power output
Pure Direct Mode for Greater Sound Purity
Continuous Variable Loudness Control
Digital audio inputs for TV or Blu-ray Player
Connection for YBA-11 Bluetooth Wireless Adapter
Simple yet sophisticated design (aluminium front panel and knobs)
Auto Power Standby | High sound quality and sophisticated design based on Yamahaʼs rich experience and high-end model concepts. A HiFi Amplifi er for enjoying excellent sound.
- Yamaha high sound quality, created by rich experience and tradition, and high technological expertise
- Pure Direct Mode for greater sound purity
- Simple and sophisticated design
- Phono MM terminal for vinyl playback
- Screw-type speaker terminals
- Speaker selector and speaker terminals for two systems
- Simple design remote control
- Head phone terminal
|
Toroidal Transformer
We mount the premium toroidal transformer centrally, to reduce flux or magnetic disturbance from the volume pot.
Dynamic Thermal Tracking transistors
The output power transistors used by the CXA60 are not your usual common or garden offerings. They come with an integrated Dynamic Thermal Tracking System. So what does this mean? Normally a Power Output transistor utilises a thermo-coupler attached directly to the heat sink of the amp; this informs the system so that it can re-bias when key temperatures are reached. However, using Integrated Dynamic Thermal tracking provides a far more accurate reading of the real temperature of a transistor, and relays it faster too because itʼs not a delayed heating effect. This enables us to bias the amplifier more accurately and in almost real time. Which means your CXA60 is always running at optimum performance.
Musical Subwoofer output
If you want to use a subwoofer as part of your speaker complement, the CXA60 doesnʼt penalise you for it. Because we want to ensure thereʼs no unnecessary high frequency noise affecting the subwoofer, weʼve put the output filter at 3kHz. This is high enough to prevent any phase shift associated with the low pass filter affecting what happens below 200Hz. The result is a phase linear subwoofer output signal which is clean and musical.
Fully balanced signal management
Thereʼs some revolutionary signal management happening beneath the lid of the CXA60. For the first time, our engineers decided to go fully balanced rather than single-ended all the way through. As a consequence, any noise that that might be picked up in the audio signal while routing through the amplifier is cancelled before itʼs output.
Reinventing the signal path
The CX range represents a step change in the way our engineers have approached signal path design, and the result is one of our most musical and entertaining amplifiers yet. Previously, we went to almost surgical lengths to minimise distortion in order to get the best results. This invariably meant 46 components sat in the signal path. For the CX Series, we wanted to dramatically reduce that component count. The CXA60 now has only 24 components in the signal path. The big difference is that there are now 500 support components as well.
Their job is to guarantee those 24 key components are absolutely optimal all the time, regardless of mains fluctuations and other influences. This has made a big difference when it comes to tuning. Previously, tweaking one of the 46 components only made a small difference and it was sometimes difficult to quantify exactly what difference any change made. With the CX series, those 24 components have now actually become quite critical. Changing just one affects the character of the amplifier. We can hear very clearly what each of those components is doing.
This revision has fundamentally changed the character of the amplifier. Listening to a CX series amplifier is fun, engaging and exciting.
Bespoke Bluetooth
If you want to use your CXA60 with a Bluetooth source, we offer an optional BT100 audio receiver. To ensure that this does not interfere with other components in the amplifier, itʼs isolated internally on the digital input board. From the ground up, this is an audiophile Bluetooth device. All the coding for the BT100 is done in-house. We even include an extension cable which enables you get the best Bluetooth range.
Embracing classic design
Sometimes thereʼs a good reason to keep things uncomplicated. The CXA60 features a high-quality damped metal chassis, designed to ensure that nothing rattles or interferes with the electronics. Weʼve also kept volume control simple. The CXA60 uses a logarithmic ALPS pot. And when it comes to switching inputs, the CXA60 uses relay switching with silver plated contacts. This classic approach is still the best way to move signals around, rather than with transistors or electronic switches.
- Power output:60W RMS into 8 Ohms, 90W RMS into 4 Ohms
- DAC:Wolfson WM8740
- Frequency Response:
|
First Impressions
If youʼre impressed by elegantly restrained industrial design, the MM7025 is guaranteed to make a lasting – and very positive – impression. The subtly curved aluminum/glass resin front panel adds a sophisticated touch that complements any décor. The central porthole display reflects iconic Marantz designs of the past while it brings you an "at a glace” view of the amplifierʼs operating status.
Front Panel | Aluminum/Glass-reinforced resin |
Power Requirement | AC 120V 60Hz |
Power Consumption | 330W (Standby: 0.2W) |
Dimensions W x H x D (Inchs) | 17-3/8 x 4-15/16 x 13-7/8 |
|
Reviews
There are no reviews yet.