| Content |
| Audio Specifications and Features |
|---|
| Stereo Power | 120 watts per channel, two channels driven @ 6/8 ohms, 20Hz – 20kHz, | | Signal-to-noise Ratio (IHF-A) | 100 dB | | Input Sensitivity/Impedance | 250mV/27k ohms |
| Audio Connectivity Features |
|---|
| Analog Audio Input (Rear) | 5 | | Phono Input | 1 | | FM Tuner Features |
|---|
| Frequency Range MHz | 87.5 MHz | | Usable Sensitivity (IHF) | 1.3μV/13.2dBf | | Signal-to-Noise Ratio (Mono/Stereo) | 70dB/68dB | | Distortion (Mono/Stereo) | 0.2%/0.3% | | Stereo Separation @ 1kHz | 40 dB | | Selectivity ±400kHz | 70 dB | | AM Tuner Specifications |
|---|
| Frequency Range kHz | 520 kHz | | Signal-to-Noise Ratio | 38dB dB | | Usable Sensitivity (Loop) | 500μV | | Selectivity | 30dB | | Distortion | 1.0% | | General Specifications |
|---|
| Power Requirement | 120V AC, 60Hz (USA); 220V – 240V AC, 50Hz/60Hz (EU) | | Dimensions (H x W x D – Metric/English) | 4-3/4" x 17-5/16" x 11-13/16" (121mm x 440mm x 300mm) | | Weight (Metric/English) | 6 kg (12 lb) | |
High sound quality Network HiFi Receiver with support for DSD 5.6MHz reproduction. Compatible with MusicCast and packed with network functions. Unlimited enjoyment of many different sound sources, including hi-res sources, smartphones and streaming services.
- MusicCast expands entertainment possibilities
- Streaming services offer a huge range of listening choices
- Enjoy the entire spectrum of all your favorite modern music sources
- 5.6MHz DSD Native and AIFF 192kHz/24bit reproduction with high performance 24-bit D/A converter
- MusicCast CONTROLLER lets you operate from your smartphone or tablet
- Wireless music streaming via Bluetooth® or AirPlay
- Bluetooth Output for convenient music streaming
- USB digital connection for iPod, iPhone, and USB devices
- Pure Direct Mode for greater sound purity
- Digital audio input for TV or Blu-ray player
- Eco Mode and Auto Power Standby
MusicCast
MusicCast is a new revolution in network audio, use all your MusicCast products together or separately, itʼs completely up to you. Control it, all from one app, designed to be intuitive, quick and simple to use. Use a soundbar, a wireless speaker, an AV Receiver, HiFi audio whichever suits you best, mix and match then expand your MusicCast system as time goes on. All new from Yamaha, the MusicCast system brings everything to everywhere for everyone.
MusicCast Expands Entertainment Possibilities
MusicCast employs a high performance wireless network to deliver music and audio enjoyment. It can stream digital music content from your smartphone, PC or NAS to other MusicCast devices in your home. It can also share the music from external devices such as a CD player or TV connected to the R-N602. Audio content from Bluetooth-connected smartphones or tablets can also be streamed to MusicCast devices in multiple rooms.
Enjoy the Entire Spectrum of All Your Favourite Music Sources
The R-N602 is a receiver and network audio player in a single unit. You can use it to easily play audio sources downloaded from the Internet and stored on a PC or NAS system. Or, enjoy streaming music services and internet radio (with vTuner). Moreover, Yamahaʼs original MusicCast App allows you to enjoy your favourite tunes on a smartphone or tablet device via wireless connection.
Streaming Services Offer a Huge Range of Listening Choices
Support for the music streaming services Spotify, Pandora, Juke, Napster, Rhapsody and Sirius XM means youʼll enjoy a wide variety of music content. Furthermore, support for the vTuner radio station database enables sampling of Internet radio broadcasts from around the world.
*Music service availability varies by region.
Wireless Music Streaming via Bluetooth or AirPlay
Enjoy music from your smartphone or tablet wirelessly using a Bluetooth connection. You can also use the convenient AirPlay function for wireless music streaming from iPhone or iPads. In addition, a Network Standby function providest he convenience of having the R-N602 turn on and off automatically.
Bluetooth Output for Convenient Music Streaming
The R-N602 is equipped with the latest Bluetooth technology, making wireless operation more convenient than ever. You can stream music from the R-N602 to Bluetooth headphones for private listening or to Bluetooth speakers.
Easy setup with your smartphone or tablet
Use your smartphone or tablet together with the MusicCast CONTROLLER app to operate the speaker and change settings quickly and easily. The same Controller app functions as a remote control for all your MusicCast-compatible devices too.
Other Notable Features
• Continuously Variable Loudness Control
• Terminal for a Subwoofer
• Phono MM terminal for vinyl playback
• Screw-type speaker terminals
• 40 station FM/AM preset tuning
• Speaker selector and speaker terminals for two systems
Receiver / Integrated Amplifier
| Network section |
DLNA |
Version 1.5 |
| File Format |
MP3, WMA, MPEG4 AAC, WAV, FLAC, AIFF, ALAC, DSD |
| Wi-Fi |
Yes (with Wireless Direct) |
| AirPlay |
Yes |
| Bluetooth |
Yes (SBC/AAC) |
| Minimum RMS Output Power |
80W + 80W (8 ohms, 40 Hz-20 kHz, 0.04% THD) |
| Maximum Power (4 ohms, 1kHz, 0.7% THD, for Europe) |
105 W + 105 W |
| Maximum Power(8 ohms, 1 kHz, 10% THD) |
115 W + 115 W |
| High Dynamic Power/Channel (8/6/4/2 ohms) |
105 / 125 / 150 / 178 W |
| Frequency Response |
0 ± 0.5 dB / 0 ± 1.0 dB |
| Total Harmonic Distortion (CD to Sp Out, 20 Hz-20 kHz) |
0.015% (40 W / 8 ohms) |
| Signal-to-Noise Ratio (CD) |
100 dB (Pure Direct on, 200 mV) |
| Audio In / Out |
9 / 2 |
| USB Input |
Yes |
| Subwoofer Out |
Yes |
| FM 50dB Quieting Sensitivity (IHF, 1 kHz, 100% Mod., Mono) |
3 µV (20.8 dBf) |
| FM Signal-to-Noise Ratio (Mono/Stereo) |
65 dB / 64 dB |
| ToP-ART |
Yes |
| Standby Power Consumption |
0.1 W |
| Dimensions (W x H x D) |
435 x 151 x 392 mm; 17-1/8” x 6” x 15-7/16” |
| Weight |
9.8 kg; 21.6 lbs. |
|
Τi 60 tube
Integrated tube amp.Four line inputs.
2X12AU7, 4x EL34, 1x12AX7
35 Wrms per chan.4-8 ohm.
Class AB push-pull
Remote control included.
|
Technical specification
|
| |
|
Integrated Amplifier
| |
Frequency response:
|
10 Hz - 50 kHz (± 0.5 dB)
| |
Total harmonic distortion (THD):
|
1 % (1 kHz)
| |
Signal-to-noise ratio:
|
92 dB
| |
Input Impedance:
|
100 kOhm
| |
|
| |
Vacuum tube:
|
4x KT88/EL34, 2x 12AU7, 2x 12AX7, 2x 6SN7
| |
Dimensions W x H x D:
|
440 x 220 x 390 mm
| |
Weight:
|
28 kg
| |
Accessories:
|
Remote Control
| |
Input Terminals:
|
Tape, CD, AUX, Tuner
| |
Output terminals:
|
Tape out
| |
Circiut:
|
Class A/B P.P.
| |
Colour:
|
Chassis chrome, transformer black
| |
Colour front:
|
black, silver
| |
Sensitivity
|
590 mV
| |
Output Impedance:
|
4 Ohm, 8 Ohm
| |
Power Output:
|
2 x 70 Watt @ 1 % THD
| |
Consumption:
|
max. 380 Watt
| |
Highlights
|
switchable reduction of feedback
|
|
Toroidal Transformer
We mount the premium toroidal transformer centrally, to reduce flux or magnetic disturbance from the volume pot.
Dynamic Thermal Tracking transistors
The output power transistors used by the CXA60 are not your usual common or garden offerings. They come with an integrated Dynamic Thermal Tracking System. So what does this mean? Normally a Power Output transistor utilises a thermo-coupler attached directly to the heat sink of the amp; this informs the system so that it can re-bias when key temperatures are reached. However, using Integrated Dynamic Thermal tracking provides a far more accurate reading of the real temperature of a transistor, and relays it faster too because itʼs not a delayed heating effect. This enables us to bias the amplifier more accurately and in almost real time. Which means your CXA60 is always running at optimum performance.
Musical Subwoofer output
If you want to use a subwoofer as part of your speaker complement, the CXA60 doesnʼt penalise you for it. Because we want to ensure thereʼs no unnecessary high frequency noise affecting the subwoofer, weʼve put the output filter at 3kHz. This is high enough to prevent any phase shift associated with the low pass filter affecting what happens below 200Hz. The result is a phase linear subwoofer output signal which is clean and musical.
Fully balanced signal management
Thereʼs some revolutionary signal management happening beneath the lid of the CXA60. For the first time, our engineers decided to go fully balanced rather than single-ended all the way through. As a consequence, any noise that that might be picked up in the audio signal while routing through the amplifier is cancelled before itʼs output.
Reinventing the signal path
The CX range represents a step change in the way our engineers have approached signal path design, and the result is one of our most musical and entertaining amplifiers yet. Previously, we went to almost surgical lengths to minimise distortion in order to get the best results. This invariably meant 46 components sat in the signal path. For the CX Series, we wanted to dramatically reduce that component count. The CXA60 now has only 24 components in the signal path. The big difference is that there are now 500 support components as well.
Their job is to guarantee those 24 key components are absolutely optimal all the time, regardless of mains fluctuations and other influences. This has made a big difference when it comes to tuning. Previously, tweaking one of the 46 components only made a small difference and it was sometimes difficult to quantify exactly what difference any change made. With the CX series, those 24 components have now actually become quite critical. Changing just one affects the character of the amplifier. We can hear very clearly what each of those components is doing.
This revision has fundamentally changed the character of the amplifier. Listening to a CX series amplifier is fun, engaging and exciting.
Bespoke Bluetooth
If you want to use your CXA60 with a Bluetooth source, we offer an optional BT100 audio receiver. To ensure that this does not interfere with other components in the amplifier, itʼs isolated internally on the digital input board. From the ground up, this is an audiophile Bluetooth device. All the coding for the BT100 is done in-house. We even include an extension cable which enables you get the best Bluetooth range.
Embracing classic design
Sometimes thereʼs a good reason to keep things uncomplicated. The CXA60 features a high-quality damped metal chassis, designed to ensure that nothing rattles or interferes with the electronics. Weʼve also kept volume control simple. The CXA60 uses a logarithmic ALPS pot. And when it comes to switching inputs, the CXA60 uses relay switching with silver plated contacts. This classic approach is still the best way to move signals around, rather than with transistors or electronic switches.
- Power output:60W RMS into 8 Ohms, 90W RMS into 4 Ohms
- DAC:Wolfson WM8740
- Frequency Response:
|
The 851W has class XD amplification at 200W into 8 Ohms in stereo mode or 500W RMS per amp in mono bridged mode, separate toroidal transformers for the power amp and input/other circuitry, and terrapin impedance buffering modules. All in all it\'s the best sounding amplifier we have ever made.
Our proprietary Class XD amplification
Separate toroidal transformers for power amp and input/other circuitry
Our bespoke Terrapin impedance buffering modules – separating amplifier and signal impedance
200W into 8 Ohms stereo mode or 500W RMS per amp mono bridged mode
CAP5 protection from DC spikes, overheating and clipping
All metal chassis with premium components
Remote Control – Compatible with the entire 851 range
Power output – stereo/mono 200W per channel into 8 Ohms
350W per channel into 4 Ohms
Power output – bridged mono 500W 8 Ohms
800W 4 Ohms
THD (unweighted) < 0.001% 1 kHz
< 0.005% 20 Hz - 20 kHz
Frequency response 5Hz – 80kHz
S/N ratio (ref 1W / 8 Ohn) >90dB (unweighted)
Sensitivity – stereo or mono 1.5V rms unbalanced
1.5 + 1.5V rms balanced
Sensitivity – bridged mono 0.775V rms unbalanced
0.775V + 0.775V rms balanced
Input impedances Balanced input 38 kOhm
Unbalanced input 68 kOhm
Power amp damping factor > 110 at 1 kHz
Max. power consumption 2400W
Standby power consumption Standby |
Class XD™ amplification designed to eliminate crossover distortion at low signal levels
New balanced volume topology controllable in 1dB steps, giving very fine control, and superbly accurate channel balance
Audiophile grade oversize toroidal transformer and substantial extruded heatsink allowing 2 x 120 Watts RMS into 8 Ohms or 2 x 200W into 4 ohms.
Separate transformer taps for left and right channels, twin rectifiers and separate PSUs for dual mono operation of the left and right power amplifiers
A separate toroidal transformer supplies the preamp making the 851A effectively a Pre and Power amp combination in one box
CAP5 protection technology for trouble free operation
Acoustically damped full metal chassis with thick brushed aluminium front panel
Customisable front panel display
Balanced and unbalanced analogue audio inputs for superior connectivity
RS232 controllable
Eco-friendly Available in black and silver finishes
![]()
|
Reviews
There are no reviews yet.