ART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP

97.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
HeadAMP – Four Output Stereo Headphone Amp Overview Most home recordings involve from one to four people, any or all of whom are going to need headphone monitoring. The monitor amp would be connected to the tape deck?s headphone output or a mixer output so that the performers can hear themselves and each other. Of […]

 

Read more

HeadAMP – Four Output Stereo Headphone Amp Overview

Most home recordings involve from one to four people, any or all of whom are
going to need headphone monitoring. The monitor amp would be connected
to the tape deck?s headphone output or a mixer output so that the performers
can hear themselves and each other. Of course the same application can apply
to band rehearsals and even home entertainment. HeadAMP provides amplification
and individual volume control for up to 4 headsets. It can be driven by either line-
level or headphone amplifier signals (mono or stereo).

HeadAMP – Four Output Stereo Headphone Amp Specifications:

Signal To Noise Ratio >90dB
IMD (SMPTE) 0.01%
Maximum Input Level +14dBV
Maximum Output Level 20dB per channel
Output Impedance 51 Ohms per channel
Output Connectors Four stereo 1/4? headphone outputs
Power Requirements 12V DC (Adapter included) 
Total Harmonic Distortion

Weight 0.59 kg

Reviews

There are no reviews yet.

Be the first to review “ART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP”

Your email address will not be published. Required fields are marked *

Quick Comparison

ART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP removeVOX AMPLUG NIGHT TRAIN Guitar Headphone Amp removeTASCAM MH-40MKII HEADPHONES PRE-AMPLIFIER removeBEHRINGER P1 POWERPLAY PERSONAL IN-EAR MONITOR AMPLIFIER removeAPOGEE GROOVE HEADPHONES AMP , USB DAC removeLD SYSTEMS HPA 4 Compact HEADPHONE AMPLIFIER 4 CHANNELS remove
NameART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP removeVOX AMPLUG NIGHT TRAIN Guitar Headphone Amp removeTASCAM MH-40MKII HEADPHONES PRE-AMPLIFIER removeBEHRINGER P1 POWERPLAY PERSONAL IN-EAR MONITOR AMPLIFIER removeAPOGEE GROOVE HEADPHONES AMP , USB DAC removeLD SYSTEMS HPA 4 Compact HEADPHONE AMPLIFIER 4 CHANNELS remove
Image
SKUAT/EM/000036VOX AMPLUG NIGHT TRAINMH-40MKIIE006394GROOVELDHPA4
Rating
Price 97.00 incl. GR VAT 30.51 incl. GR VAT 565.55 incl. GR VAT 75.00 incl. GR VAT 271.56 incl. GR VAT 49.00 incl. GR VAT
Stock

Available on backorder

In stock

In stock

Available on backorder

Available on backorder

In stock (can be backordered)

AvailabilityAvailable on backorderIn stockIn stockAvailable on backorderAvailable on backorderIn stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

HeadAMP - Four Output Stereo Headphone Amp Overview

Most home recordings involve from one to four people, any or all of whom are
going to need headphone monitoring. The monitor amp would be connected
to the tape deck?s headphone output or a mixer output so that the performers
can hear themselves and each other. Of course the same application can apply
to band rehearsals and even home entertainment. HeadAMP provides amplification
and individual volume control for up to 4 headsets. It can be driven by either line-
level or headphone amplifier signals (mono or stereo).

HeadAMP - Four Output Stereo Headphone Amp Specifications:

Signal To Noise Ratio >90dB
IMD (SMPTE) 0.01%
Maximum Input Level +14dBV
Maximum Output Level 20dB per channel
Output Impedance 51 Ohms per channel
Output Connectors Four stereo 1/4? headphone outputs
Power Requirements 12V DC (Adapter included) 
Total Harmonic Distortion

The amPlug Night Train perfectly simulates the high-gain sound of the compact VOX Night Train tube amp. Just as with the actual Night Train head, you can switch between the two preamp sounds. The BRIGHT position boosts the high-frequency range; the THICK position offers a chunkier, heavier sound. The emulated speaker cabinet circuit accurately recreates the sound of the Night Train amp being played through the matching V112NT single 12" Night Train speaker cabinet. As a finishing touch, amPlug Night Train share some of the cool looks of its namesake amplifier.

Specifications
  • Controls: Gain, Tone, Volume; STANDBY/ON/FX switch
  • Terminals: PHONES Jack (stereo), AUX In Jack (stereo)
  • Power supply: AAA batteries (x 2)
  • Battery life: amPlug Night Train:
  • With zinc-carbon batteries: approximately 9 hours
  • With alkaline batteries: approximately 24 hours
  • Dimensions (W x D x H): 86 x 80 x 31mm/3.39" x 3.15" x 1.22“
  • Weight: 40 g/1.41 oz. (not including batteries)
  • Included items: AAA batteries (X2) (for verifying operation)

 

Specifications
General

Frequency response
    

 
    

20 Hz - 20  kHz (+0 dB, -1.5 dB)

Signal-to-noise ratio
    

 
    

100  dB (IHF A-weighted, input level control min.)

Channel separation
    

 
    

80 dB between adjacent channels

Line input
    

 
    

Front: 6.3 mm jacks, unbalanced
Rear: RCA connectors, unbalanced

   Input impedance
    

 
    

40 kOhm

   Nominal level
    

 
    

-10 dBV (0.3 V)

Headphone outputs
    

 
    

four 6.3 mm stereo jacks

   Maximum output power
    

 
    

2 x 1.5 W at 8 Ohm (1 channel in use)
2 x 1,2 W an 8 Ohm (four channels in use)

Power supply
        

230 V AC, 50 Hz

Power consumption
    

 
    

10 W

Dimensions (W x H x D)
        

482  mm x 44  mm x 196  mm

Weight
    

 
    

4 kg

In-ear monitor amplifier for personal monitor applications. High power and \"drummer proof\" headphones output. Dual XLR inputs allow for 2-channel mono or stereo operation. Switchable stereo/mono operation with mix function. Level and Balance/Mix controls. Runs up to 12 hours on a 9 V battery (not included). Integrated current limit protects your ears and headphone. Convenient belt-pack clip included. Mounts easily on a standard mic stand with 5/8” and 3/8” thread.
Brand BEHRINGER
Model P1
Part Number 000-AZM
Mixing Channels 2
Warranty 1 Year
Application Portable PA
Series P series

Info

Apogee Groove is the best portable USB DAC and headphone amp for listening to music on your Mac or PC. Groove takes the same high quality audio technology found in the worldʼs most prestigious recording studios and delivers it to your laptop. Connect Groove directly to your computer and connect your headphones or powered speakers directly to Groove. Itʼs that easy. Youʼll be amazed by the difference in sound quality. Highlights: USB 2.0 connection to Mac and PC Up to 24 bit / 192kHz audio ESS Sabre DAC Constant Current Drive?, Ultra-smooth frequency response for any headphones Quad Sum DAC?, 4 DACs per channel for highest dynamic range and lowest distortion Asynchronous clocking Max output level: 225mW into 30 Ohm Multi-color LEDs for status and level indication Powered by USB Top panel buttons for adjusting output level and muting Compact and portable (95mm H x 30mm W x 16mm T) Premium aluminum build quality Built in the USA Pricing to be announced

LD Sytems HPA 4 - a compact and powerful headphone amplifier The LDHPA4 has small dimensions, can handle up to 4 headphones and has an output power with no equal in its class. That means high volume with no distortion. With these features the LDHPA4 is an essential tool for every project- and home studio. Specifications Product type Headphone Amp:
Inputs 2
Input connectors 6.3 mm TRS , RCA
Input impedance 1 k Ohm(s)
Outputs 2
Output connectors 6.3 mm Jack
Power output 4 x 100 mW
Minimum connected impedance 10 Ohm(s)
Frequency response 20 - 20.000 Hz
Controls 4 x headphone volume , Mono/stereo switch
Indicators Power
Operating voltage External Power Supply
Operating voltage 24 V DC
Cabinet material metal
Cabinet surface painted
Width 94 mm
Height 48 mm
Depth 82 mm
Weight 0,27 kg
Accessories (included) power supply
Weight0.59 kg0.40 kg4.00 kg0.40 kg1.00 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.59 kg
Weight 0.40 kg
Weight 4.00 kg
Weight 0.40 kg
Weight 1.00 kg
Weight 0.50 kg