ART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP

97.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
HeadAMP – Four Output Stereo Headphone Amp Overview Most home recordings involve from one to four people, any or all of whom are going to need headphone monitoring. The monitor amp would be connected to the tape deck?s headphone output or a mixer output so that the performers can hear themselves and each other. Of […]

 

Read more

HeadAMP – Four Output Stereo Headphone Amp Overview

Most home recordings involve from one to four people, any or all of whom are
going to need headphone monitoring. The monitor amp would be connected
to the tape deck?s headphone output or a mixer output so that the performers
can hear themselves and each other. Of course the same application can apply
to band rehearsals and even home entertainment. HeadAMP provides amplification
and individual volume control for up to 4 headsets. It can be driven by either line-
level or headphone amplifier signals (mono or stereo).

HeadAMP – Four Output Stereo Headphone Amp Specifications:

Signal To Noise Ratio >90dB
IMD (SMPTE) 0.01%
Maximum Input Level +14dBV
Maximum Output Level 20dB per channel
Output Impedance 51 Ohms per channel
Output Connectors Four stereo 1/4? headphone outputs
Power Requirements 12V DC (Adapter included) 
Total Harmonic Distortion

Weight 0.59 kg

Reviews

There are no reviews yet.

Be the first to review “ART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP”

Your email address will not be published. Required fields are marked *

Quick Comparison

ART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP removeVOX AMPLUG NIGHT TRAIN Guitar Headphone Amp removeLD Systems HPA 1 - Amplifier for headphones and wired IEM In-Ear-Monitoring removeSOUND DEVICES HX-3 Portable Headphone Amplifier removePRESONUS HP-4 FOUR CHANNEL HEADPHONE DISTRIBUTION AMPLIFIER removePALMER PMONICON Pro MONICON - Passive Monitor Controller remove
NameART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP removeVOX AMPLUG NIGHT TRAIN Guitar Headphone Amp removeLD Systems HPA 1 - Amplifier for headphones and wired IEM In-Ear-Monitoring removeSOUND DEVICES HX-3 Portable Headphone Amplifier removePRESONUS HP-4 FOUR CHANNEL HEADPHONE DISTRIBUTION AMPLIFIER removePALMER PMONICON Pro MONICON - Passive Monitor Controller remove
Image
SKUAT/EM/000036VOX AMPLUG NIGHT TRAINLDHPA1HX-3HP4 EUPMONICON
Rating
Price 97.00 incl. GR VAT 30.51 incl. GR VAT 119.95 incl. GR VAT 491.97 incl. GR VAT 138.87 incl. GR VAT 70.00 incl. GR VAT
Stock

Available on backorder

In stock

Only 4 left in stock (can be backordered)

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderIn stockOnly 4 left in stock (can be backordered)Available on backorderAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

HeadAMP - Four Output Stereo Headphone Amp Overview

Most home recordings involve from one to four people, any or all of whom are
going to need headphone monitoring. The monitor amp would be connected
to the tape deck?s headphone output or a mixer output so that the performers
can hear themselves and each other. Of course the same application can apply
to band rehearsals and even home entertainment. HeadAMP provides amplification
and individual volume control for up to 4 headsets. It can be driven by either line-
level or headphone amplifier signals (mono or stereo).

HeadAMP - Four Output Stereo Headphone Amp Specifications:

Signal To Noise Ratio >90dB
IMD (SMPTE) 0.01%
Maximum Input Level +14dBV
Maximum Output Level 20dB per channel
Output Impedance 51 Ohms per channel
Output Connectors Four stereo 1/4? headphone outputs
Power Requirements 12V DC (Adapter included) 
Total Harmonic Distortion

The amPlug Night Train perfectly simulates the high-gain sound of the compact VOX Night Train tube amp. Just as with the actual Night Train head, you can switch between the two preamp sounds. The BRIGHT position boosts the high-frequency range; the THICK position offers a chunkier, heavier sound. The emulated speaker cabinet circuit accurately recreates the sound of the Night Train amp being played through the matching V112NT single 12" Night Train speaker cabinet. As a finishing touch, amPlug Night Train share some of the cool looks of its namesake amplifier.

Specifications
  • Controls: Gain, Tone, Volume; STANDBY/ON/FX switch
  • Terminals: PHONES Jack (stereo), AUX In Jack (stereo)
  • Power supply: AAA batteries (x 2)
  • Battery life: amPlug Night Train:
  • With zinc-carbon batteries: approximately 9 hours
  • With alkaline batteries: approximately 24 hours
  • Dimensions (W x D x H): 86 x 80 x 31mm/3.39" x 3.15" x 1.22“
  • Weight: 40 g/1.41 oz. (not including batteries)
  • Included items: AAA batteries (X2) (for verifying operation)

 

The LD Systems HPA 1 is a versatile headphone amplifier with high power output for stage, studio and home recording and is the perfect solution for wired in-ear-monitoring.. The compact device in a rugged, ergonomically shaped plastic housing with soft-touch surface and practical belt clip is very extensively equipped. In addition to locking XLR connectors for the stereo signal L/R input, the HPA 1 has a balanced 3.5 mm stereo jack as AUX input, which can be used in parallel for clicks or playback. It is protected for safe operation against excessive input levels; a hollow pin socket with negative internal contact enables the connection of a network adapter for fixed operation. A 3.5 mm stereo jack is provided as earphone and headphone output. Volume level and balance can be set with easy-grip knobs, a push-button switches between the summed mono and stereo signals. A full-fledged limiter is integrated for distortion-free playback and as protection against feedback. The LD Systems HPA 1 has bi-colour LEDs to facilitate the features overview, which displays the response of the limiter during peaks and the battery status. At 165 grams, the headphone amplifier is distinctly light-weight and can be operated for up to 12 hours thanks to a high quality 9 V block battery.
  • Model Name: LDHPA1
  • Product Type: headphone amplifier
  • Type: 1-channel stereo
  • Inputs: Main Input (Stereo), 1 x Aux In (Stereo)
  • Input Connections: XLR-F (L + R Input, balanced), 3.5 mm stereo jack (Aux In)
  • Input Impedance: 6 kOhm (XLR In), 10 kOhm (3.5 mm jack)
  • Input Sensitivity: 3 dBu (XLR In), -6 dBV (3.5 mm jack)
  • Max. Input Level: 16 dBu (XLR In), 7 dBV (3.5 mm jack)
  • Protection Circuits: Audio Limiter, Max. Input leveling, Power OFF -Mute relay
  • Headphone Outputs: 1
  • Headphone Output Connectors: 3.5 mm stereo jack
  • Power Output: 2 x 1.65 Vrms / 1% THD 33 Ohm Load
  • Minimal Connected Impedance per Channel: 16 ohms
  • Frequency Response: 20 Hz - 40,000 Hz
  • THD 1 kHz Sine: 0.04%
  • Controls: Power/Volume, Balance L/R, Stereo/Mono (Focus) switch,
  • Indicators: Signal (Green) / Peak (Amber), Battery (low battery: red) / Power LED (Power ON: green)
  • Power Supply: 9 V DC block battery, DC jack
  • Operating Voltage: 9 V DC
  • Power Consumption: Nom. 70 mA / Max. 150 mA
  • Housing Material: plastic
  • Housing Surface: soft-touch
  • Housing Colour: black
  • Width: 80 mm
  • Height: 42.5 mm
  • Depth: 133 mm
  • Accessories (included): belt clip, 1 m 3.5 mm stereo jack cable

The compact HX-3 Headphone Distribution Amplifier is the perfect accessory to quickly provide three high-performance stereo headphone feeds with individual level controls from line-level sources. The HX-3 can produce very high headphone levels with extremely low noise and distortion.

HX-3 Key Features

Great for radio, television, film, and music production applications, the battery-powered HX-3 accepts balanced XLR line-level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs. Its 1/4-inch loop-out can connect multiple HX-3's for additional headphone outputs. Headphones are connected to panel-mounted 1/4-inch stereo connectors.

The HX-3 has a durable aluminum chassis to withstand the punishment of field and studio environments. The unit is powered by inexpensive batteries (two-AA) or external 5-18 VDC.

The HX-3 can add headphone outputs to the 552, 302, MixPre-D, MM-1, and USBPre-2.

HX-3 Key Features List
  • Three isolated headphone outputs with individual volume controls.
  • 125 dB dynamic range with flat frequency response.
  • Durable 1/4-inch connectors, panel mounted for strength.
  • Stereo or mono monitoring.
  • Peak LED indicates headphone overload.
  • Two balanced XLR line level inputs or unbalanced 1/4-inch and 1/8-inch stereo inputs.
  • Loop Output to connect additional HX-3's in series.
  • All-metal connectors solidly mounted to the chassis for durability and RF immunity.
  • Free from "Pin-1" grounding problems.
  • Internal battery-power for up to 18 hours from two AA alkaline batteries.
  • Chassis-isolated 5 to 18 VDC input for easy external DC powering.
  • Power LED indicates low battery power.
  • High strength, extruded aluminum chassis with protective metal end panels.

 

The new HP4 from PreSonus answers the need for a headphone distribution amplifier with professional specifications in a small package at an affordable price. The HP4 features four discrete headphone outputs on the front panel each with its own volume potentiometer and 150mW of amplification per channel. The HP4 also features adjustment over control room monitors with a separate volume control, monitor mute switch and mono switch giving you an extremely powerful monitoring solution at an amazingly low price. Features ? Four High Power Headphone Outputs ? Ultra loud (150mW per channel) ? Ultra quiet operation ? Musical Wide Dynamic Range ? Control Room Monitor Outputs with Level Control ? Mono or Stereo Operation ? Monitor Mute Switch ? Daisy Chain an Infinite Number of Units ? Compact package Technical Specifications Input TRS Impedance 10K Ohms Panel Controls Headphone Level 1 to 12 Monitor / Feed Output -80dB to +10dB Mono Switch Monitor / Feed Mute Power Supply Type Linear Input 16VAC/1000mA Output TRS Balanced 51 Ohms Impedance Performance THD+Noise (Unweighted) 0.002% Noise Floor  -98dB Signal To Noise >95dB Power Supply Rejection >98dB Power 16 Watts Physical Weight  5lbs./ 2.3 kg. Dimensions 5.5 x 5.5 x 1.75 Mounting Max Rack and Universal Rack Tray Chassis Steel Panel Brushed Aluminum Sides Cast AluminumPalmer Monicon, and the volume is right! With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal. The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
  • Type: passive
  • Number of channels: 2
  • Number of inputs: 2
  • Input connections: XLR Combo / 3.5mm stereo jack
  • Input type: balanced/unbalanced
  • Maximum input level: +20 dBu
  • Input impedance: 10 kohms balanced/ 5 kohms unbalanced
  • Number of outputs: 2
  • Output connections: XLR/m, 3.5 mm stereo jack
  • Output type: balanced/unbalanced
  • Max output level: +20 dBu
  • Output impedance: 600 ohms
  • Frequency response: 10Hz - 40 kHz +/- 1 dB
  • THD: 0,001 %
  • Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
  • Controls: Attenuation, Mute, Mono
  • Housing material: sheet steel/wood
  • Housing surface: powder-coated
  • Width: 164 mm
  • Height: 62 mm
  • Depth: 85 mm
 
Weight0.59 kg0.40 kg0.05 kg2.00 kg2.00 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.59 kg
Weight 0.40 kg
Weight 0.05 kg
Weight 2.00 kg
Weight 2.00 kg
Weight 1.00 kg