Content | VoiceTone E1 offers singers the signature echo and slapback effects that evoke classic songs while putting effects control at their feet. Now, high quality, immersive echo effects for the stage are no longer just for guitarists.
Adds a wide range of echo effects for more depth in your vocals
Footswitch tapping can set echo times to song tempo
High quality signal path and tough enclosure
Can be chained to additional VoiceTone Singles
Mic-Control offers remote on/off via TC-Helicon MP-75 microphone
12 Flavors of Echo & Delay types:
Slap echo 1 & 2
Tap – 1/4, 1/8, Triplet 1/8th, Dotted 1/8th, Triplet 1/4, Dotted 1/4 notes
Echo FX 1 & 2
Filter control (smart EQ band limiting)
Powerfully easy
From Rockabilly-style "tape slap” echo to trance-inducing long echo trails timed to your songʼs tempo, VoiceTone E1 can excite your vocals and your audience more than ever before. And itʼs so easy to use; leave it on one setting throughout your performance or change it up for different songs. When itʼs time to talk to your audience, clear, dry banter is just a footswitch tap away.
As simple as plugging in your mic
Gaining access to the studio quality sounds and intelligent processing of VoiceTone singles is as simple as plugging in your mic and turning the effect on. Of course, you can always change the style or the amount of effect, but you shouldnʼt need to unfold the manual unless youʼre making a fire.
Strong family genes
Each VoiceTone single shares the same genes: a clean, quiet mic preamp that rivals high-end touring mixers, a die-cast metal case, rubberized no-slip base, studio quality analog to digital conversion, and the same quality processing youʼd expect from our flagship vocal processors like VoiceLive 2.
- See more at: http://www.nakas.gr/ecomnakas/nakas2006/default.asp?static=421&product=133028#sthash.cRLFG5bn.dpuf |
Size
Height: 5.4 inches (140 mm)
Width: 3.5 inches (90 mm)
Depth: 2.3 inches (60 mm)
Weight
Weight: 0.92 lb. (0.42 kg)
Construction
Two part dies cast metal
Rubberized base
Connections
Analog Inputs
Connectors, balanced: Mic.: XLR
Mic Input Level @ 0 dBFS: -42dBu to +1dBu
EIN @ Max Mic Gain Rg = 150 Ohm: -126 dBu
Mic input SNR: >104 dB
Guitar Input impedance: 1 MOhm
Guitar Input Level @ 0 dBFS: -7 dBU to 17 dBu
Guitar Input SNR: >115dB
Analog Outputs
Output Impedance, Bal./Unbal.: 200/100 Ohm
Output Full Scale: +1 dBu
Dynamic Range: >104 dB, 20 Hz to 20 kHz
Frequency Response: +0/-0.3 dB, 20 Hz to 20 kHz
Control
USB for firmware and control
Mic Control using TC-Helicon MP-75
Details
Power
Power Supply (Supplied): 12V .4A
Power Consumption: 5.6W
Safety
EMC – Complies with EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B
Safety – certified to IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500 and CSA
Operating Requirements
Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -22°F to 167°F (-30°C to 70°C)
Humidity: Max. 90 % non-condensing
Included with VoiceTone H1
Region specific power supply
USB cable
User guide
1 year warranty parts and labor
| User´s Manual
LD Systems FX 300
2-Channel Pedal with 16 Digital Effects
- Microphone input for dynamic and condenser microphones
- 16 digital effect presets in 16-bit quality
- Low-noise instrument input with high input impedance for acoustic guitars, bass guitars or other instruments
- Separate FX sends for both channels, additional FX loop for the instrument input
- HPF and +48 V phantom power for microphone input
- Signal/peak LEDs for both channels and clip LED for the effects
- FX MUTE pedal for muting effects
- MUTE ALL pedal for muting outputs
- Balanced and unbalanced output
- Operated on 9 V battery or optional power supply (LDFX300PS)
For a singer-songwriter performing on stage or giving a concert in a living room, sound is everything.
LD Systems FX 300 will blow you away right from the moment you start your show, even if you\'ve had little to no time to carry out a soundcheck. This small yet handy device not only serves as an effect pedal for altering the sound of your voice and instrument but is also an easy-to-use two-channel mixer. Its best feature by far are the pedals that let you control the mute functions with your feet or hand. And if you\'ve got something to say, you can simply mute all effects with the FX MUTE pedal so your voice can be heard loud and clear without any reverb or delay and everyone in the room can understand your message. To prevent the signal of your microphone or instrument from reaching the outputs, all you need to do is tap the MUTE ALL pedal - a lifesaver during breaks or when wrapping up your set.
The FX 300 is outfitted with 16 digital effects presets in 16-bit quality, two inputs with a separate gain setting and a balanced and unbalanced output. The +48 V phantom power provided at the microphone input allows condenser microphones to be used in addition to dynamic microphones. The high-impedance, low-noise instrument input is not only great for acoustic or bass guitars but also for all other instruments. Plenty of headroom ensures you no longer have to worry about distorted signals. And with a 9 V battery that lasts up to five hours, LD Systems FX 300 has got you covered even if there\'s no outlet in sight.
Product type
Artist Pedal
Type
Home-Recording , Live
Channels
2
Microphone channels
Microphone channels
1
Mic inputs
XLR/6.3 mm jack
Frequency Response Microphone Channel
50 - 20000 Hz
Amplification range Microphone channel XLR input
42 dB
Mono Mic Input Input THD-N |
Voice Τone Τ1
Εξαιρετική ποιότητα ήχου χωρίς παραμορφώσεις
Υψηλής ποιότητας multi-band EQ
Compressor & de-esser
Δυνατότητα σύνδεσης με άλλα μοντέλα Voice Tone
Xαρακτηριστικά:
Αναλογικές εισόδους:
Connectors, balanced: Mic.: XLR
Mic Input Level @ 0 dBFS: -42dBu to +1dBu
EIN @ Max Mic Gain Rg = 150 Ohm: -126 dBu
Mic input SNR: >104 dB
Αντίσταση εισόδου κιθάρας : 1 MOhm
Επίπεδο εισόδου κιθάρας @ 0 dBFS: -7 dBU to 17 dBu
Είσοδος κιθάρας SNR: >115dB
Αναλογικές εξόδους:
Αντίσταση εξόδου Bal./Unbal.: 200/100 Ohm
Output Full Scale: +1 dBu
Δυναμικό εύρος : >104 dB, 20 Hz to 20 kHz
Απόκριση συχνότητας: +0/-0.3 dB, 20 Hz to 20 kHz
Control
USB for firmware and control
Mic Control using TC-Helicon
Μέγεθος
Ύψος: 5.4 inches (140 mm)
Πλάτος : 3.5 inches (90 mm)
Βάθος: 2.3 inches (60 mm)
Βάρος
Βαρος : 0.92 lb. (0.42 kg)
| Classic spring, hall, and plate effects are on hand—or rather, under foot. A 224 chamber and a digital plate algorithm are available from Universal Audio via their website and can be loaded into the pedal over USB. In addition to silent switching and buffered true bypass selection, the pedal offers a bevy of control, as well as instant save/recall of your favorite sounds as presets.
The pedal offers three classic verb effects, including:
- Spring 65: 3 Golden Unit spring reverb tanks pulled from classic 1960s American guitar amps.
- Plate 140: 3 vintage German plate reverbs captured at the iconic Record Plant studio.
- Hall 224: A trio of perfectly modeled late-1970s digital reverb algorithms.
In addition to these three effects, you'll have access to more from the Universal Audio website including a vintage digital plate and a model of a 224 chamber.
This dual-processor enables you achieve a powerful and authentic sound, and also facilitates simple preset loading with instant recall. Each effect gives you controls to take full advantage of the tone.
Just like classic and modern UA gear, this pedal is built to last. It also offers both true and buffered bypassing (thanks to a UAD firmware update), as well as silent switching onstage and in the studio.
This pedal offers an analog dry-through path to preserve the integrity of your guitar's tone. You'll be able to use the pedal in mono, stereo, and dual-mono setups, and you'll have the ability to select how the reverb trails off (or cuts abruptly) when you disengage the effect.
| Digitech DOD Rubberneck analog delay
- Delay effect in pedal form
- Analog operating mode
- Delay time 1,500 milliseconds
- Tap tempo
- Delay time modulation (Rubbernecking)
- True bypass
- Adjusting for time
- Repeats
- Level
- Rate&depth
- Gain & tone
- Adjusting for rubberneck rate regen
- Switch for selection of tap ratio (eighth / dotted eighth / quarter notes)
- Switch for selection of tails mode (off / on / on-no dry)
- Bi-color status LED and delay tempo indicator LED
- Footswitch bypass and tempo/regen
- Metal construction
- Operation with power supply (optional)
|
Reviews
There are no reviews yet.