| Content |
With the new HiMaxX series, FBT establishes a reference point on the scenario of 12” and 15” enclosures in polypropylene for sound reinforcement, introducing performance and technical content of a standard unthinkable up until now. FBT HiMaxX takes its place alongside the FBTMaxX series, exalting all the technical features.
The study of a new cabinet in polypropylene, the use of a switch mode power supply and high efficiency power amplifiers and the redesign of the loudspeakers were the activities of the FBT R&D team aimed at maximizing the power weight ratio.
This series comprises three models; two 2-way full-range enclosures in polypropylene, HiMaxX 40 (12”+1”) and HiMaxX 60 (15’’+1.4”), plus a compact 18’’ bandpass SUB in birch plywood (HiMaxX 100Sa).
Compact and light weight, HiMaxX brilliantly solve all the most demanding requests from buffs, musicians and professionals looking for powerful, versatile and very high quality loudspeaker enclosures. Ideal for live and sound reinforcement applications requiring ease of transport, they are also suited to fixed installations, thanks to the cabinets’ format and optional accessories.
- 2-way, bi-amplified in Bass- Reflex design
- B&C custom designed 380 mm (15”) neodymium woofer with 75 mm (3”) voice coil
- B&C 36 mm (1.4”) compression driver with 64 mm (2.5”) voice coil
- 700Wrms PWM LF power amplifier
- 200Wrms Class G HF power amplifier
- Switch mode power supply for an excellent ratio weight/power
- Analog signal processor limiter
- Completely redesigned control panel with:
- XLR Input and XLR Link
- Gain and Volume functions in a single potentiometer to improve user friendliness improving the dynamic range and input signal/noise ratio
- 3-band EQ (Bass, Mid, High)
- Ground-lift
- Diagnostic LED
- 90°H x 60°V constant directivity horn
- 4 x M10 anchoring points, 35 mm ø (1.38”) top-hat for speaker stand placement and wall bracket mount flange, 2 integrated carrying handles
|
Features
400 Watt digital bi-amplification
129 dB max spl
Wide dispersion 90 x 60 constant directivity horn
15" High power woofer, 3" voice coil
2" Titanium dome, high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 45 Hz ÷ 20 kHz
Max SPL: 129 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 2" 2.5" voice coil
Woofer: 15" 3" voice coil
Input/Output Section
Input connectors: xlr-jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1300 Hz
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Cabinet
Cabinet Material: Composite PP
Handles: 1 on top, 2 on sides
Pole Mount/Cap: yes
Grille: steel
Physical Specifications
Height: 708/27.8 mm/inch
Width: 437/17.2 mm/inch
Depth: 389/15.3 mm/inch
Net Weight: 26/57.32 kg/lbs
|
Features:
DH-1K 1.5-inch Titanium Diaphragm Compression Driver
EVS-15K 15-inch Woofer
124 dB max. SPL
500 W Class-D Amplifier
Integrated DSP with FIR filter
Cabinet
Powered two-way full-range speaker, 15" woofer, 1.5" compression driver, vented design
Maximum Amplifier Output Capability, IHF-A
500 W
Amplifier Power RMS
420 W
Max. SPL 1m / calc.
124 dB
Frequency Range (-10 dB)
50 Hz to 17 kHz
Nominal Coverage Angle
90° x 50° (Horizontal x Vertical)
Audio Input (LINE 1 or MIC/LINE 2)
XLR and 1/4" TRS combination
Audio Input (AUX)
Stereo RCA, unbalanced
Audio Output (LINK OUTPUT)
XLR, balanced
Digital Signal Processing
28/56-Bit, 48 kHz
Crossover Frequency
1.7 kHz
Product Dimensions (W x H x D)
708 x 432 x 382 mm
Net Weight
22.5 kg
Optional Accessories
---
SH-115A, Dust Cover
F01U270396
VPM 1500, variable speaker pole
F01U141047
BS 35, speaker stand
F01U141046 |
Powerful, Lightweight PA Speakers for Any Application You'll be impressed by how easy it is to fill a room with powerful, pristine sound with Turbosound Milan M15 powered loudspeakers. This 15-inch, 1,100-watt speaker is perfect for live music applications, and just as appropriate for schools, churches, or even corporate A/V installations. The coverage is wide and consistent, and doesn't sound strange when you get out of the main coverage area - some of the major factors Sweetwater considers when we're designing live sound systems. Whether you use it as a PA speaker or a stage monitor you can expect tight and powerful lows, rich and detailed mids, and smooth highs from the Milan M15.
Turbosound Milan M15 Powered PA Speaker at a Glance:
- Composite cabinet makes this powerful speaker strong and lightweight
- Flexible input options for virtually any application
- Designed to serve double-duty as a floor monitor too
Composite cabinet makes this powerful speaker strong and lightweight
You'll notice the Milan M15 is remarkably lightweight for a 15-inch PA speaker, at just over 60 pounds. That's due to the cabinet design, which is made from injection-molded polypropylene. And if you look close you'll see a ribbed pattern on the cabinet's exterior (it's actually on the interior as well). That ribbing not only adds strength and rigidity, it also helps cut down on cabinet resonance. Basically, the Milan M15 lets you take advantage of a lighter, stronger design without compromising your sound quality.
Flexible input options and sound shaping for virtually any application
You can connect practically any sound source to the Milan M15, from your mixer's line outputs to instruments and microphones. And you've got two inputs available, so the Milan M15 is a perfectly viable solution for coffee shop performances with a guitar and vocal mic. It's also perfect for public speaking - in fact, there's a Speech/Music mode switch that optimizes the performance for those applications.
Designed to serve double-duty as a floor monitor too
The powerful sound and lightweight design make the Milan M15 an ideal main PA speaker, it's designed to serve you well as a stage monitor too. The trapezoidal design doesn't just make it easy to handle, it also angles the Milan M15 up at you when you place it on the side. Switch on the 100Hz low-cut filter, and now you've got a sweet-sounding floor monitor that won't add rumble to your stage sound.
Turbosound Milan M15 Powered PA Speaker Features:
- Active PA speaker with 15" LF driver and 1,100W Class-D power amp
- Klark Teknik DSP optimizes your sound with dynamic equalization and intelligent limiting
- Specially-designed waveguide gives you wide, consistent coverage with natural off-axis sound
- Bass and Treble EQ controls let you fine-tune your sound
- Dual-angle pole mount socket makes it easy to position for optimum sound coverage
- Injection-molded polypropylene enclosure is strong and lightweight
- Recessed carry handle makes transport and setup easier
- Front-panel LED indicators indicate if a signal is present, when limiting is occurring, and when signal is clipping
Get the Turbosound Milan M15 for powerful sound in a strong, lightweight design | Specification | Detail | | Powered | Yes | | Power Configuration | Bi-amped | | LF Driver Size | 15“ | | LF Driver Power Amp | 1,000W (peak) Class-D | | HF Driver Size | 1“ | | HF Driver Power Amp | 100W (peak) Class-D | | Frequency Range | 45Hz-18kHz (±3dB), 40Hz-20kHz (-10dB) | | Maximum Peak SPL | 130 dB | | Horizontal Coverage Angle | 90 degrees | | Vertical Coverage Angle | 60 degrees | | Enclosure Material | Polypropylene | | Mounting Options | Pole, Floor Wedge, Fly | | Inputs | 2 x XLR/TRS combo | | Outputs | 1 x XLR | | Height | 28.3“ | | Width | 18“ | | Depth | 14.5“ | | Weight | 60.9 lbs. | | Manufacturer Part Number | M15UL |
| Features:
EVS-18K 18-inch Woofer
123 dB max. SPL
400 W Class-D Amplifier
Integrated DSP
Cabinet
Powered subwoofer 1 x 18“, vented design
Maximum Amplifier Output Capability, IHF-A
400 W
Amplifier Power RMS
305 W
Max. SPL 1m / calc.
123 dB
Frequency Range (-10 dB)
40 Hz to 130 Hz
Nominal Coverage Angle
Omnidirectional
Audio Input
XLR and 1/4" TRS combination
Audio Output (LINK OUTPUT)
XLR, balanced
Digital Signal Processing
28/56-Bit, 48 kHz
Crossover Frequency
100 Hz
Product Dimensions (W x H x D)
661 x 507 x 574 mm
Net Weight
31.3 kg
Optional Accessories
---
SH-118A, Dust Cover
F01U270397
User's Manual |
Product Features:
High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
"Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
Ultra-wide dispersion, large-format exponential horn
Additional Line output allows linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
User's Manual
|
Reviews
There are no reviews yet.