| Content |
- 2-way, passive Bass-reflex design
- B&C custom designed 320 mm (12”) neodymium woofer with 75 mm (3”) voice coil
- B&C 25 mm (1”) compression driver with 44 mm (1.7”) voice coil
- 90°H x 60°V constant directivity horn
- 4 x M10 anchoring points, 35 mm ø (1.38”) top-hat for speaker stand placement and wall bracket mount flange, 2 integrated carrying handles
- Enclosure suitable for stacking
- Passive version, 500Wrms/8ohm recommended amplifier
- Passive crossover filter featuring "soft-trip” circuitry to ensure full protection of LF woofer and HF driver
- 2 NL-4 Neutrik™ Speakon connectors
| Code: |
26938 |
| Configuration: |
2 way |
| Recommended amplifier: |
500 W RMS |
| Long Term power: |
250 W |
| Short term power: |
1000 W |
| Nominal impedance: |
8 ohm |
| Frequency response: |
50Hz - 20kHz -6dB |
| Low Frequency woofer: |
1x12 - 3 coil inch |
| High frequency driver: |
1 - 1.7 coil inch |
| Sensitivity (@1W/1m): |
99 dB |
| Maximum SPL cont/peak: |
127/131 dB |
| Dispersion: |
90° x 60° HxV |
| Crossover Frequency: |
1.6 KHz |
| Recommended HP filter: |
45Hz - 24dboct |
| Input connector: |
2 x Speakon |
| Net Dimension (WxHxD): |
407x634x370 - 16x24.9x14.5 mm/inch |
| Net Weight: |
16 / 35.2 kg/lb |
| Transport Dimension (WxHxD): |
495x720x470 - 19.5x28.3x18.5 mm/inch |
| Transport Weight: |
18.5 / 40.8 kg/lb |
|
With the newly designed D12W, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffle by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.
|
Specifications
Frequency Response (-3dB) 58 - 15000 Hz
Frequency Response (-10dB) 48 - 20000 Hz
Sensitivity 1W/1m 97 dB
System Power Handling (continuous/program/peak) 600/1200/2400 Watts
Low Frequency Power Handling (continuous/program/peak) 500/1000/2000 Watts
High Frequency Power Handling (continuous/program/peak) 40/80/160 Watts
LF Transducer DVX3121
HF Transducer ND2
Enclosure Material Polypropylene
Color Black
Outdoor Yes
Speaker Type Fullrange
Weight Net 19.8 kg ( 43.65 lbs )
|
- High-power 2-way PA sound reinforcement speaker system for live and playback applications (200 Watts Continuous / 800 Watts Peak Power)
- Available in black or white finish
- Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
- Extremely powerful 12" long-excursion driver provides incredibly deep bass and acoustic power
- State-of-the-art 1.75'' titanium-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential horn
- Overload-protection circuitry ensures optimal HF driver protection
- Versatile trapezoidal enclosure design allows different positioning:
- -Stand mounting with 35-mm pole socket
- -Tilts on its side for use as a floor monitor
- Optional swiveling mounting brackets
- Ergonomically shaped handles for easy carrying and setup
- 2 professional speaker connectors plus 1⁄4'' jack connectors
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
These loudspeakers take everything musicians love about the original B212 loudspeakers and upgrade them with the same bass and treble/mid transducers found in our wildly popular B212A active version for even better sound and power handling. And with integrated overload protection circuitry, they arrive ready to push it to the limit without putting their high or low frequency drivers in danger.
Triumphant transducers
Every stitch of these loudspeakers is built to deliver, but the fact is that their transducers (woofers and tweeters) are the only part you actually hear. While some manufacturers are okay with putting off-the-shelf transducers in their boxes, we custom-design and build ours from scratch. Not only do we wind our own voice coils, we grow the trees that are processed into the paper pulp that becomes the cones. We even machine the frames and backplates. BEHRINGER's quality is truly under control.
Big sound, lightweight, low price
Big here, small there, lots of this, light on that—everyone's got their preferences, but the EUROLIVE B212XL has proportions we can all agree upon. These loudspeakers pack a clean, punchy wallop (and can handle up to 800 Watts), they are easy to lift by their recessed handles (24 lbs) and are available at insanely low prices. Who wouldn't want to hook up with one of these beauties?
Get on the stick…or get on down
The B212XL is perfect either as part of a PA system or as an onstage monitor. If the situation calls for a PA, mount the speakers on stands via the 35mm pole socket. From there, send a line from the MAIN OUT of a mixer (such as a XENYX 1202FX) to a power amplifier (like the EUROPOWER EP1500). Finally, attach a B212XL to each of the amp's outputs. These loudspeakers have inputs for both professional speaker cable and ¼" cable. Because they have two parallel inputs, you can connect up to two of them to any channel on a power amp.
But these loudspeakers don't have to be confined to an upright position. Just lay them on their sides for use as a floor monitor. You'll find that they tilt to the ideal angle for onstage monitor wedge applications.
Choose white, black, on or off the wall…
You asked for it, and now we're proud to offer these amazing loudspeakers in black or white. We now also make swiveling wall-mount brackets for the B212XL. That means they're ready to fit even more comfortably into a venue's color scheme and layout. No matter what your sound or aesthetic needs may be, we make one that's just right for you! |
With the newly designed D12-3, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust high-performance professional 12" 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12-3 is also ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
Cabinet Full-Range Configuration Passive 3-Way Nominal impedance 8 Ohms Rated power RMS 350 Watts Program power 700 Watts Peak power 1400 Watts SPL 2,83 V / 1m 1W / 8 Ohm 100 dB Max. SPL 1m (calculated) 128 dB Frequency range ( -10dB ) Full range 70 Hz - 20kHz Coverage angle 1 kHz -6dB 120° Conical Coverage angle 10kHz -6dB 90° * 50° Passive crossover frequency 700Hz, 4kHz Voice coil tracking protection Yes Component HIGH Electro-Voice DH-3 Order No. 353 078 Component MID DYNACORD DND 6120 Neodymium Order No. 366 302 Component LOW Electro-Voice DL12BFH Order No. 358 288 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) mm 430 x 586 x 321 Shipping weight 20 kg Net weight 19 kg Enclosure material Heavy Duty Polypropylene Finish Black Grille Powder coated steel, Acoustic foam Handles 1
|
Electro-Voice TX1122 Tour-X 2-Way 12" PA Speaker
The Electro-Voice TX1122 is a high power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required in a lightweight package.
It utilizes the DH3, high output 1.25" titanium compression driver, coupled to a constant directivity 90 degree x 50 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in short to medium throw applications.
The SMX2120 12" woofer has an FEA optimized magnet structure for very low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability.
It has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four-way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1122 to be suspended in a various positions. The recessed input panel with dual NL4 connectors keeps the connectors hidden, while allowing it to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- Freq. response (-3 dB): 60Hz - 20kHz
- Freq. range (-10 dB): 45Hz - 20kHz
- Rec. Hi-pass frequency: 45Hz
- Axial sensitivity: 97dB (1W/1m)
- Max. calculated SPL: 130dB
- Horizontal coverage: 90 degree
- Vertical coverage: 50 degree
- Power handling: 500W continuous, 2000W peak
- LF transducer: SMX2120, 12" (305mm) driver
- HF transducer: DH3, 1.25" (32mm) diaphragm compression driver
- Crossover frequency: 1750Hz
- Nominal impedance: 8 Ohms
- Minimum impedance: 5.4 Ohms
- Connectors: (2) Neutrik Speakon NL4\'s
- Enclosure material: plywood and MDF with EVCoat
- Grille: 16 GA steel, black powdercoat, with rotatable logo
- Suspension: (6) 3/8" threaded points - (2) on each side and (2) on the rear of enclosure
- Dimensions (H x W x D): 24.3" x 15.0" x 15.0" (616mm x 382mm x 380mm)
- Net weight: 44.5lbs (20.2 kg)
- Shipping weight: 50.0lbs (22.7 kg)
|
Reviews
There are no reviews yet.