FBT HIMAXX 40 Passive Speaker 2 way 500W

637.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
2-way, passive Bass-reflex design B&C custom designed 320 mm (12”) neodymium woofer with 75 mm (3”) voice coil B&C 25 mm (1”) compression driver with 44 mm (1.7”) voice coil 90°H x 60°V constant directivity horn 4 x M10 anchoring points, 35 mm ø (1.38”) top-hat for speaker stand placement and wall bracket mount flange, […]

 

Read more

  • 2-way, passive Bass-reflex design
  • B&C custom designed 320 mm (12”) neodymium woofer with 75 mm (3”) voice coil
  • B&C 25 mm (1”) compression driver with 44 mm (1.7”) voice coil
  • 90°H x 60°V constant directivity horn
  • 4 x M10 anchoring points, 35 mm ø (1.38”) top-hat for speaker stand placement and wall bracket mount flange, 2 integrated carrying handles
  • Enclosure suitable for stacking
  • Passive version, 500Wrms/8ohm recommended amplifier
  • Passive crossover filter featuring “soft-trip” circuitry to ensure full protection of LF woofer and HF driver
  • 2 NL-4 Neutrik™ Speakon connectors
Code: 26938
Configuration: 2 way
Recommended amplifier: 500 W RMS
Long Term power: 250 W
Short term power: 1000 W
Nominal impedance: 8 ohm
Frequency response: 50Hz – 20kHz -6dB
Low Frequency woofer: 1×12 – 3 coil inch
High frequency driver: 1 – 1.7 coil inch
Sensitivity (@1W/1m): 99 dB
Maximum SPL cont/peak: 127/131 dB
Dispersion: 90° x 60° HxV
Crossover Frequency: 1.6 KHz
Recommended HP filter: 45Hz – 24dboct
Input connector: 2 x Speakon
Net Dimension (WxHxD): 407x634x370 – 16×24.9×14.5 mm/inch
Net Weight: 16 / 35.2 kg/lb
Transport Dimension (WxHxD): 495x720x470 – 19.5×28.3×18.5 mm/inch
Transport Weight: 18.5 / 40.8 kg/lb
Weight 19.00 kg

Reviews

There are no reviews yet.

Be the first to review “FBT HIMAXX 40 Passive Speaker 2 way 500W”

Your email address will not be published. Required fields are marked *

Quick Comparison

FBT HIMAXX 40 Passive Speaker 2 way 500W removeELECTRO VOICE ZX3-90B SPEAKER 2 WAY 600W removeTOA HS-120B Coaxial Array Speaker System removeDYNACORD VariLine VL212 Fullrange 2-Way Speaker 800 Watts removeELECTRO VOICE ZX3 60B SPEAKER 2 WAY 600W removeELECTRO VOICE sx 300E TWO-WAY 300 watt -BLACK- remove
NameFBT HIMAXX 40 Passive Speaker 2 way 500W removeELECTRO VOICE ZX3-90B SPEAKER 2 WAY 600W removeTOA HS-120B Coaxial Array Speaker System removeDYNACORD VariLine VL212 Fullrange 2-Way Speaker 800 Watts removeELECTRO VOICE ZX3 60B SPEAKER 2 WAY 600W removeELECTRO VOICE sx 300E TWO-WAY 300 watt -BLACK- remove
Image
SKUFBT00010001978HS-120BE009315001974001894
Rating
Price 637.00 incl. GR VAT 920.00 incl. GR VAT 326.00 incl. GR VAT 3,947.00 incl. GR VAT 920.00 incl. GR VAT 495.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • 2-way, passive Bass-reflex design
  • B&C custom designed 320 mm (12”) neodymium woofer with 75 mm (3”) voice coil
  • B&C 25 mm (1”) compression driver with 44 mm (1.7”) voice coil
  • 90°H x 60°V constant directivity horn
  • 4 x M10 anchoring points, 35 mm ø (1.38”) top-hat for speaker stand placement and wall bracket mount flange, 2 integrated carrying handles
  • Enclosure suitable for stacking
  • Passive version, 500Wrms/8ohm recommended amplifier
  • Passive crossover filter featuring "soft-trip” circuitry to ensure full protection of LF woofer and HF driver
  • 2 NL-4 Neutrik™ Speakon connectors
Code: 26938
Configuration: 2 way
Recommended amplifier: 500 W RMS
Long Term power: 250 W
Short term power: 1000 W
Nominal impedance: 8 ohm
Frequency response: 50Hz - 20kHz -6dB
Low Frequency woofer: 1x12 - 3 coil inch
High frequency driver: 1 - 1.7 coil inch
Sensitivity (@1W/1m): 99 dB
Maximum SPL cont/peak: 127/131 dB
Dispersion: 90° x 60° HxV
Crossover Frequency: 1.6 KHz
Recommended HP filter: 45Hz - 24dboct
Input connector: 2 x Speakon
Net Dimension (WxHxD): 407x634x370 - 16x24.9x14.5 mm/inch
Net Weight: 16 / 35.2 kg/lb
Transport Dimension (WxHxD): 495x720x470 - 19.5x28.3x18.5 mm/inch
Transport Weight: 18.5 / 40.8 kg/lb

12-inch Two-Way Passive 90 x 50, 600W Loudspeaker System

  • DVX3121 12 LF Transducer with Forced Air Cooling ND2 2 Voice Coil, 1 Exit Neodymium Compression Driver 90 x 50 Coverage Pattern 600W Continuous (2400W Peak) Power Handling High Sensitivity, 131 dB Maximum SPL Adjustable Monitor Angle (45 or 55) 2 Anchor Plates for Single Stud Fittings and 7 Integral Suspension Points Available in Black or White Passive/Biamp Selectable Full Line of AccessoriesThe Electro-Voice Zx3 is the new standard of no compromise audioperformance and versatility in a simple to use, compact package.At its heart are the transducers. First is the DVX3121 high performancelow frequency transducer. EV used advanced computer aided designtechniques to create forced air, directional voice coil cooling for highpower and efficiency. Finite element analysis was used to optimize thesuspension and magnetic structure for long, linear travel to provide lowdistortion and greater LF extension. These features and details, suchas forged magnetic components and special materials, provide reliabilitywith a 500W power rating in a lightweight transducer. Next is theND2, a 2-inch voice coil compression driver based on neodymium motorstructure to allow for maximum output while reducing size and weight toa minimum. Its precision phasing plug and titanium diaphragm providebetter HF performance, while the integral heatsink provides cooling forhigh power output.The high tech enclosure uses injection-molded high-impact polypropylenestructural foam to make the Zx3 incredibly durable. The enclosuregeometry elements have been carefully designed to provide maximumrigidity and bass response. By design the Zx3 is also a perfect solutionfor stage monitors by allowing two angles (45 or 55) without any additionalaccessories.Two coverage patterns are available; 60 x 60 coverage for long-throwand cluster applications, 90 x 50 coverage for wider coverage or shorterdistances.The Zx3 is equipped with two anchor plates for rigging with single studfittings,along with two more possible anchor plate attachment points onthe bottom. For permanent suspension or attaching brackets, the Zx3also has two M8 inserts on the top and bottom, two under the handle,and one on the back of the enclosure, for a total of 7. All versions areavailable in black or white.
  • Freq. Response1 (-3 dB): 58 Hz - 15 kHz
  • Freq. Range1 (-10 dB): 48 Hz - 20 kHz
  • Rec. Hipass Frequency: 50 Hz
  • Axial Sensitivity1: 97 dB (1W/1m)
  • Max. Calculated SPL: 131 dB
  • Horizontal Coverage: 90
  • Vertical Coverage: 50
  • Power Handling (Passive): 600W Continuous, 2400W Peak
  • LF Power Handling (Biamp): 500W Continuous, 2000W Peak
  • HF Power Handling (Biamp): 40W Continuous, 160W Peak
  • LF Transducer: DVX3121, 12 in (305mm) Driver
  • HF Transducer: ND2, 1 in (25.4mm) exit Neodymium
  • Compression Driver
  • Crossover Frequency: 2 kHz
  • Nominal Impedance: 8 Ohms
  • Minimum Impedance: 6.2 Ohms
  • Connectors: (2) Neutrik Speakon NL4s
  • Enclosure Material: Polypropylene Structural Foam
  • Suspension: Enclosure has locations for 4 Single-Stud
  • Attachment Plates and 10 Forged Steel
  • Eyebolts - 2 on Top, 2 on Bottom, 2 on
  • Side, and 1 on Rear of Enclosure
  • Grille: Polyester Powder Coated, 16GA
  • Galvanized Steel, with Rotatable Logo
  • Dimensions (H x W x D): 613mm x 397mm x 362mm: (24.14 x 15.64 x 14.26)
  • Net Weight: 19.8 kg (43.7 lbs)
  • Shipping Weight: 22.1 kg (48.6 lbs)

Hχείο 2 δρόμων με ομοαξονική διάταξη των tweeters (array), woofer 12“, tweeter 6 X 0,5“, 300W program, 8Ω, διασπορά 90° X 40°, απόκριση συχνότητας 80Hz-20kHz, 97dBSPL/1W/1M, Καμπίνα πολυπροπυλενίου, weather resistant, μαύρο χρώμα, (361 (W) Χ 448 (H) Χ 320 (D)mm). Βάρος 8,5 Kg.

The DYNACORD VL212 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications. The VL212 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two rugged DND 12350 transducers are used. The in-line topology guarantees excellent pattern control even for the low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL212 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations. The VL212 can be used as a general purpose stand-alone fullrange cabinet and as a satellite or delayed system cabinet in larger set ups.

Order No. D 113 133 Cabinet Full-Range Configuration Passive 2-Way Switchable to biamped mode Nominal impedance 4 Ohms Rated power RMS 800 Watts Program power 1600 Watts Peak power 3200 Watts SPL 2,83 V / 1m 2W / 4 Ohm 105 dB Max. SPL 1m (calculated with peak power) 137dB Frequency range ( -10dB ) Full range 80Hz - 19kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 50Hz - 19kHz Coverage angle 1 kHz -6dB 90° * 45° Passive crossover frequency 1.5kHz Active crossover frequency 1.5kHz 24dB/Oct. Linkwitz-Riley, 1,5kHz Linear-Phase FIR Voice coil tracking protection Yes Component HIGH Electro-Voice ND6-8 Neodymium Order No. 361493 Component LOW 2 x DND 12350 Order No. 366559 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connectors Biamped Lo 1+, 1- Hi 2+, 2- Wired through 1+, 1-, 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) 385x1035x374mm Shipping weight kg Net weight 34kg Enclosure material Birch plywood Finish Black, 2-component paint Grille Powder coated steel, acoustic foam Handles 2

Electro-Voice ZX3-60B - 600-Watt, 12” two-way loudspeaker system, bi-amp or passive, 60 X 60 horn, integral stand mount, Neutrik Speakon, Black

This item is BLACK.

The Electro-Voice ZX3-60B is a 2-way P.A. passive loudspeaker with a 600-watt continuous power handling capacity and a 60x60° coverage angle, for long-throw and cluster applications. The high-tech, high-impact polypropylene enclosure houses a 12" woofer and a 1" Neodymium compression driver with a large 2" voice-coil.
The ZX3-60B cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker.

• 2-way 600-watt suspension P.A. speaker with 60x60° coverage for long-throw and cluster applications
• High output, 131dB SPL capacity
• Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor
• 12" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil
• Rugged, high-tech polypropylene enclosure
• 3 suspension Anchor Plates, 10 M8 insert suspension points Additional Information on the ZX3-60B

 Active or Passive   Passive
 Frequency Response -10dB:48-20,000Hz
 Power Capacity 600W
 Maximum Sound Pressure Level (SPL) 131dB
 Nominal Sensitivity 97dB
 Impedance 8 Ohms
 Crossover 2KHz
 Low Frequency Driver DVX3121, 12" (305mm) Driver
 High Frequency Driver ND2, 1" (25.4mm) exit Neodymium
 Enclosure Material Polypropylene Structural Foam
 Input Connections Neutrik Speakon NL4\'s x 2
 Mounting Options Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure
 Dimensions 24.14 x 15.64 x 14.26" (613 x 397 x 362mm)
 Weight 43.7 lbs (19.8 kg)

Chassis Size    304.8 mm (12“)
Color    Black
Color    White
Directivity Index    11.1 dB
Input Connections    Four-pin Speakon (2)
Speaker Type    Fullrange
Speaker Type    Mid-High
Speaker Type    Two-Way
Frequency Response (-10 dB)    50 - 20000 Hz
Internal Crossover    Yes
Sensitivity 1 W/1 m    99 dB
Max. SPL/1m (calc)    131 dB
Coverage
(Nominal -6 dB) H°    65 °
Coverage
(Nominal -6 dB) V°    65 °
System Power Handling (Continuous/Program/Peak)    300 Watts
LF Transducer    DL12BFH
HF Transducer    DH2010
Crossover Frequency    1500 Hz
Nominal Impedance (Passive)    8 Ω
Minimum Impedance    6 Ω
Flying    Yes
Outdoor    No
Height    586 mm (23.07“)
Width    429 mm (16.89“)
Depth    312 mm (12.28“)
Weight Net    14.5 kg (31.97 lbs)

Weight19.00 kg19.80 kg8.50 kg24.00 kg19.80 kg14.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 19.00 kg
Weight 19.80 kg
Weight 8.50 kg
Weight 24.00 kg
Weight 19.80 kg
Weight 14.50 kg