Content |
- 2-way, passive Bass- Reflex design
- B&C custom designed 380 mm (15”) neodymium woofer with 75 mm (3”) voice coil
- B&C 36 mm (1.4”) compression driver with 64 mm (2.5”) voice coil
- 90°H x 60°V constant directivity horn
- 4 x M10 anchoring points, 35 mm ø (1.38”) top-hat for speaker stand placement and wall bracket mount flange, 2 integrated carrying handles
- Passive version, 700Wrms/8ohm recommended amplifier
- Passive crossover filter featuring "soft-trip” circuitry to ensure full protection of LF woofer and HF driver
- 2 NL-4 Neutrik™ Speakon connectors
Code: |
29798 |
Configuration: |
2 way |
Recommended amplifier: |
700 W RMS |
Long Term power: |
350 W |
Short term power: |
1400 W |
Nominal impedance: |
8 ohm |
Frequency response: |
40Hz - 20kHz -6dB |
Low Frequency woofer: |
1x15 - 3 coil inch |
High frequency driver: |
1.4 - 2.5 coil inch |
Sensitivity (@1W/1m): |
99 dB |
Maximum SPL cont/peak: |
129/132 dB |
Dispersion: |
90° x 60° HxV |
Crossover Frequency: |
1.3 KHz |
Recommended HP filter: |
35Hz - 24dboct |
Input connector: |
2 x Speakon |
Net Dimension (WxHxD): |
482x757x427 - 19x29.8x16.8 mm/inch |
Net Weight: |
26 / 57.3 kg/lb |
Transport Dimension (WxHxD): |
520x867x600 - 20.4x34.1x23.6 mm/inch |
Transport Weight: |
28.5 / 62.8 kg/lb |
|
The Zx5 is a 15-inch, 2-way cabinet with the most elegant high-impact composite enclosure, featuring the newest generation of EV components: the all-new DXV3150, 500W, 15-inch woofer and the all-new 2-inch neodymium ND2 compression driver. The Zx5 is rated for 600 watts long-term power handling and is able of producing high SPLs whilst providing a very smooth frequency response. With two available coverage patterns (60-degrees x 60-degrees or 90-degrees x 50-degrees), two adjustable monitor angles (45- or 55-degrees) and ten built-in rigging and suspension points allowing for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies. Specifications Frequency Response (-3dB) 52 - 16000 Hz Recommended High-Pass Frequency 36 Hz Sensitivity 1W/1m 98 dB Max. SPL / 1m (calc); full space 132 dB Coverage (nominal -6dB) H° 60 ° Coverage (nominal -6dB) V° 60 ° System Power Handling (continuous/program/peak) 600/1200/2400 Watts Crossover Frequency 1500 Hz Nominal Impedance (Passive) 8 Ohms Minimum Impedance 6.5 Ohms Input Connections Four-pin Speakon (2) Chassis Size 15 inches Weight Net 22.5 kg ( 49.6 lbs ) Dimensions (HxWxD) 692 x 446 x 411 mm (27.24" x 17.56" x 16.18 |
Ειδική έκδοση του AM 7315/95 για χρήση σε
εξωτερικό περιβάλλον και ακραίες καιρικές
συνθήκες με επιπλέον αναβάθμιση 14 σημειων.
Πιστοποίηση IP56 κατά πρότυπο IEC 529.
Παράδοση κατόπιν παραγγελίας.
Frequency Range : 38 Hz - 19 kHz (-10 dB)
Frequency Response : 45 Hz - 17 kHz ( ± 3 dB)
Coverage Pattern : 90°x 50°, rotatable waveguide
Directivity Factor (Q) : 10
Directivity Index (DI) : 10 dB
Crossover Modes : Tri-amp / Bi-amp switchable
Passive Crossover Slopes : MF/HF Section in Bi-amp mode: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.1 kHz
Transducer Power Rating (AES) : LF: 1000 W (4000 W peak), 2 hrs
600 W (2400 W peak), 100 hrs
MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2hrs
Long-Term System Power Rating (IEC) : LF: 600 W (2400 W peak), 100 hrs
MF/HF: 350 W (1400 W peak), 100 hrs
Maximum SPL : LF: 125 dB-SPL cont avg
(131 dB peak)
Tri-amp mode:
MF: 133 dB-SPL cont avg
(139 dB peak)
HF: 132 dB-SPL cont avg
(138 dB peak)
Bi-amp mode:
MF/HF: 132 dB-SPL cont avg
(138 dB peak)
System Sensitivity of Passive Sections 6 : MF/HF Section in Bi-amp mode: 108 dB SPL (1W @ 1m)
|
Large (15“) diameter woofer in a compact, lightweight enclosure.
Compact dimensions made possible by mounting the high frequency driver array in a coaxial configuration with the woofer.
Available in black or white and 100V line models
Extended bass frequencies for rich music reproduction.
The world's smallest* enclosure size relative to the diameter of the woofer.
Easy to transport thanks to compact and light enclosures that other speakers of this class cannot offer.
Product Specifications - Enclosure: Sealed type
- Power Handling Capacity: Continuous pink noise: 100 W, Continuous program: 300 W
- Rated Impedance: 8 Ω
- Sensitivity: 98 dB (1 W, 1 m)
- Frequency Response: 70 - 20,000 Hz
- Crossover Frequency: 3 kHz
- Directivity Angle: Horizontal: 90゜, Vertical: 40゜
- Speaker Component: Low frequency: 38 cm (15) cone-type
- Input Terminal: NEUTRIK NL4MP Speakon and M4 screw terminal, distance between barriers: 9 mm (0.35)“
- Operating Temperature: -10℃ to +50℃ (14゜F to 122゜F)
- Finish: Enclosure: Polypropylene, black
- Punched net: Surface-treated steel plate, black
- Dimensions: 451 (W) × 560 (H) × 400 (D) mm (17.76 × 22.05" × 15.75“)“
- Weight: 12 kg (26.46 lb)
| The P3115-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high-frequency section is a constant directivity CMD horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 15” woofer with a 2.5” voice coil. The P3115-T features a selectable line transformer for 70 - 100 Volt applications. P 3115-T meets the requirements of IP 55 code (International Protection Rating).
- Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
- Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
- Stainless steel bracket
- 15" high-output LF transducer with 2" voice coil
- RCF Precision Neo 1" Compression Driver with 1.5" voice coil
- 90° x 60° constant directivity horn
- 10° X 20° enclosure sides for array configurations
- Active Mosfet Compression Driver Protection
- 12 brass suspension points (M10)
- Line transformer
Acoustical Specifications
- Frequency Response -10 dB: 75 Hz ÷ 20 kHz
- Max SPL @ 1m: 129 dB
- Horizontal coverage angle: 90°
- Vertical coverage angle: 60°
- Directivity index; Q: 13.3
- System Sensitivity: 98 dB
- Nominal Impedance: 16 Ω
- Power Handling: 300 W
- Peak Power Handling: 1200 W
- Protections: dinamyc
- Crossover frequencies: 1300 Hz
Transducers
- Compression Driver: 1" HF driver, 1.5" voice coil
- Nominal Impedance: 8 Ω
- Input Power Rating: 25 W AES
- Sensitivity: 108 dB
- Woofer: 15" woofer, 2.5" voice coil
- Nominal Impedance: 16 Ω
- Input Power Rating: 250 W AES
- Sensitivity: 98 dB
Input Section
- Input connector: 4-adriges Neopren Kabel, 5m
- Constant voltage transformer: 70/100 V
- Power Selection: 70V/60W, 30W , 100V/120W, 60W
Cabinet
- Cabinet Material: Polyethylene rotomoulded
- Hardware: 12 x M10 inserts+ U-brackets and pair of spacers
- Grille: Custom perforated aluminium grillewith open-cell fiber and water repellent woven fabric backing
- Colour: grey
Physical Specifications
- Height: 463 / 18.22 mm/inch
- Width: 463 / 18.22 mm/inch
- Depth: 433 / 17.04 mm/inch
- Net Weight: 19.4 / 42.76 kg/lbs
|
Description:
The SX18 is a switchable 3 way active, 2 way passive, arrayable loudspeaker. Designed to be used as the main enclosure for small to mid-sized venues or as a supplemental cabinet for large scale sound reinforcement, this enclosure provides high sound pressure levels in a small, lightweight package. Adamson?s Proprietary Kevlar drivers and internal crossovers are employed throughout the SX18 enclosure and its integral fly hardware makes installation of the product fast and effective. Moving the SX18 is easy and efficient with the supplied dolly board. A flexible, high powered enclosure, the SX18 is suited for a wide variety of applications.
Applications:
Live Concert Reproduction
Side Fill Monitoring
Near Field Applications
Theatres
Houses of worship
Dance Clubs
Features:
Kevlar 18" bass and 10" midrange Drivers
1.5" High Frequency Compression Driver
2-Way Bi-Amp/3-Way Tri-amp Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points
Supplied Dolly Board
Durable, Dual Component Finish
Honeycomb Punched, Steel Grille
Roadworthy Construction
Weight: 67 kg
|
Reviews
There are no reviews yet.