Content | D&R's newest Telephone Hybrid-1 is an interface between a standard telephone line and a mixing console. Its purpose is to enable to record or broadcast a conversation between a caller and a presenter in an easy way.
Superb audio separation between in and outgoing signals are achieved by carefully designed internal circuitry. It is a problem solver for changing two wire communication into a four wire system with separate in and outputs.
Telephone hybrids provide the interface between professional audio equipment and the public telephone network.
They provide protection for your equipment and the public telephone lines, allowing for varying line signals and line conditions. Automatically canceling out the unwanted signal they also facilitate two-way communication down a single telephone line.
Each hybrid has a telephone line connection, a handset connection and separate connectors for audio input and output from a broadcast mixer, or other professional audio source.
A large proportion of D&R hybrids are used in radio and television broadcasting applications allowing external callers to be connected to the studio mixing console. Most of the other units are supplied to communication operations allowing extremely effective conversion between 4-wire audio circuits and standard telephone lines.
Specification
Output: balanced mic level -20dB. Input: Line level 0 dBu balanced. R/C balance: fully adjustable separation to more than 30dB.
C-BALANCE :12 pole rotary switch to select the optimum side tone attenuation.
R-BALANCE: Internal potentiometer to adjust for optimum side tone attenuation.
TO CALLER: Switch to temporarily connect the line (wall) connector to the Phone connector (appliance) to be able to dial and make a connection.
ON-LINE CONNECT: Line connect switch to connect and disconnect calls from the telephone line |
Features Four Independent Compressor Channels Channels 1 and 2, 3 and 4 are stereo linkable 7 LED Gain Reduction metering Balanced XLR Inputs and Outputs Sidechain Insert points Intuitive, user friendly layout Flawless performance The sheer amount of effects and signal processors necessary for today's standards of audio production puts a great strain on the available space in equipment racks, both in the studio and on the road.So, ARX would like to introduce the ARX Quadcomp. An all-new upgrade of the classic award-winning ARX Quadcomp?, the very first four channel 1 RU compressor.You?ll notice that we haven?t strayed very far from our original design concept. The Quadcomp is still four variable ratio Compressor/ Limiters neatly housed in a compact all steel 1 RU package. However, all new low noise/low distortion circuitry, better metering plus XLR inputs and outputs put the Quadcomp in a class of its own. More Control, Less Space On the front panel, each channel has the 'industry standard' individual controls for Threshold, Compression Ratio and Output, plus a new 7 LED Gain Reduction display for accurate visual indication of the amount of gain reduction being applied to the program, and an IN/OUT hardwire bypass switch.In addition to this, each channel has a blank numbered panel to write on for easy confirmation of compressor assigns. Precision Circuitry Internally, each compressor uses Class A VCAs and true 2 pole averaging RMS/DC converters for low distortion and accuracy, plus program dependent attack and release time, which automatically determines optimum compressor response. Balanced Inputs and Outputs The rear panel has true differential Balanced XLR Inputs and Outputs for each compressor. Each compressor has a TRS jack Sidechain access insert point, for frequency sensitive compression, De-essing, etc. in conjunction with an external equalizer (such as the ARX EQ260). Compressor pairs 1 and 2, 3 and 4 also have rear panel mounted Stereo Link switches for accurate stereo tracking. When switched IN, the first channel becomes the master and controls all the functions of the second except Output gain. Universal AC Power AC power range is switchable 100 to 120V, or 220 to 240V, and is connected to the unit via a standard IEC connector, with built-in fuse and voltage switch. Whatever the application ? Channel insert, Bus insert, Master Outputs, Monitor outputs, Crossover outputs, the Quadcomp II?s unique High Density design, precision Low Noise circuitry and clean uncluttered layout make it a truly useful audio tool for all applications.
T E C H N I C A L S P E C I F I C A T I O N S Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms Input Headroom + 20dB CMRR >50dB, 20 Hz?20 KHz Output Impedance Balanced 300 ohms Unbalanced 150 ohms Output Level (Max) + 20 dB Frequency Response 20Hz-20KHz ±0.5dB Signal to Noise ratio -93 dB Unweighted, -98 dB ?A? weighted Distortion .015% THD @ 0dB,1KHz Dynamic Range 108 dB Attack and Release Times Program dependent Metering 7 LED display: ?1, 2, 3, 6, 12, 18, ?24 dB Sidechain Insert Impedance 10 Kohm Power Requirements 100/120 V AC or 220/240 V AC Weight 5 lbs/2.2 Kg Dimensions 19“W x 1?“H x 6“D, 482 x 44 x 155mm Input Connector type Balanced XLR Output Connector type Balanced XLR Sidechain Insert Connector TRS Jack
Front Panel Controls Hardwire bypass IN/OUT switch Threshold, Ratio and Output Gain controls 7 LED Gain Reduction display Marker panel for labelling compressor assigns Stereo link status LEDs Rear Panel Connectors Input and Output balanced XLR connectors TipRingSleeve Sidechain insert connectors Channels 1 and 2, 3 and 4 Stereo link switches IEC AC mains connector with inbuilt fuse and voltage change | SHARK FBQ100
Automatic Feedback Destroyer with Integrated Microphone Preamp, Delay Line, Noise Gate and Compressor
High performance single channel Feedback Destroyer with integrated microphone preamp, delay line, noise gate and compressor
Automatically and "intelligently" locates and destroys up to 8 feedback frequencies
Narrow FBQ filters for extremely effective feedback suppression, while keeping highest sonic quality
Ultra-low noise Mic/Line input with Gain control and +48 V phantom power
Delay line with up to 2.5 seconds of delay, adjustable in meters, feet and msec
Noise gate with automatic and manual parameter settings
Automatic compressor with variable density
Subsonic filter with adjustable cut-off frequency
Balanced inputs and servo-balanced outputs with ¼'' TRS and gold-plated XLR connectors
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany |
Shure DP11EQE Dynamics Processor Specification:
GENERAL:
Frequency Response: 20 to 20k Hz +/- 1.0 dB re 1 kHz
Dynamic Range: 104 dB minimum, A-weighted, 20 Hz to 20 kHz
Sampling Rate: 48 kHz
Digital-to-Analog, Analog-to-Digital Conversion: 20 bit resolution
Voltage Gain:
1 dB +/- 1dB (power off)
12 dB +/- 2 dB (input 10 dBV, output +4 dBu)
12 dB +/- 2 dB (input +4 dBu, output 10 dBv)
0 dB +/- 2 dB (equal input and output sensitivities)
Impedance:
Input: 47 kilohms +/- 20% actual
Output: 120 ohms +/- 20% actual
Input Clipping Level
+18 dBu minimum (at +4 dBu setting)
+6 dBV minimum (at 10 dBV setting)
Output Clipping Level
+18 dBu minimum (at +4 dBu setting)
+6 dBV minimum (at 10 dBV setting)
Total Harmonic Distortion
LED Signal Indicators
Signal: 40 dB
Clip: 6 dB down from input clipping
Propagation Delay from Input to Ouput
0.8 ms (all filters flat, no dynamics processing, 0 ms delay), up to 2.1 ms (all processing enabled)
Polarity
Input to output: inverting optional (default: non-inverting)
XLR: pin 2 positive with respect to pin 3
1/4-inch TRS: tip positive with respect to ring
Operating Voltage
DP11EQ: 120 Vac, 50/60 Hz, 50 mA max
DP11EQE: 230 Vac, 50/60 Hz, 25 mA max
DP11EQJ: 100 Vac, 50/60 Hz, 50 mA max
Temperature Range
Operating: 0 degrees to 60 degrees C (32 degrees to 140 degrees F)
Fuse
DP11EQ: 120 Vac. Fuse: 100 mA, 250V time delay
DP11EQE: 230 Vac. Fuse: 50 mA, 250 V time delay
DP11EQJ: 100 Vac. Fuse: 100 mA, 250 V time delay
Dimensions
219 mm x 137 mm x 44 mm (8-5/8 in x 5-3/8 in x 1-3/4 in)
Weight: 930 g (2.05 lbs)
DYNAMICS PROCESSOR
Gate and Expander:
Threshold: 72 to 1 dB, 0.5 dB resolution
Attack: 1.0 to 200 ms
Decay: 0.05 to 1 second
Gate Hold Time: 0 to 0.5 seconds
AGC Leveler
Threshold: 72 to 1 dB, 0.5 dB resolution
Attack: 0.2 to 3 seconds
Decay: 0.5 to 5 seconds
Hinge: Threshold to 1 dB, 0.5 dB resolution
Compressor and Limiter
Threshold: 72 to 1 dB, 0.5 dB resolution
Attack: 1.0 to 200 ms
Decay: 0.05 to 1 second
Knee: Hard or Soft selectable
No Overshoot Peak Limiter
Propagation delay: 1 ms
Threshold: 72 to 1 dB, 0.5 dB resolution
Attack: 0 msDecay: 100 ms
PARAMETRIC EQUALIZER
Parametric Filter Frequency Bands
Up to 9 bands, variable frequency, variable Q
Boost/Cut Range
+6 dB to 18 dB per band
Q Range
1/40-octave to 2 octave
High and Low Shelf/Cut Filters
Shelf, +6 to 18 dB per filter
Cut, 12 dB per octave nominal
DELAY
Up to 1.3 seconds, 21 microsecond resolution
|
Interactive Reference-Class 2-Channel Expander/Gate/Compressor/ Peak Limiter with
Integrated De-Esser, Dynamic Enhancer, Tube Simulation and Low Contour Filter
Whether you?re recording, mixing or mastering, the COMPOSER PRO-XL MDX2600
gives you total dynamic control. It includes all of the features you would expect from
a reference class compressor?plus a voice-adaptive de-esser, a new dynamic
enhancer, authentic tube emulation and much more. These are some of the indispensable
tools for producing clean, consistent audio with virtually no loss in signal quality.
Features:
Switchable IKA (Interactive Knee Adaptation) program-adaptive compression circuitry
combines the advantages of hard-knee and soft-knee characteristics
Integrated de-esser with switchable male/female voice recognition removes excessive
sibilance from your vocal tracks
IGC (Interactive Gain Control) peak limiting circuitry combines clipper and program
limiter for reliable and inaudible protection against signal peaks
Switchable dynamic enhancer for brilliant, lively audio even with heavy compression
IRC (Interactive Ratio Control) expander/gate circuitry for virtually inaudible
noise suppression
Switchable tube simulation for the extra warmth and transparency of classic
tube circuitry
Automatically or manually adjustable attack and release times
Switchable low contour filter prevents "pumping" due to low-frequency
dominated compression
Stereo couple function with independent output level settings
Switchable side chain input with side chain monitor function
Ultra low-noise 4580 operational amplifiers and state-of-the-art THAT¬ VCA's
Separate 12-segment LED meters for input/output levels and gain reduction
Dedicated "traffic light" threshold and de-esser level displays
High-quality detented ALPS¬ potentiometers and illuminated switches
Servo-balanced inputs and outputs with ? in. TRS and gold-plated XLR
connectors
Relay-controlled hard bypass switch with auto bypass function in case
of power failure
Manufactured under ISO9000 certified management system
|
Description
The alphaton Feedback-Controller FC-100 is a revolutionary product for every microphone application including wireless types. It can provide effective feedback control to any sound reinforcement situation. It can also eliminated string feedback in guitars and bass instruments which are equipped with piezo or condenser pickups. The FC-100 provides 6 to 10 dB of feedback protection by analysing the incoming signal, detecting the presence of feedback and then notching out the feedback frequency. The FC-100 relieves the sound engineer automatically. It works dynamically and eliminates a feedback signal before it can grow into a peak. Internally a discriminator circuit detects the presence of regenerative feedback and triggers the automatic equaliser to insert a notch where the feedback peak is coming up. This normally prevents other peaks from developing but if they do, the process is repeated at high speed, thus keeping feedback under control.
Technical Data In- and Outputs transformer balanced max. Inputlevel + 3 dB Gain (RS=200 Ohm, RL=2kOhm) 0 dB Frequency Response 20 Hz ... 20 kHz, +/- 1,5 dB Feeback Cancellation 6 ... 10 dB Power Requirement 30 ... 48 V Phantom Current drain ca. 8 mA External Power Supply 9 ... 20 V DC, 3,5 mm jack, tip + Housing Aluminium Diecast Weight 285 grams Dimensions 112 x 60 x 32 mm |
Reviews
There are no reviews yet.