INTERM QD-4240 AMPLIFIER 4X60W

717.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Power Output Level: QD4240                      8ohm (Quad Ch)      40W      4ohm (Quad Ch)      60W                                                           8ohm bridged mono 120W Input Sensitivity (8ohm, 1kHz)  0.775Vrms Input Impedance 20kohm Balanced  Slew Rate (8ohm, Full Swing) ±30V/?sec Frequency Response (±0.5dB) 20kHz ~ 50kHz  T.H.D. (f=20Hz~20kHz, Half Power) 0.03%  Signal to Noise Ratio 105dB Damping Factor (8ohm, 1kHz)  100 Rasidual Noise  -85dB Channel […]

 

Read more

Power Output Level: QD4240                     

8ohm (Quad Ch)      40W     
4ohm (Quad Ch)      60W                                                          

8ohm bridged mono 120W

Input Sensitivity (8ohm, 1kHz)  0.775Vrms
Input Impedance 20kohm Balanced 
Slew Rate (8ohm, Full Swing) ±30V/?sec
Frequency Response (±0.5dB) 20kHz ~ 50kHz 
T.H.D. (f=20Hz~20kHz, Half Power) 0.03% 
Signal to Noise Ratio 105dB
Damping Factor (8ohm, 1kHz)  100
Rasidual Noise  -85dB
Channel Separation (8ohm, 1kHz)  80dB
Voltage Gain (4ohm)  26dB 29dB 32dB
Power Source  100-120VAC or 220-240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
Power Consumption  300W 420W 770W
Weight  11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb
Dimensions  482(W) x 88(H) x 369(D) mm
/19(W) x 3.5(H) x 14.5(D) in

Weight 11.50 kg

Reviews

There are no reviews yet.

Be the first to review “INTERM QD-4240 AMPLIFIER 4X60W”

Your email address will not be published. Required fields are marked *

Quick Comparison

INTERM QD-4240 AMPLIFIER 4X60W removeELECTRO VOICE CPS4.5 Contractor Precision Series 4-ch. Amplifier removeRAM AUDIO S-4004 Power Amplifier 4x980 Watts removeELECTRO VOICE CPS4.10 4-channel Class-D amplifier slot f. optional RCM810 remote module 4 x 1000 W removeLAB GRUPPEN C 16-4 Power Amplifier 4x400 Watts removeRAM AUDIO T-1208 Power Amplifier 8x150 Watts remove
NameINTERM QD-4240 AMPLIFIER 4X60W removeELECTRO VOICE CPS4.5 Contractor Precision Series 4-ch. Amplifier removeRAM AUDIO S-4004 Power Amplifier 4x980 Watts removeELECTRO VOICE CPS4.10 4-channel Class-D amplifier slot f. optional RCM810 remote module 4 x 1000 W removeLAB GRUPPEN C 16-4 Power Amplifier 4x400 Watts removeRAM AUDIO T-1208 Power Amplifier 8x150 Watts remove
Image
SKUQD-4240004383S-4004CPS 4.10C16-4T-1208
Rating
Price 717.00 incl. GR VAT2,294.00 incl. GR VAT 1,920.75 incl. GR VAT2,740.09 incl. GR VAT 3,162.00 incl. GR VAT 1,044.57 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityIn stockAvailable on backorderAvailable on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Power Output Level: QD4240                     

8ohm (Quad Ch)      40W     
4ohm (Quad Ch)      60W                                                          

8ohm bridged mono 120W

Input Sensitivity (8ohm, 1kHz)  0.775Vrms
Input Impedance 20kohm Balanced 
Slew Rate (8ohm, Full Swing) ±30V/?sec
Frequency Response (±0.5dB) 20kHz ~ 50kHz 
T.H.D. (f=20Hz~20kHz, Half Power) 0.03% 
Signal to Noise Ratio 105dB
Damping Factor (8ohm, 1kHz)  100
Rasidual Noise  -85dB
Channel Separation (8ohm, 1kHz)  80dB
Voltage Gain (4ohm)  26dB 29dB 32dB
Power Source  100-120VAC or 220-240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
Power Consumption  300W 420W 770W
Weight  11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb
Dimensions  482(W) x 88(H) x 369(D) mm
/19(W) x 3.5(H) x 14.5(D) in

mplifier Gain 32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
Analog Inputs 4, electronically balanced, Phoenix-type
Audio Network No
CAN Bus Interface Yes (With Optional RCM-810 Card)
Continuous Rated Power
(1 kHz, THD 1%) 100v 500 Watts
Continuous Rated Power
(1 kHz, THD 1%) 2Ω 500 Watts
Continuous Rated Power
(1 kHz, THD 1%) 4Ω 500 Watts
Continuous Rated Power
(1 kHz, THD 1%) 70v 500 Watts
Continuous Rated Power
(1 kHz, THD 1%) 8Ω 250 Watts
Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Cooling Front-to-Rear, continuously variable fans
DIM 30 0.02 %
Electronics Type Amplifier
Frequency Response 15 Hz-30 kHz
Input Impedance (Balanced) 20 kΩ
Input Sensitivity 0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 70V/100V
Intermodulation Distortion (SMPTE) 0.05 %
Mains Voltage 220 - 240 V, 50 - 60 Hz or 120 V, 50 - 60 Hz, 50 - 60 Hz
Maximum Bridged Output 4Ω 1000 Watts
Maximum Bridged Output 8Ω 1000 Watts
Network Control (IRIS-Net) Optional
Slew Rate 28 V/µs
Total Harmonic Distortion 0.05 %
Variable Load Drive (VLD) Yes
Height 2RU 88.1 mm (3.47“)
Width 481 mm (18.94“)
Depth 421.5 mm (16.59“)
Weight Net 11.1 kg (24.47 lbs)

aposirsi_electrovoice

OUTPUT POWER S-1500 S-2000 S-3000 S-4000 S-6000 S-3004 S-4004 S-4044 S-6004 S-6044
1kHz, 1.0% THD
2 ohms 2x880W 2x1190W 2x1570W 2x1950W 2x2950W 4x700W 4x980W - 4x1440W -
4 ohms 2x575W 2x790W 2x1100W 2x1380W 2x2025W 4x500W 4x670W 4x975W 4x1000W 4x1480W
8 ohms 2x325W 2x460W 2x630W 2x810W 2x1250W 4x300W 4x430W 4x690W 4x620W 4x1015W
Bridge @ 4ohms 1760W 2380W 3140W 3900W 5900W 2x1400W 2x1960W - 2x2880W -
Bridge @ 8ohms 1150W 1580W 2200W 2760W 4050W 2x1000W 2x1340W 2x1950W 2x2000W 2x2960W
P. N. 12dB C.F.
2 ohms 2x975W 2x1360W 2x2060W 2x2460W 2x4225W 4x890W 4x1170W - 4x2080W -
4 ohms 2x610W 2x880W 2x1240W 2x1600W 2x2600W 4x580W 4x820W 4x1230W 4x1280W 4x2110W
Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V 3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB 3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A 3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™

Amplifier Gain 32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
Analog Inputs 4, electronically balanced, Phoenix-type
Audio Network No
CAN Bus Interface Yes (With Optional RCM-810 Card)
Continuous Rated Power
(1 kHz, THD 1%) 100v 1000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 2Ω 1000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 4Ω 1000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 70v 1000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 8Ω 500 Watts
Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Cooling Front-to-Rear, continuously variable fans
DIM 30 0.02 %
Electronics Type Amplifier
Frequency Response 15 Hz-30 kHz
Input Impedance (Balanced) 20 kΩ
Input Sensitivity 0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 70V/100V
Intermodulation Distortion (SMPTE) 0.05 %
Mains Voltage 220 - 240 V, 50 - 60 Hz or 120 V, 50 - 60 Hz, 50 - 60 Hz
Network Control (IRIS-Net) Optional
Total Harmonic Distortion 0.05 %
Variable Load Drive (VLD) Yes
Height 2RU 88.1 mm (3.47“)
Width 483 mm (19.02“)
Depth 421.5 mm (16.59“)
Weight Net 11.1 kg (24.47 lbs)

aposirsi_electrovoice

The C 16:4 is one of two mid-power, four-channel amplifiers in the C Series family. Attractively packaged in a 2U chassis, it provides 4 × 400 W output into 4 ohm loads.

C Series amplifiers are uniquely capable of adapting to a wide variety of demanding load conditions. Each channel has an individually configurable Voltage Peak Limiter (VPL™), which allows the output to be optimized for any loudspeaker load – whether a single large subwoofer or a series of small 100/70 V loudspeakers. VPL works in combination with adjustable input gain to achieve maximum headroom regardless of input levels or output impedances.

Every C Series is ready for the NomadLink® network right out of the box. With NomadLink, key amplifier parameters are displayed via DeviceControl software, and remote control of channel mutes and power on/off is under network control.

Specifications C 16:4

General
Number of channels 4
Peak total output all channels driven 1600 W
Peak output voltage per channel 141 V
Max. output current per channel 8.5 Arms
Max. Output Power 16 ohms 8 ohms 4 ohms 2 ohms Hi-Z
Per ch. (all ch.’s driven) 400 W 400 W 300 W n.r. 400 W (70 Vrms / 100 V peak)
Bridged per ch. 800 W 600 W n.r. n.r. 800 W (140 Vrms / 200 V peak)
Performance with Gain: 35 dB and VPL: 100 V
THD 20 Hz - 20 kHz for 1 W 70 dB
Frequency response (1 W into 8 ohms) +0/-3 dB 6.8 Hz - 34.2 kHz
Input impedance 20 kOhm
Input Common Mode Rejection, CMR 50 dB
Output impedance @ 100 Hz 30 mOhm
Voltage Peak Limiter (VPL), max. peak output
VPL, selectable per ch. 3) 141, 118, 100, 85, 71, 59, 50, 42 V
VPL, selectable when bridged 3) 1) 282, 236, 200, 170, 142, 118, 100, 84 V
Voltage Peak Limiter mode (per ch.) Hard / Soft
Gain and Level
Amplifier gain selectable (all channels) 1)
– rear-panel switches
23, 26, 29, 32, 35, 38, 41, 44 dB
Default gain 35 dB
Level adjustment (per ch.) Front-panel potentiometer, 21 position detented from -inf to 0 dB, hidden behind security panel/dust filter grille
Connectors and switches
Input connectors (per ch.) 3-pin Phoenix, electronically balanced
Output connectors (per ch.) Barrier strip 2-pole screw terminals
Output bridge mode A+B and/or C+D, inputs A and C are input source
NomadLink® network On board, 2 x RJ45 connectors
Intelligent fans (on/off) Yes, depending on presence of output signal
Power on/off and Remote enable on/off Individual switches on front-panel
Cooling Two fans, front-to-rear airflow, temperature controlled speed
Front-panel indicators
Common NomadLink® Network; Power Average Limiter (PAL) 2); Power on
Per channel
Signal present / High-impedance; -10 dB and -4 dB output signal; Voltage Peak Limiter (VPL); Current Peak Limiter (CPL);
Very High Frequency (VHF); High Temperature; Fault; Mute
Power
Operating voltage, 230 V / 115 V nominal 130 -265 V / 65-135 V
Minimum power-up voltage, 230 V / 115 V 171 V / 85 V
Power Average Limiter (PAL) 2) Yes
Soft start / Inrush current draw Yes / max. 5 A
Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 20 A / NEMA 5-20P
Dimensions (W/H/D) W: 483 mm (19”), H: 88 mm (2 U), D: 343 mm (13.5”)
Weight 12 kg (26.4 lbs.)
Finish Black painted steel chassis with gray painted steel front
Approvals CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC
Note 1): Automatic -6 dB gain compensation when bridging channels. Ch.’s A+B and/or C+D, can be bridged individually.
Note 2): PAL can reduce the maximum output power to keep the power supply operating safely, and/or to prevent excessive current draw tripping the mains breaker.
Refer to Operation Manual.
Note 3): For sine waves, peak voltage output values translate to Vrms with the formula V/1.41 = Vrms. E.g. 100 V peak equals app. 70 Vrms.
Hence, outputs can be set for high-impedance loads without requiring a transformer.
All specifications are subject to change without notice.

• Eight and four channel models with 300W and 150W per channel • Minimal footprint and mass arround 200mm depth and 6 Kg • Optional Add-on card to interface with third party alarm systems with GPIO connections • FCM™ Faulty Channel Management system to avoid entire device shutdown • State-of-the-art layout for maximum performance and reliability • Highly oversized thermal dissipation design for maximum reliability • Superb distortion and noise figures • All channels bridgeable by pairs • Selectable gain in four channel groups (26, 32 and 38dB) • Subsonic filter per channel (35Hz user selectable) • Temperature and signal dependant, intelligent cooling system for minimal noise • Optimal heat extraction due to the air tunneled enclosure and insulator-less power device attachment to the heatsink • Direct connector-less output for maximum quality loudspeaker control • High grade engineering inside with the latest SMD technology • Balanced Inputs with 0.1% tolerance resistors for a precise noise rejection • Critical electronic and mechanical parts selection • Innovative protection systems, FCM™ Faulty Channel Management and SSP™ SOA Sentry Protection • Detented and optionally tamper-proof volume potentiometers • Hi efficiency, two steps Class H Audio topology • Protection, Signal and Clip indicators per channel • Power On and Standby general indicators • Extremely compact, fully featured QuantaPulse Power supply • Low current consumption and heat generation allowing less demanding conditions for multiple amplifier installations • Factory preset worldwide mains voltage power supply • Laser cut four milimeters aluminium front panel • Rugged 2U steel chasis   Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >70dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: T604:1.5/0.8/0.4V - T1204:2.1/1.0/0.5V - T1208:1.4/0.7/0.4V - T2408:2.0/1.0/0.5V Signal to noise ratio: T604:107dB - T1204:110dB - T1208:107dB - T2408:110dB Required AC Mains (@8ohms 1/8 rated power): T604:1A - T1204:1.5A - T1208:1.4A - T2408:2.6A Dimensions (WxHxD): 483x88.9x210 mm - 19x3.5x8.27 inches Weight (Net): T604/T1204: 5.4Kg - 11.8Lbs T1208/T2408: 6.2Kg-13.5Lbs Protections: Soft-start, Turn-on Turn-off muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, SSP™ and FCM™
OUTPUT POWER T-604 T-1204 T-1208 T-2408
RMS, 1kHz, 1.0% THD+N
4 ohms 4x 160 W 4x 320 W 8x 150 W 8x 300 W
8 ohms 4x 115 W 4x 220 W 8x 100 W 8x 195 W
Bridge @ 8ohms 2x 320 W 2x 640 W 4x 300 W 4x 600 W
Pink Noise 12dB CF
4 ohms 4x 210 W 4x 415 W 8x 180 W 8x 370 W
 Weight11.50 kg11.10 kg8.50 kg11.10 kg12.00 kg6.20 kgDimensionsN/AN/AN/AN/AN/AN/AAdditional information
Weight 11.50 kg
Weight 11.10 kg
Weight 8.50 kg
Weight 11.10 kg
Weight 12.00 kg
Weight 6.20 kg