INTERM QD-4480 AMPLIFIER 4X120W

852.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Power Output Level:  QD4480                        8ohm (Quad Ch)       80W     4ohm (Quad Ch)       120W     8ohm bridged mono   240W  Input Sensitivity (8ohm, 1kHz)  0.775Vrms Input Impedance 20kohm Balanced  Slew Rate (8ohm, Full Swing) ±30V/?sec Frequency Response (±0.5dB) 20kHz ~ 50kHz  T.H.D. (f=20Hz~20kHz, Half Power) 0.03%  Signal to Noise Ratio 105dB Damping Factor (8ohm, 1kHz)  100 Rasidual Noise  -85dB Channel […]

 

Read more

Power Output Level:  QD4480                       

8ohm (Quad Ch)       80W    
4ohm (Quad Ch)       120W    
8ohm bridged mono   240W 

Input Sensitivity (8ohm, 1kHz)  0.775Vrms
Input Impedance 20kohm Balanced 
Slew Rate (8ohm, Full Swing) ±30V/?sec
Frequency Response (±0.5dB) 20kHz ~ 50kHz 
T.H.D. (f=20Hz~20kHz, Half Power) 0.03% 
Signal to Noise Ratio 105dB
Damping Factor (8ohm, 1kHz)  100
Rasidual Noise  -85dB
Channel Separation (8ohm, 1kHz)  80dB
Voltage Gain (4ohm)  26dB 29dB 32dB
Power Source  100-120VAC or 220-240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
Power Consumption  300W 420W 770W
Weight  11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb
Dimensions  482(W) x 88(H) x 369(D) mm
/19(W) x 3.5(H) x 14.5(D) in
 

Weight 15.50 kg

Reviews

There are no reviews yet.

Be the first to review “INTERM QD-4480 AMPLIFIER 4X120W”

Your email address will not be published. Required fields are marked *

Quick Comparison

INTERM QD-4480 AMPLIFIER 4X120W removeINTERM QD-4960 4Channel AMPLIFIER 4X240W 4 OHM removeINTER-M SP-100 SYSTEM DIGITAL AMPLIFIER 60W 6 Channel removeYAMAHA XM-4180 Power Amplifier 4x180W removeAUDAC AUDPA73 3-channel Digital Power Amplifier removeRAM AUDIO T-1204 Power Amplifier 4x320 Watts remove
NameINTERM QD-4480 AMPLIFIER 4X120W removeINTERM QD-4960 4Channel AMPLIFIER 4X240W 4 OHM removeINTER-M SP-100 SYSTEM DIGITAL AMPLIFIER 60W 6 Channel removeYAMAHA XM-4180 Power Amplifier 4x180W removeAUDAC AUDPA73 3-channel Digital Power Amplifier removeRAM AUDIO T-1204 Power Amplifier 4x320 Watts remove
Imageinter-m sp-100 digital amplifier 6ch 60w
SKUQD-4480QD-4960SP-100H060.00038AUDPA73T-1204
Rating
Price 852.00 incl. GR VAT 1,075.00 incl. GR VAT 715.00 incl. GR VAT 1,725.00 incl. GR VAT 441.43 incl. GR VAT 1,071.35 incl. GR VAT
Stock

In stock

Only 1 left in stock

In stock

Available on backorder

Out of stock

Available on backorder

AvailabilityIn stockOnly 1 left in stockIn stockAvailable on backorderOut of stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Read more

Add to cart

Description
Content

Power Output Level:  QD4480                       

8ohm (Quad Ch)       80W    
4ohm (Quad Ch)       120W    
8ohm bridged mono   240W 

Input Sensitivity (8ohm, 1kHz)  0.775Vrms
Input Impedance 20kohm Balanced 
Slew Rate (8ohm, Full Swing) ±30V/?sec
Frequency Response (±0.5dB) 20kHz ~ 50kHz 
T.H.D. (f=20Hz~20kHz, Half Power) 0.03% 
Signal to Noise Ratio 105dB
Damping Factor (8ohm, 1kHz)  100
Rasidual Noise  -85dB
Channel Separation (8ohm, 1kHz)  80dB
Voltage Gain (4ohm)  26dB 29dB 32dB
Power Source  100-120VAC or 220-240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
Power Consumption  300W 420W 770W
Weight  11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb
Dimensions  482(W) x 88(H) x 369(D) mm
/19(W) x 3.5(H) x 14.5(D) in
 

Power Output Level QD4960 : 8ohm (Quad Ch)        170W 4ohm (Quad Ch)        240W 8ohm bridged mono   480W Input Sensitivity (8ohm, 1kHz)  0.775Vrms Input Impedance 20kohm Balanced Slew Rate (8ohm, Full Swing) ±30V/?sec Frequency Response (±0.5dB) 20kHz ~ 50kHz T.H.D. (f=20Hz~20kHz, Half Power) 0.03% Signal to Noise Ratio 105dB Damping Factor (8ohm, 1kHz)  100 Rasidual Noise  -85dB Channel Separation (8ohm, 1kHz)  80dB Voltage Gain (4ohm)  26dB 29dB 32dB Power Source  100-120VAC or 220-240VAC ; 50/60Hz (supplied AC mains transformer depends on country requirements) Power Consumption  300W 420W 770W Weight  11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb Dimensions  482(W) x 88(H) x 369(D) mm /19(W) x 3.5(H) x 14.5(D) in- 6CH 60W DIGITAL AMPLIFIER - LIGHT WEIGHT - 6 BUS BROADCASTING FUNCTION WITH A UTP (CATEGORY 5) CABLE. - VOLUME AND 5 BAND EQ TUNING FUNCTION BY CHANNEL - AMP ID AUTO/MANUAL ALLOCATION FUNCTION - SELF-BROADCASTING FUNCTION USING A LOCAL INPUT - INTERFACE FUNCTION WITH OTHER EQUIPMENT USING A CONTROL INPUT/OUTPUT CONTACT
  • Manufacturer: INTER-M
  • Category: AMPLIFIERS
  • Use: POWER AMPLIFIERS 100V
  • Measurement Unit: Attribute34381
  • Warranty Months: 12
  • Depth (cm): 38.0
  • AC Line Voltage and Frequency Configurations Available: 220-240VAC DC24V
  • Height (cm): 8.8
  • Weight (Kg): 13.0
  • Order Quantity: 1
  • Power Output: 60
  • Rack Installation Possible: Yes
  • Channels: 6
  • Power Output W/4Ω: 60
  • Frequency Response (at 1W, 4/8Ω) (dB) ±: 80Hz-20KHz
  • Catalog: Professional
  • Amplifier Type: Power Amplifier
  • Load Impedance: Ohm
  • Group: Attribute49042, Attribute50583
  • Width (cm): 48.2

The XM series multi-channel power amplifiers are ideal for theater, hall, and conference room installations. The lineup includes 80W × 4 and 180W × 4 models, meeting the needs of a wide variety of installed systems. The XM amplifiers are a compact 2U size and surprisingly lightweight, making them easy to handle and install. Switching power supplies deliver high output power while minimizing the unit's physical size. The XM series has monitor/remote jacks that allow external devices to be connected for status monitoring or control from a remote location.

Dimensions (W x H x D): 480 x 88 x 412 mm, Weight: 10 kg

  • Four high-power channels.
  • Switchable stereo, parallel, or bridged operation.
  • Versatile connectivity and high-pass filters for a variety of applications.
  • Distribution drive capability for parallel multi-speakers systems (XM4180).
  • Monitor/Remote connector for remote monitoring and control.
  • The DPA series amplifi ers are digital power amplifi ers designed to meet the specializedneeds of sound contractors for Multi-Zone distributed speaker systems. They are designedin six different models of Class D power amplifi ers, divided in three different architecturesto meet the requirements for all kinds of applications. They combine the best of all features in one single series of amplifi ers, providing anoutstanding sound quality with all the known advantages of Class D Amplifi ers. Such asthe excellent effi ciency and very low heat dissipation. And due to the complete passivelycooled entity only a minimal of maintenance is needed, while ensuring maximumreliability. The small size of a single rack space make them very interesting for fi xed rack mount aswell as mobile applications. The DPA73 and DPA153 are built as two channel (Stereo) amplifi ers, with an additionalchannel for powering a subwoofer cabinet. It contains an active crossover network witha frequency of 120Hz and advanced protection circuitry which protects against DCmalfunctioning, short circuit, overheating and overload. The signal input connections are accommodated with balanced XLR connectors andsignal link through with other amplifi ers is possible using the XLR output connectors. Theoperation mode can be selected between Stereo mode, Bridge mode and Parallel mode.The output connections are accommodated with Euro-Terminal blocks.
    • Model Name / Type: DPA73 / Digital Amplifier
    • 8 ohms: 2 x 50 W + 150 W
    • 4 ohms: 2 x 75 W + 225 W
    • THD+N:
    • Signal / Noise: > 100 dB
    • Frequency Response: 20 Hz - 20 kHz
    • Power Supply: 240 V AC / 50 - 60 Hz
    • Dimensions (W x H x D): 483 x 44 x 300 mm
     
    • Eight and four channel models with 300W and 150W per channel • Minimal footprint and mass arround 200mm depth and 6 Kg • Optional Add-on card to interface with third party alarm systems with GPIO connections • FCM™ Faulty Channel Management system to avoid entire device shutdown • State-of-the-art layout for maximum performance and reliability • Highly oversized thermal dissipation design for maximum reliability • Superb distortion and noise figures • All channels bridgeable by pairs • Selectable gain in four channel groups (26, 32 and 38dB) • Subsonic filter per channel (35Hz user selectable) • Temperature and signal dependant, intelligent cooling system for minimal noise • Optimal heat extraction due to the air tunneled enclosure and insulator-less power device attachment to the heatsink • Direct connector-less output for maximum quality loudspeaker control • High grade engineering inside with the latest SMD technology • Balanced Inputs with 0.1% tolerance resistors for a precise noise rejection • Critical electronic and mechanical parts selection • Innovative protection systems, FCM™ Faulty Channel Management and SSP™ SOA Sentry Protection • Detented and optionally tamper-proof volume potentiometers • Hi efficiency, two steps Class H Audio topology • Protection, Signal and Clip indicators per channel • Power On and Standby general indicators • Extremely compact, fully featured QuantaPulse Power supply • Low current consumption and heat generation allowing less demanding conditions for multiple amplifier installations • Factory preset worldwide mains voltage power supply • Laser cut four milimeters aluminium front panel • Rugged 2U steel chasis    
    OUTPUT POWER T-604 T-1204 T-1208 T-2408
    RMS, 1kHz, 1.0% THD+N
    4 ohms 4x 160 W 4x 320 W 8x 150 W 8x 300 W
    8 ohms 4x 115 W 4x 220 W 8x 100 W 8x 195 W
    Bridge @ 8ohms 2x 320 W 2x 640 W 4x 300 W 4x 600 W
    Pink Noise 12dB CF
    4 ohms 4x 210 W 4x 415 W 8x 180 W 8x 370 W
    Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >70dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: T604:1.5/0.8/0.4V - T1204:2.1/1.0/0.5V - T1208:1.4/0.7/0.4V - T2408:2.0/1.0/0.5V Signal to noise ratio: T604:107dB - T1204:110dB - T1208:107dB - T2408:110dB Required AC Mains (@8ohms 1/8 rated power): T604:1A - T1204:1.5A - T1208:1.4A - T2408:2.6A Dimensions (WxHxD): 483x88.9x210 mm - 19x3.5x8.27 inches Weight (Net): T604/T1204: 5.4Kg - 11.8Lbs T1208/T2408: 6.2Kg-13.5Lbs Protections: Soft-start, Turn-on Turn-off muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, SSP™ and FCM™
     
    Weight15.50 kg17.00 kg13.00 kg10.00 kg6.00 kg5.40 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 15.50 kg
    Weight 17.00 kg
    Weight 13.00 kg
    Weight 10.00 kg
    Weight 6.00 kg
    Weight 5.40 kg