| Content |
|
|
|
- FULL LOGIC AUTO-REVERSE
Logic-controlled auto-reverse is provided for continuous playback.
- NORMAL AND HIGH-SPEED SYNCHRO DUBBING
Synchro dubbing from Deck A to Deck B is available at normal or high speed.
- RESERVE TIMER
Automatically begins playing or recording when AC mains power is switched on.
- AUTOMATIC MUSIC SEARCH
Will automatically Fast-Forward or Rewind to the beginning of the next program or current program.
- DIGI-LINK
Remote Control Compatible with the "Digi-link” control system only available in Korea (not used in other countries). It uses PHILIPS-CODE.
- SKIP BLANK
Fast-forwards through blank spaces between programs or at end of tape.
- DIGITAL TAPE COUNTER (DECK B)
This numeric display shows the current position of the tape relative to the last time the counter was reset to zero (000).
ACCESSORIES
Detachable AC Mains Power Cable
2 Stereo RCA Cables |
|
|
|
|
|
| |
|
| Type |
Auto-Reverse double cassette deck with operating controls
|
| Track System |
4-track 2-channel Stereo play (deck A) & record/play (deck B)
|
| Record and Erase System |
AC Bias System (Bias Frequency: 87 kHz)
|
| Tape Speed |
4.76cm/sec (Playback/Record), 7.14cm/sec (High Speed Dubbing)
|
| Head |
DECK A: Rotating reverse head (Play head x1)
DECK B: Rotating reverse head (Rec/play head x 1) (Erase head x 1)
|
| Motor |
High torque DC motor
|
| Wow and Flutter |
Less than 0.3% (JIS WTD) WRMS
|
| Fast Winding Time |
100 sec (±) 5 sec. (C-60 TAPE)
|
| Frequency Response |
(±3dB) 125Hz-6.3kHz, Normal Tape
|
| Signal to Noise(S/N) |
Over than 40dB
|
| Input Sensitivity/Impedance |
160mV/10kΩ
|
| Output Level/Impedance |
600mV/600Ω
|
| Erase Ratio |
45dB
|
| |
|
| |
|
| Power Source |
100–120VAC or 220V–240VAC; 50/60Hz, 24V DC
(Supplied AC mains transformer depends on country requirements)
|
| Power Consumption |
24W
|
| Weight |
5.8kg/12.8lb
|
| Dimensions |
482(W)x132(H)x280(D)mm/19(W)x5.2(H)x11(D)in
|
| Operating Temperature |
-10°C ~ 40°C
|
| ※ Specifications and design subject to change without notice. |
|
|
|
|
| | - FAN FOR PA RACK Auto fan operates when the inside temperature of PA RACK goes up. - MANUAL OPERATING When it's manual mode, the fan operates always regardless of temperature. - AUTO OPERATING When it's auto mode, the fan operates at 35°C. | | | | | | PF- 602 | | Operation Selector Switch | Manual, Auto, Operating temperature | | Fan | 2 DC fans | | Power Source | 24VDC | | Power Consumption | 160mA | | Weight | 4Kg/8.8Ib | | Dimensions( W x H x D) | 482x 88 x 380 mm / 19 x 3.5 x 15in | | ※ Specifications and design subject to change without notice. | | | |
|
The RM-300MF Fireman's Microphone is designed for exclusive use with the VM-3000 Series. It is equipped with an emergency activation key, permitting pre-recorded evacuation and alert announcements to be activated, and microphone announcement to be made in emergency situations. By connecting the RM-320F Fireman's Microphone Extension to the RM-300MF, the number of function keys can be expanded. The zone selection or failure acknowledgment function can be assigned to such function keys.
| Power Source | 24 V DC (operating range: 15 - 40 V DC, supplied from the VM-3000 system) | | Current Consumption | 120 mA (RM-300MF), 660 mA (with 3 RM-320F connected) | | Frequency Response | 200 Hz - 15 kHz | | Distortion | 1 % or less | | S/N Ratio | 55 dB or more | | Microphone | Unidirectional dynamic microphone with talk key, compressor (on/off switchable) | | Volume Control | Microphone volume control, Buzzer volume control | | Connection Cable | Main line: Shield CPEV cable (each one pair of Audio line, Data line, Power supply line)
or Category 5 Shielded Twisted-Pair straight cable for LAN (CAT5-STP), M3 screw terminal | | Maximum Cable Distance | Total 800 m (874.89 yd) | | No. of Connectable RM-320F | Max. 3 units | | Operation | Emergency key, Evacuate key, Alert key, Emergency reset key, CPU switch, Reset switch | | Indicator | Power indicator, Emergency indicator, Communication failure indicator, CPU OFF indicator,
Evacuation announcement indicator, Alert announcement indicator,
Emergency reset indicator, Microphone in-use indicator,
Emergency broadcast equipment in-use indicator | | Operating Temperature | -5 ℃ to +45 ℃ (23 ゜F to 113 ゜F) | | Operating Humidity | 5 % to 95 %RH (no condensation) | | Finish | ABS resin, blueish gray (PANTONE 538 or its equivalent) | | Dimensions | 200 (W) × 215 (H) × 82.5 (D) mm (7.87" × 8.46" × 3.25“) | | Weight | 1.1 kg (2.43 lb) (with wall mounting bracket unit) | | Accessory | Wall mounting bracket unit …1, Wall mounting screw …2 |
|
The AT series high quality attenuators features 5 attenuation settings ,,OFF'' -18dB,-12db,-6dB,-0dB. An input range from 0.5W to 60W (model dependent), and push-in connectors. Push-in connector allows quick terminal cable connection. Stylishly finished, the AT Series will suit any décor. |
toa-at-100upr Build-in Attenuator with Relay
Toa - 100V installation
Build-in Attenuator with Relay 100 W / 100 V
|
The ATT-30 from Inter-M Americas is a one-gang wall panel attenuator. The knob has four clearly-labeled steps to make easy adjustments. A screwless terminal block simplifies installation, and the sleek, modern design fits into any environment. The attenuator can handle up to 30W. |
Reviews
There are no reviews yet.