INTER-M PD-659 POWER DISTRIBUTOR/CONTROL UNIT

314.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
– SYSTEM POWER CONTROL You can control the power of your system by using this model. – AC AND DC POWER SUPPLY You can distribute AC and DC power through the AC outlet and DC terminals on the rear panel. – USE OF EMERGENCY POWER SUPPLY For emergency equipment power supply, an extra DC terminal […]

 

Read more

– SYSTEM POWER CONTROL

You can control the power of your system by using this model.

– AC AND DC POWER SUPPLY

You can distribute AC and DC power through the AC outlet and DC terminals on the rear panel.

– USE OF EMERGENCY POWER SUPPLY

For emergency equipment power supply, an extra DC terminal is provided.

– REMOTE CONTROL

You can control the system power by remote control function even though the power switch on front is off.

– AC AND DC VOLT METER

This model uses digital volt meter displays of AC and DC.

– OPERATING MODE DISPLAY

You can easily check the operating mode by LEDs, AC or DC operating and emergency power.

PD-659

AC Outlet

Switched 2000W ⅹ3

Unswitched 700W ⅹ1

Remote Control

1

DC Power Output

DC 24V 5A

Operation Temperature

-10℃~+40℃

Power Source

100-120VAC or 220-240VAC; 50/60Hz

(Supplied ACmains transformer depends on country requirements)

Power Consumption

190W

Weight(SET)

6.2Kg/13.6Ib

Dimension(SET)

482(W) x 88(H) x 380(D)mm/19(W) x 3.5(H) x 15(D)in

※ Specifications and design subject to change without notice.

Weight 6.20 kg

Reviews

There are no reviews yet.

Be the first to review “INTER-M PD-659 POWER DISTRIBUTOR/CONTROL UNIT”

Your email address will not be published. Required fields are marked *

Quick Comparison

INTER-M PD-659 POWER DISTRIBUTOR/CONTROL UNIT removeTOA RM-300MF Fireman's Microphone removeINTER-M PB-607 BATTERY CHARGER removeINTER-M ATT-30 ATTENUATOR 330Ω, 7-30W removeINTER-M LM-8000 REMOTE LINE/MIC INPUT PX-8000 removeTOA AT-100UPR Attenuator with Relay 100 W remove
NameINTER-M PD-659 POWER DISTRIBUTOR/CONTROL UNIT removeTOA RM-300MF Fireman's Microphone removeINTER-M PB-607 BATTERY CHARGER removeINTER-M ATT-30 ATTENUATOR 330Ω, 7-30W removeINTER-M LM-8000 REMOTE LINE/MIC INPUT PX-8000 removeTOA AT-100UPR Attenuator with Relay 100 W remove
Image
SKUPD-659RM-300MFPB-607ATT-30LM-8000AT-100UPR
Rating
Price 314.00 incl. GR VAT 840.00 incl. GR VAT 158.00 incl. GR VAT 16.78 incl. GR VAT 140.00 incl. GR VAT 145.09 incl. GR VAT
Stock

In stock

Available on backorder

In stock

In stock

In stock

Available on backorder

AvailabilityIn stockAvailable on backorderIn stockIn stockIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

- SYSTEM POWER CONTROL

You can control the power of your system by using this model.

- AC AND DC POWER SUPPLY

You can distribute AC and DC power through the AC outlet and DC terminals on the rear panel.

- USE OF EMERGENCY POWER SUPPLY

For emergency equipment power supply, an extra DC terminal is provided.

- REMOTE CONTROL

You can control the system power by remote control function even though the power switch on front is off.

- AC AND DC VOLT METER

This model uses digital volt meter displays of AC and DC.

- OPERATING MODE DISPLAY

You can easily check the operating mode by LEDs, AC or DC operating and emergency power.

PD-659

AC Outlet

Switched 2000W ⅹ3

Unswitched 700W ⅹ1

Remote Control

1

DC Power Output

DC 24V 5A

Operation Temperature

-10℃~+40℃

Power Source

100-120VAC or 220-240VAC; 50/60Hz

(Supplied ACmains transformer depends on country requirements)

Power Consumption

190W

Weight(SET)

6.2Kg/13.6Ib

Dimension(SET)

482(W) x 88(H) x 380(D)mm/19(W) x 3.5(H) x 15(D)in

※ Specifications and design subject to change without notice.

The RM-300MF Fireman's Microphone is designed for exclusive use with the VM-3000 Series. It is equipped with an emergency activation key, permitting pre-recorded evacuation and alert announcements to be activated, and microphone announcement to be made in emergency situations. By connecting the RM-320F Fireman's Microphone Extension to the RM-300MF, the number of function keys can be expanded. The zone selection or failure acknowledgment function can be assigned to such function keys.

Specification
Power Source 24 V DC (operating range: 15 - 40 V DC, supplied from the VM-3000 system)
Current Consumption 120 mA (RM-300MF), 660 mA (with 3 RM-320F connected)
Frequency Response 200 Hz - 15 kHz
Distortion 1 % or less
S/N Ratio 55 dB or more
Microphone Unidirectional dynamic microphone with talk key, compressor (on/off switchable)
Volume Control Microphone volume control, Buzzer volume control
Connection Cable Main line: Shield CPEV cable (each one pair of Audio line, Data line, Power supply line)
or Category 5 Shielded Twisted-Pair straight cable for LAN (CAT5-STP), M3 screw terminal
Maximum Cable Distance Total 800 m (874.89 yd)
No. of Connectable RM-320F Max. 3 units
Operation Emergency key, Evacuate key, Alert key, Emergency reset key, CPU switch, Reset switch
Indicator Power indicator, Emergency indicator, Communication failure indicator, CPU OFF indicator,
Evacuation announcement indicator, Alert announcement indicator,
Emergency reset indicator, Microphone in-use indicator,
Emergency broadcast equipment in-use indicator
Operating Temperature -5 ℃ to +45 ℃ (23 ゜F to 113 ゜F)
Operating Humidity 5 % to 95 %RH (no condensation)
Finish ABS resin, blueish gray (PANTONE 538 or its equivalent)
Dimensions 200 (W) × 215 (H) × 82.5 (D) mm (7.87" × 8.46" × 3.25“)
Weight 1.1 kg (2.43 lb) (with wall mounting bracket unit)
Accessory Wall mounting bracket unit …1, Wall mounting screw …2

 

- AUTOMATIC CHARGING

Tapered charging circuitry charges your backup batteries without risk of overcharging.

- EASY BATTERY MONITORING

Integrated digital volt meter and digital ampere meter allow you to monitor the status of your batteries.

PB-607

Battery Requirement

24V DC

Starting Current

3A Max.

Charge Complete Voltage

27.3V ±10%

Operation Temperature

-10℃~+40℃

Power Source

100-120VAC or 220-240VAC; 50/60Hz

(Supplied AC mains transformer depends on country requirements)

Power Consumption

130W

Weight(SET)

7Kg/15.4Ib

Dimension(SET)

482(W) x 88(H) x 280(D)mm/19(W) x 3.5(H) x 11(D)in

The ATT-30 from Inter-M Americas is a one-gang wall panel attenuator. The knob has four clearly-labeled steps to make easy adjustments. A screwless terminal block simplifies installation, and the sleek, modern design fits into any environment. The attenuator can handle up to 30W.

- CONVENIENT INSTALLATION AND CONSTRUCTION WITHOUT NEED OF ID SETTING.

- ADOPTION OF RS-422 COMMUNICATION METHOD TO SUPPORT A LONG DISTANCE.

- REMOTE CONTROL FOR ZONE VOLUME AND SELECTION OF BGM.

- INDEPENDENT LOCAL MIC AND BGM BROADCASTING.

Audio Output

0dB(Balanced)

Audio Input

Paging & RM MIC & LM MIC

-50dB(Balanced)

BGM(Main & Local)

-10dB(Balanced)

Tone Control

(100Hz & 10kHz)

Paging MIC

± 10dB

Audio Output

± 12dB

Frequency Response

BGM

± 3dB

MIC

± 3dB

S / N

BGM

Better than 75dB

MIC

Batter than 65dB

T.H.D.

BGM

Less than 0.05%

MIC

Less than 0.05%

Priority Control

Paging MIC > DRP > RM1> RM2 > RM3 > RM4 > LM-8000 > Main BGM

Phantom Power

DC 24V

Serial Interface

Communication Speed

9600bps

Communication Distance

Maximum 300m(UTP CAT%)

Operation Temperature

-10℃ ~ +40℃

Power Source

100-120VAC or 220-240VAC; 50/60Hz

(Supplied AC mains transformer depends on country requirements)

Weight(SET)

130g / 0.28lb

Dimensions(SET)

70(W) x 114(H) x 52(D)mm

2.8(W) x 4.5(H) x 2.0(D)in

※ Specifications and design subject to change without notice.

toa-at-100upr Build-in Attenuator with Relay
Toa - 100V installation


Build-in Attenuator with Relay 100 W / 100 V

Weight6.20 kg1.10 kg7.00 kg0.50 kg0.13 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.20 kg
Weight 1.10 kg
Weight 7.00 kg
Weight 0.50 kg
Weight 0.13 kg
Weight 1.00 kg