Content |
- Unidirectional Dynamic Microphone
- Remote Chime Switch
- Mic ON/OFF Switch
- 2 Push Buttons for Easy Operation
| |
|
RM-01
| Input Sensitivity / Impedance |
75dB±3dB (0dB=1V/µber at 1,000Hz), 600ohm
| Frequency Response |
100Hz~18kHz
| Type |
Moving Coil Dynamic
| Directional Characteristic |
Unidirectional
| Weight |
3lbs.
1.4kg
| Dimensions |
3.5(W) X 1.8(H) X 5.2(D) inches
90(W) x 45(H) x 133(D) mm
|
*Specifications and design subject to change without notice for improvements.
| |
| The Shure SM58S Vocal Microphone features a cardioid dynamic vocal design well suited for professional vocal use in live performances, sound reinforcement, and studio recording. A built-in spherical filter minimizes wind and breath "pop" noise, while the cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The microphone offers durable construction, a high-quality internal shockmount system, and a steel mesh grille for withstanding rough handling. The SM58S is designed to perform consistently both outdoors and indoors and when used for singing or speech applications. The microphone features an integrated on/off switch and includes a microphone clip and a zippered pouch.
- Pneumatic shockmount system cuts down handling noise
- Effective, built-in spherical wind and pop filter
- Supplied with break-resistant microphone clip that rotates 180 degrees
- High quality, rugged, and reliable
- Cardioid dynamic
- Frequency response: 50 Hz to 15 kHz
Suggested Applications
Lead Vocals
Backup Vocals
Harmonica
Frequency Range |
50 Hz to 15 kHz |
Impedance |
150 Ohms |
Sensitivity |
-57.5 dBV/Pa at 1 kHz |
|
Unidirectional cardoid-pattern microphone with high sensitivity and extended frequency response. Factory-fitted for direct connection to the AM4000 series, PR4092, EL2126 CD sintoamplifier and 1000 series amplifiers.
General Specs
- Plastic body with 320 mm gooseneck
- Pushbutton for momentary microphone activation
- Connections on screw terminals inside
Specifications
- Type:Desktop paging microphone with dinamyc capsule
- Directivity:Unidirectional - Cardioid
- Frequency Response:100Hz ÷ 12 kHz
- Microphone Sensitivity:- 71 dB ± 3
- Output impedance:500Ω
- Signal/noise ratio:40dB
- Connector:3 pole XLR
Size/Weight
- Height:270 / 10.62mm/inch
- Width:200 / 7.87mm/inch
- Depth:132 / 5.20mm/inch
- Net Weight:6 / 3.53kg/lbs
| Optimized for low-frequency bass punch/high-power SPL handling. Designed for kick drum.
The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch“, and delivers studio quality sound even at extremely high sound pressure levels.
The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring.
Features
- Frequency response shaped specifically for kick drums and bass instruments
- Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
- Studio quality performance, even at extremely high sound pressure levels
- Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
- Hardened steel mesh grille that resists wear and abuse
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Neodymium magnet for high signal–to–noise ratio output
- Low sensitivity to varying load impedance
- Legendary Shure quality and reliability
Type |
Dynamic (moving coil) |
Frequency Response |
20 to 10,000 Hz |
Polar Pattern |
Supercardioid, rotationally symmetrical about microphone axis |
Output Level |
Open Circuit Voltage: -64 dBV/Pa* (0.6 mV), *1 Pa = 94 dB SPL |
|
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
-
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
-
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
-
Neodymium magnet for high signal–to–noise output
-
Hardened steel mesh grille that resists wear and abuse
-
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
-
Minimally effected by varying load impedance
-
Legendary Shure quality and reliability
Transducer |
(Moving Coil, with Neodymium Magnet) Dynamic |
Polar Pattern |
Supercardioid |
Frequency Response |
50 Hz - 16 kHz |
Maximum Input Sound Level |
not specified by manufacturer |
Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
Output Impedance |
150 Ohms (290 Ohms Actual) |
Output Connectors |
XLR-3 Type |
Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
Weight |
9.92 oz. (278 g) |
| The legendary Shure vocal mic is tuned to accentuate the warmth and clarity of lead and back-up vocals. Consistently the first choice of performers around the globe. The Shure SM58? is a unidirectional (cardioid) dynamic vocal microphone designed for professional vocal use in live performance, sound reinforcement, and studio recording. A highly effective, built-in, spherical filter minimizes wind and breath "pop" noise. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The SM58 has a tailored vocal response for a sound which is a world standard. Rugged construction, a proven shock mount system, and a steel mesh grille ensure that even with rough handling, the SM58 will perform consistently. Outdoors or indoors, singing, speech - the SM58 is the overwhelming choice of professionals.
- Frequency response tailored for vocals, with brightened midrange and bass rolloff
- Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise
- Pneumatic shock-mount system cuts down handling noise
- Effective, built-in spherical wind and pop filter
- Supplied with break-resistant stand adapter which rotates 180 degrees
- Lengendary Shure quality, ruggedness and reliability
- Cardioid (unidirectional) dynamic
- Frequency response: 50 to 15,000 Hz
Frequency Range |
50 Hz to 15 kHz |
Impedance |
150 Ohms |
Sensitivity |
-57.5 dBV/Pa at 1 kHz |
|
Reviews
There are no reviews yet.