INTER-M RM-01 Remote Microphone

129.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: RM-01 Category:
Unidirectional Dynamic Microphone Remote Chime Switch Mic ON/OFF Switch 2 Push Buttons for Easy Operation     RM-01 Input Sensitivity / Impedance 75dB±3dB (0dB=1V/µber at 1,000Hz), 600ohm Frequency Response 100Hz~18kHz Type Moving Coil Dynamic Directional Characteristic Unidirectional Weight 3lbs. 1.4kg Dimensions 3.5(W) X 1.8(H) X 5.2(D) inches 90(W) x 45(H) x 133(D) mm *Specifications and […]

 

Read more

  • Unidirectional Dynamic Microphone
  • Remote Chime Switch
  • Mic ON/OFF Switch
  • 2 Push Buttons for Easy Operation
 

 

RM-01

Input Sensitivity / Impedance

75dB±3dB (0dB=1V/µber at 1,000Hz), 600ohm

Frequency Response

100Hz~18kHz

Type

Moving Coil Dynamic

Directional Characteristic

Unidirectional

Weight

3lbs.
1.4kg

Dimensions

3.5(W) X 1.8(H) X 5.2(D) inches
90(W) x 45(H) x 133(D) mm

*Specifications and design subject to change without notice for improvements.

Weight 1.40 kg

Reviews

There are no reviews yet.

Be the first to review “INTER-M RM-01 Remote Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

INTER-M RM-01 Remote Microphone removeAKG C 451B - Condenser cardioid microphone removeRCF BM 3014 Paging Microphone removeSHURE SM 58LCE - Vocal Microphone 50Hz to 15kHz removeAKG SE300B - Preamp unit removeAKG C 430 - Cardioid Condenser Microphone remove
NameINTER-M RM-01 Remote Microphone removeAKG C 451B - Condenser cardioid microphone removeRCF BM 3014 Paging Microphone removeSHURE SM 58LCE - Vocal Microphone 50Hz to 15kHz removeAKG SE300B - Preamp unit removeAKG C 430 - Cardioid Condenser Microphone remove
ImageAKG C 430 condenser microphone
SKURM-01C 451B14320135SM58LCESE 300BC 430
Rating
Price 129.00 incl. GR VAT 347.22 incl. GR VAT133.90 incl. GR VAT 122.00 incl. GR VAT 178.00 incl. GR VAT 156.00 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityIn stockIn stockIn stockIn stockAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Unidirectional Dynamic Microphone
  • Remote Chime Switch
  • Mic ON/OFF Switch
  • 2 Push Buttons for Easy Operation
 

 

RM-01
Input Sensitivity / Impedance 75dB±3dB (0dB=1V/µber at 1,000Hz), 600ohm
Frequency Response 100Hz~18kHz
Type Moving Coil Dynamic
Directional Characteristic Unidirectional
Weight 3lbs.
1.4kg
Dimensions 3.5(W) X 1.8(H) X 5.2(D) inches
90(W) x 45(H) x 133(D) mm
*Specifications and design subject to change without notice for improvements.
This new mic is a performance / price breakthrough. It has an acoustically identical version of the legendary CK1 capsule that is permanently mounted. This combination can handle high output transients as well as subtle harmonics. Also included are switchable 75 and 150Hz 12dB per octave rolloff, and switchable -10 & -20 dB input pad. It is a single pattern (cardioid), and has a frequency response of 20 to 20kHz with 135 dB SPL. Requires 12 to 48V phantom power. Kit comes with bag, windscreen and clip. For more than twenty years, the AKG C 451 with the CK 1 condenser capsule was a standard item on tour riders for sound companies and required by leading engineers for studio projects. When it was discontinued in 1993, there was still a big demand for this microphone. AKG now has an updated version of this classic microphone. The new C 451B provides the same frequency response as the legendary CK 1 with the same slight high-end rise that was the signature of the original. This characteristic makes the C 451B an ideal tool for capturing signals rich in transients such as acoustic guitars, snare drums, hi-hats and for overhead micing of drum kits. The C 451B?s response eliminates the need for heavy EQ on these instruments. The new C 451B has also benefited from newer electronic technology with machine soldering and surface-mount components that improve noise performance and make the microphone much more reliable than the original. Other special features include switchable 10 dB and 20 dB preattenuation pads and switchable low cut filters at 75 Hz or 150 Hz. Standard accessories included are an SA 40 stand adaptor, W 90 windscreen and a rugged zippered bag. Each C 451B also comes with an individual frequency response printout. Three-year warranty. Specification Polar pattern: cardioid Frequency range: 20?20,000 Hz Sensitivity: 9 mV/Pa (-41 dBV re 1 V/Pa) Max. SPL for 0.5 % THD: 135/145/155 dB SPL (-0/-10/-20 dB) Equivalent noise level: 18 dB-A to DIN 45 412 Signal/noise ratio (A-weighted): 76 dB Preattenuation pad: switchable, 0, -10,-20 dB Bass cut filter: switchable to flat or 12 dB/octave at 75 Hz or 150 Hz Electrical impedance: Recommended load impedance: >1.000 Ohms Power requirement: 9?52 Volt phantom power to DIN 45 596/IEC 268-15 Current consumption: Connector: 3-pin male XLR Finish: satin nickel plated Size: dia.: 190 mm (0.7 in.); length: 160 mm (6.3 in.) Net/shipping weight: 125/760 g (4.4 oz./1.7 lbs.) Standard accessories: W 90 windscreen, SA 40 stand adapter

Unidirectional cardoid-pattern microphone with high sensitivity and extended frequency response. 
Factory-fitted for direct connection to the AM4000 series, PR4092, EL2126 CD sintoamplifier and 1000 series amplifiers.

General Specs

  • Plastic body with 320 mm gooseneck
  • Pushbutton for momentary microphone activation
  • Connections on screw terminals inside

Specifications

  • Type:Desktop paging microphone with dinamyc capsule
  • Directivity:Unidirectional - Cardioid
  • Frequency Response:100Hz ÷ 12 kHz
  • Microphone Sensitivity:- 71 dB ± 3
  • Output impedance:500Ω
  • Signal/noise ratio:40dB
  • Connector:3 pole XLR

Size/Weight

  • Height:270 / 10.62mm/inch
  • Width:200 / 7.87mm/inch
  • Depth:132 / 5.20mm/inch
  • Net Weight:6 / 3.53kg/lbs
The legendary Shure vocal mic is tuned to accentuate the warmth and clarity of lead and back-up vocals. Consistently the first choice of performers around the globe. The Shure SM58? is a unidirectional (cardioid) dynamic vocal microphone designed for professional vocal use in live performance, sound reinforcement, and studio recording. A highly effective, built-in, spherical filter minimizes wind and breath "pop" noise. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The SM58 has a tailored vocal response for a sound which is a world standard. Rugged construction, a proven shock mount system, and a steel mesh grille ensure that even with rough handling, the SM58 will perform consistently. Outdoors or indoors, singing, speech - the SM58 is the overwhelming choice of professionals.
  • Frequency response tailored for vocals, with brightened midrange and bass rolloff
  • Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise
  • Pneumatic shock-mount system cuts down handling noise
  • Effective, built-in spherical wind and pop filter
  • Supplied with break-resistant stand adapter which rotates 180 degrees
  • Lengendary Shure quality, ruggedness and reliability
  • Cardioid (unidirectional) dynamic
  • Frequency response: 50 to 15,000 Hz
Frequency Range 50 Hz to 15 kHz
Impedance 150 Ohms
Sensitivity -57.5 dBV/Pa at 1 kHz

Transformerless Power/Output Module ? The SE 300 B is used with all AKG Blue Line capsules and operates from 9 ? 52 V phantom power. The 3-position switch allows selection of linear response, -10 dB preattenuation and 12-dB-per-octave 75 Hz low-cut filter. A stand adapter is included.

Specifications

Polar pattern: hypercardioid/directional
Frequency range: 20?20,000 Hz
Sensitivity: 25 mV/Pa (-32 dBV)
Max. SPL for 1 % THD: 124/134 dB
Equivalent noise level: 17 dB-A
Signal/noise ratio (A weighted): 77 dB
Preattenuation pad: -10 dB, switchable Bass cut filter: 12 dB/octave at 75 Hz
Electrical impedance: 200 Ohms
Recommended load impedance: >1,000 Ohms
Power requirement: 9 to 52 V phantom power to DIN 45 596
Current consumption:

Specifically designed for cymbal and overhead miking, the frequency response of the C 430 ensures a unique crisp sound. With its extremely compact external dimensions, this microphone will keep a low profile on the drum kit without compromising audio quality. Response is 20-20kHz, with 126dB max SPL, and requires phantom power. Specifications Polar Pattern: cardioid Frequency Response: 20?20.000 Hz Sensitivity: 7 mV/Pa=-43 dBV to 1 V/Pa Max. SPL for 1% / 3% THD: 126/130 dB SPL Equivalent Noise Level: 33 dB to DIN 45 412 Electrical Impedance: 200 ohms Recommended Load Impedance: >2.000 ohms Power Requirement: 9 to 52 volts universal phantom power Current Consumption: approx. 2 mA Connector : 3-pin XLR Cable Length: 1.5 m (5 ft.) Finish: matte black Size : dia.: 19 mm (0.7 in.), length: 79 mm (3.1 in.) Net / Shipping Weight: 23/192 g (0.8/6,8 oz.) Optional Accessorires: B15, B18
Weight1.40 kg0.76 kg6.00 kg0.50 kg0.50 kg0.19 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.40 kg
Weight 0.76 kg
Weight 6.00 kg
Weight 0.50 kg
Weight 0.50 kg
Weight 0.19 kg