INTER-M VAMS-0808 A/V MATRIX SYSTEM

30%
All products by InterM

€435.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation €
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: VAMS-0808 Category:
*video & audio controlvams-0808 is a kind of multiple audio/video in & out control system.the best product covering a/v systemconfiguration and simultaneously can select input audio & video signal *possible to link to pc using rs-232c data communication.built inrs-232c data communication and permits pc base software control that supplied from inter-m with presetting and other […]

 

Read more

*video & audio controlvams-0808 is a kind of multiple audio/video in & out control system.the best product covering a/v systemconfiguration and simultaneously can select input audio & video signal

*possible to link to pc using rs-232c data communication.built inrs-232c data communication and permits pc base software control that supplied from inter-m with presetting and other great additional functions

*video switching function possible to set off & select condition of all output image

*switch locking function to protect false-operation vams-0808 allows various setting modes. so it is very easy to happen the alternation of fixed selection mode. to prevent false-operation it you may set a locking mode

*high frequency feature and low cross talk (?0.5db)frequency feature and cross talk are the most important factor in video / audio matrix switcher. vams-0808 has wide band audio & video high frequency response and low cross talk at excellent function

*visible in/out display condition very convenient display of each out / in video & audio source

*parallel connection function allows system extension to multiple sets

*audio/video input & output with a/v thermal noise protection

VIDEO

Video Input

VS or VBS 1.0Vp-p 75Ω, 8CH, BNC

Video Output

VS or VBS 1.0Vp-p 75Ω, 8CH, BNC

Frequency Response

Below ±0.5dB(7MHz)

S/N

-60dB

Crosstalk

-60dB

Audio

Audio Input

2.2Vp-p, High Impedance Unbal/RCA

Audio Output

2.2Vp-p, High Impedance Unbal/RCA

T.H.D

Below 0.1(20Hz-20kHz)

Frequency Response

Below -3dB

S/N

90dB

Crosstalk

-90dB

CONTORL CPU MICOM

Interface

RS-232C

Operating Temperature

-10℃~+40℃

Storage Temperature

-20℃~+60℃

Operating Humidity

Below 90% RH

Power Source

100-120VAC or 220-240VACl 50/60Hz

(supplied AC mains transformer depends on country requirements)

Weight

5kg/11lb

Dimensions

482(W)x88(H)x220(D)㎜/19(W)x3.5(H)x8.7(D)in

Weight 5.00 kg

Reviews

There are no reviews yet.

Be the first to review “INTER-M VAMS-0808 A/V MATRIX SYSTEM”

Your email address will not be published. Required fields are marked *

Quick Comparison

INTER-M VAMS-0808 A/V MATRIX SYSTEM removeJBL CSM-21 PUBLIC ADDRESS MIXER removeDAP AUDIO D2352 IMIX-5.3 5 Channel 4U install mixer, 3 zones removeRane AM2 Automixer removeLD SYSTEMS LDZONE622 ZONE 622 - 19" 2-Zone Mixer 1U removeBIAMP MA 35 Mixer Amplifier 100V/35W remove
NameINTER-M VAMS-0808 A/V MATRIX SYSTEM removeJBL CSM-21 PUBLIC ADDRESS MIXER removeDAP AUDIO D2352 IMIX-5.3 5 Channel 4U install mixer, 3 zones removeRane AM2 Automixer removeLD SYSTEMS LDZONE622 ZONE 622 - 19" 2-Zone Mixer 1U removeBIAMP MA 35 Mixer Amplifier 100V/35W remove
ImageAM2
SKUVAMS-0808CSM-21D2352134.401LDZONE622H06AP00007
Rating
Price €435.00 incl. GR VAT €659.00 incl. GR VAT €355.87 incl. GR VAT€891.45 incl. GR VAT €277.68 incl. GR VAT €255.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionThe Rane AM2 is both an 8 channel, gain-sharing automatic mic mixer and simultaneously a Rane RAD. Use it as a standalone mic-only mixer, add more gain-shared mics using up to seven additional AM2 Automixers, and/or use the RAD Port to transport the mic mix to Rane's HAL system
Content

*video & audio controlvams-0808 is a kind of multiple audio/video in & out control system.the best product covering a/v systemconfiguration and simultaneously can select input audio & video signal

*possible to link to pc using rs-232c data communication.built inrs-232c data communication and permits pc base software control that supplied from inter-m with presetting and other great additional functions

*video switching function possible to set off & select condition of all output image

*switch locking function to protect false-operation vams-0808 allows various setting modes. so it is very easy to happen the alternation of fixed selection mode. to prevent false-operation it you may set a locking mode

*high frequency feature and low cross talk (?0.5db)frequency feature and cross talk are the most important factor in video / audio matrix switcher. vams-0808 has wide band audio & video high frequency response and low cross talk at excellent function

*visible in/out display condition very convenient display of each out / in video & audio source

*parallel connection function allows system extension to multiple sets

*audio/video input & output with a/v thermal noise protection

VIDEO

Video Input

VS or VBS 1.0Vp-p 75Ω, 8CH, BNC

Video Output

VS or VBS 1.0Vp-p 75Ω, 8CH, BNC

Frequency Response

Below ±0.5dB(7MHz)

S/N

-60dB

Crosstalk

-60dB

Audio

Audio Input

2.2Vp-p, High Impedance Unbal/RCA

Audio Output

2.2Vp-p, High Impedance Unbal/RCA

T.H.D

Below 0.1(20Hz-20kHz)

Frequency Response

Below -3dB

S/N

90dB

Crosstalk

-90dB

CONTORL CPU MICOM

Interface

RS-232C

Operating Temperature

-10℃~+40℃

Storage Temperature

-20℃~+60℃

Operating Humidity

Below 90% RH

Power Source

100-120VAC or 220-240VACl 50/60Hz

(supplied AC mains transformer depends on country requirements)

Weight

5kg/11lb

Dimensions

482(W)x88(H)x220(D)㎜/19(W)x3.5(H)x8.7(D)in

The JBL Commercial CSM-21 offers fixed I/O, pre-configured architecture, full stereo or mono operation, flexible routing and control of multiple audio sources, simple front-panel configuration and control without the need for a computer, compatibility with the CSR wall controllers, compatibility with the CSPM paging microphones, and optional duplication of audio channels to another device via a Cat5 cable. The CSM-21 features two stereo music inputs with gain control and clip LEDs, and one stereo output with an active crossover and a dedicated subwoofer output.

• Master outputs with 3 way tone control • Special front input for phone/mp3 devices • Zone control for 3 balanced outputs • 1 Mic, 7 Line, 2 Phono inputs The IMIX-5.3 is a basic 3 zone control mixer. It has a logical design and all functions are very clear and easy to control. Each channel has 3 output buttons to route the channel to your desired area/zone. All outputs have their own EQ settings and with the PFL function you can monitor each area/zone with a pair of headphones. At the front it has direct inputs for microphone, line and a phone/mp3 device. Specifications Input channels: 1 x Microphone, combo XLR/Jack 7 x Line, RCA 2 x Phono, RCA 1 x Phone, 3,5mm jack Output channels: 3 x Master (Balanced), XLR/RCA 1 x Headphones, 6.3mm Jack Master EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB Mic EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB Frequency response: 20Hz – 20Khz T.H.D.:Χαρακτηριστικά:Inputs:Gain-Sharing Automatic Mic Mixing Eight XLR Inputs with Level controls & Sig/OL indicators Each can be Mic, Mic with 48V phantom, or Line-level Add up to 64 more gain-sharing inputs by cascading AM2 Automixers Add other audio sources, line inputs and remote controls by connecting to HAL systemOutputs (all mono)XLR Main with Mic/Line switch, Level control & Sig/OL Rane RAD and Cascade IN RJ-45 Ports Cascade In Port connects up to seven additional Rane AM2 mixers, (eight units total) RAD Port may send Output to HAL (DSP/control). It is possible to cascade the AM2 mix into Halogen's Gain-Sharing Auto Mixer or Room Combine Processor DSP, so that all mics connected to HAL may gain-share

LD Systems ZONE 622 2-Zone Mixer

The ZONE 622 is a particularly compact 1U zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The device has all the essential functions, an input for an external emergency announcement system with its own volume control, and a connection to the remote-controlled switching mute. The ZONE 622 is suitable as a sound system for separate zones in restaurants, clubs, hotels, fitness centres, and for presentations.

The two balanced microphone channels with stereo jack inputs are equipped with controls for Gain, Talkover volume, Talkover attenuation, 12V phantom power and a shared 2-band EQ. The line channels 1 and 2 can also be used to connect unbalanced microphones, and channel 6 is specially designed for balanced FOH signals. The stereo input channels of the ZONE 622 have a Cue button and volume control signal display, and the channels 1-5 have an additional gain trimmer. Furthermore, the zone mixer has a 3.5 mm mini jack input and a USB port , that is used as a Stereo Input and Output (Recording Out). So you can use the ZONE 622 as an external audio interface. 

The stereo and mono output sections have their own meters, 2-band EQ, trimmer for adjusting the maximum output level, as well as electronically balanced jack plugs and terminal block connectors. In addition, the stereo section has unbalanced RCA jacks. An adjustable headphone jack for previewing and a recording output complete the equipment for the ZONE 622.

Product type Mixers
Type Installations
Number of Zones 2 (Master, Zone)
Type stereo
Installation Height 1 U
Total Input Channels 8 (2x Mic, 2x Mic/Line, 3x Line, 1x FOH)
Frequency response 20 - 40000 Hz
Microphone channels 2 (with phantom power 12 V)
Microphone Channel Connections 6.3 mm stereo jack (balanced)
Microphone channel controls 1 x EQ Hi , 1 x EQ Low , 1 x Talk Over Damp , 1 x Talk Over Level , Gain , On / Off
Microphone Channels Display Elements On-LED
Microphone Channels Input Impedance 4 kOhm
Microphone Channels Input Sensitivity 6.1 mV
Microphone Channels THD 0.08%
Line / Microphone Channels 2
Line / microphone input connectors 2 x RCA , 3.5 mm stereo jack (input 1) , 6.3 mm stereo jack (balanced)
Line / microphone channel controls Cue , level , mic/lline , Trim
Line / Microphone Display Elements Cue-LED , Signa-LED
Line Channels 3
Line input connectors Input 3-4: 2 x RCA , Input 5: 2 x RCA + USB
Line Channel Controls Cue , level , Trim
Line Channel Display Elements Cue-LED , Signa-LED
Line Channel Input Impedance 4 kOhm
Line Channels Input Sensitivity 1.5 V
Line Channels THD 0.03%
input sensitivity AUX/Line 3 V
FOH Channels 1
FOH Input Connections 6.3 mm stereo jack (2 x balanced)
FOH Input Controls Cue , level
FOH Input Display Elements Cue-LED , Signa-LED
Line outputs 3 (Master - Stereo, Zone - Mono, Rec - Stereo)
Output Connectors Master 6.3 mm stereo jack (2 x balanced) , RCA (x2) , terminal block
Master Controls EQ Hi , EQ Low , level , Max. Level
Master Display Elements 5-Segment Level Meter
Master Output Levels (balanced) 24 dBu , (unbalanced) 18 dBu
Zone Output Connections 6.3 mm stereo jack (balanced) , terminal block
Zone Controls EQ Hi , EQ Low , level , Max. Level , Source Input 1-5/Mix
Zone Display Elements 5-Segment Level Meter
Zone Output Levels 24 (balanced/ unbalanced) dBu
Output Connections Rec 2 x RCA
Headphones ouput 1
Headphone Out Port 6.3 mm TRS
Headphone Output Controls Cue Volume
Headphone Output Voltage (@ 32 Ohm) 1.25 V
Additional Inputs 2 (Emergency Input, Output Mute)
Connections Additional Inputs terminal block
Additional Input Controls Level Emergency Input
Additional Controls power switch
Additional Display Elements Power-LED
Operating voltage 220 - 250 V AC, 50 Hz
Mains connector IEC power connector
Power consumption 18 W
Fuse T 500 mAL / 250 V
Width 485 mm
Height 44 mm
Depth 179 mm
Weight 2,4 kg
Accessories (included) Power cord , terminal blocks

The APart MA35 is probably the most complete and compact 35 watt 100 Volt mixing desktop amplifier. The amplifier has 4 inputs: 2 MIC, 1 MIC-LINE and 1LINE. The microphone inputs can have phantom power via an internal jumper. A two step priority system is standard: MIC1 can have voice activated priority (VOX) that mutes all other inputs. This VOX mute can be switched off via an internal jumper. The contact closure (via DIN5 on MIC1 or Euroblock on MIC1-2) will activate the chime and will mute input 3 (MIC3/LINE3) and 4.     The pre-amp out, power-amp input allows you to insert extra signal processors or to link the signal to other power amplifiers. Further the MA35 is equipped with a bass - treble tone control, a record output and limiter circuit on the output to avoid clipping. MA35 can operate with a 12V and 230V power supply. The amplifier has been build into a compact and sturdy metal housing. A 19” mounting bracket (Ref: MA35-19) is available as an option for rack mounting.
Weight5.00 kg2.00 kg2.50 kg1 kg2.40 kg4.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.00 kg
Weight 2.00 kg
Weight 2.50 kg
Weight 1 kg
Weight 2.40 kg
Weight 4.00 kg

Related products