INTER-M VAMS-0808 A/V MATRIX SYSTEM

30%
All products by InterM

€435.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation €
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: VAMS-0808 Category:
*video & audio controlvams-0808 is a kind of multiple audio/video in & out control system.the best product covering a/v systemconfiguration and simultaneously can select input audio & video signal *possible to link to pc using rs-232c data communication.built inrs-232c data communication and permits pc base software control that supplied from inter-m with presetting and other […]

 

Read more

*video & audio controlvams-0808 is a kind of multiple audio/video in & out control system.the best product covering a/v systemconfiguration and simultaneously can select input audio & video signal

*possible to link to pc using rs-232c data communication.built inrs-232c data communication and permits pc base software control that supplied from inter-m with presetting and other great additional functions

*video switching function possible to set off & select condition of all output image

*switch locking function to protect false-operation vams-0808 allows various setting modes. so it is very easy to happen the alternation of fixed selection mode. to prevent false-operation it you may set a locking mode

*high frequency feature and low cross talk (?0.5db)frequency feature and cross talk are the most important factor in video / audio matrix switcher. vams-0808 has wide band audio & video high frequency response and low cross talk at excellent function

*visible in/out display condition very convenient display of each out / in video & audio source

*parallel connection function allows system extension to multiple sets

*audio/video input & output with a/v thermal noise protection

VIDEO

Video Input

VS or VBS 1.0Vp-p 75Ω, 8CH, BNC

Video Output

VS or VBS 1.0Vp-p 75Ω, 8CH, BNC

Frequency Response

Below ±0.5dB(7MHz)

S/N

-60dB

Crosstalk

-60dB

Audio

Audio Input

2.2Vp-p, High Impedance Unbal/RCA

Audio Output

2.2Vp-p, High Impedance Unbal/RCA

T.H.D

Below 0.1(20Hz-20kHz)

Frequency Response

Below -3dB

S/N

90dB

Crosstalk

-90dB

CONTORL CPU MICOM

Interface

RS-232C

Operating Temperature

-10℃~+40℃

Storage Temperature

-20℃~+60℃

Operating Humidity

Below 90% RH

Power Source

100-120VAC or 220-240VACl 50/60Hz

(supplied AC mains transformer depends on country requirements)

Weight

5kg/11lb

Dimensions

482(W)x88(H)x220(D)㎜/19(W)x3.5(H)x8.7(D)in

Weight 5.00 kg

Reviews

There are no reviews yet.

Be the first to review “INTER-M VAMS-0808 A/V MATRIX SYSTEM”

Your email address will not be published. Required fields are marked *

Quick Comparison

INTER-M VAMS-0808 A/V MATRIX SYSTEM removeTASCAM MZ-372 Industrial-grade Audio 2 Zone Mixer removeLD SYSTEMS LDZONE624 ZONE 624 - 19" 4-Zone Mixer 3U removeLD SYSTEMS LDMS828 MS 828 19" 8-Channel Splitter/Mixer removeINTERM L-2400 AMPLIFIER 2X750W removeINTERM L-1800 AMPLIFIER 2X600W remove
NameINTER-M VAMS-0808 A/V MATRIX SYSTEM removeTASCAM MZ-372 Industrial-grade Audio 2 Zone Mixer removeLD SYSTEMS LDZONE624 ZONE 624 - 19" 4-Zone Mixer 3U removeLD SYSTEMS LDMS828 MS 828 19" 8-Channel Splitter/Mixer removeINTERM L-2400 AMPLIFIER 2X750W removeINTERM L-1800 AMPLIFIER 2X600W remove
Image
SKUVAMS-0808MZ-372LDZONE624LDMS828L-2400L-1800
Rating
Price €435.00 incl. GR VAT €499.00 incl. GR VAT €510.00 incl. GR VAT €230.00 incl. GR VAT €1,198.00 incl. GR VAT €1,186.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Only 2 left in stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityIn stockAvailable on backorderAvailable on backorderOnly 2 left in stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

*video & audio controlvams-0808 is a kind of multiple audio/video in & out control system.the best product covering a/v systemconfiguration and simultaneously can select input audio & video signal

*possible to link to pc using rs-232c data communication.built inrs-232c data communication and permits pc base software control that supplied from inter-m with presetting and other great additional functions

*video switching function possible to set off & select condition of all output image

*switch locking function to protect false-operation vams-0808 allows various setting modes. so it is very easy to happen the alternation of fixed selection mode. to prevent false-operation it you may set a locking mode

*high frequency feature and low cross talk (?0.5db)frequency feature and cross talk are the most important factor in video / audio matrix switcher. vams-0808 has wide band audio & video high frequency response and low cross talk at excellent function

*visible in/out display condition very convenient display of each out / in video & audio source

*parallel connection function allows system extension to multiple sets

*audio/video input & output with a/v thermal noise protection

VIDEO

Video Input

VS or VBS 1.0Vp-p 75Ω, 8CH, BNC

Video Output

VS or VBS 1.0Vp-p 75Ω, 8CH, BNC

Frequency Response

Below ±0.5dB(7MHz)

S/N

-60dB

Crosstalk

-60dB

Audio

Audio Input

2.2Vp-p, High Impedance Unbal/RCA

Audio Output

2.2Vp-p, High Impedance Unbal/RCA

T.H.D

Below 0.1(20Hz-20kHz)

Frequency Response

Below -3dB

S/N

90dB

Crosstalk

-90dB

CONTORL CPU MICOM

Interface

RS-232C

Operating Temperature

-10℃~+40℃

Storage Temperature

-20℃~+60℃

Operating Humidity

Below 90% RH

Power Source

100-120VAC or 220-240VACl 50/60Hz

(supplied AC mains transformer depends on country requirements)

Weight

5kg/11lb

Dimensions

482(W)x88(H)x220(D)㎜/19(W)x3.5(H)x8.7(D)in

The MZ-372 allows multiple audio sources (19 total) to be mixed, muted, and routed to 2 redundant outputs, controlled by familiar volume sliders and assignment buttons. Input signals can be inserted via 6 audio channels, each consisting of 2 sets of unbalanced RCA stereo pairs, and 6 XLR inputs for a total of 12 sets of RCA inputs and 6 XLR inputs. In addition, channels 2/3/4 can be set to accommodate phono-level signals for use with a turntable. Lastly, and located conveniently on the front panel, one additional XLR input is available driving a studio quality mic preamp and ducking circuit for easy voiceover and announcement work.

Multiple Zone Outputs

Twin outputs each feature a combination of balanced XLR or RCA unbalanced connectors for easy integration into virtually any audio system. This flexibility allows combinations of microphones, CD/DVD/Blu-ray players, instruments - or any other audio source - to be selected or muted, and sent simultaneously to the dual outputs, each with it’s own volume control. Finally, the convenient "Talkover” function will automatically lower any mixed channel source so the microphone connected to the front panel can easily be can be heard in whichever zones you choose.

Easy, Immediate Control

Familiar volume sliders, switches/buttons, EQ knobs, and mute buttons make the MZ-372 simple and fast to operate and set up. There is even a master recording stereo output, which can send audio to an external recorder which makes event or music performance capturing easy. The Booth outputs provide another stereo feed with independent control for additional monitoring.

  • Maximum flexibility for audio routing, input selection, and multiple redundant output flow, perfect for integrator, musical instrument, and residential applications
  • Multiple inputs include 12 sets of stereo RCA-type, 6 selectable mic/line XLR, and a dedicated front-panel XLR mic input; 19 total input "sets”
  • Channel audio sources can easily be selected, muted, and contoured via simple volume sliders, toggle switches/buttons, and knobs
  • Two redundant output channels each with stereo XLR balanced and unbalanced RCA-type connectors; each with separate volume control
  • Separate stereo booth, recording, and headphone outputs each with independent control
  • One additional mic-compatible XLR input on the front panel with "Talkover” function automatically lowering source audio
  • Independent three-band EQ per each of the 5 channels and a two-band EQ on the additional front panel microphone input
  • Compact 3U rack mount design
LD Systems ZONE 624 4-Zone Mixer The ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote-controlled switching mute. Due to its extensive connectivity the ZONE 624 is the extremely flexible control centre solution for PA systems in food outlets, clubs, hotels, fitness centres, and many other areas. The two balanced microphone inputs have a shared 3-band EQ, 12V phantom power and Talkover functions; the Talkover attenuation can be individually set for all zone outputs on the back of the unit. The 6 stereo input channels of the ZONE 624 are equipped with gain control, signal and peak LEDs, 45 mm faders, Cue buttons and RCA connections; channel 6, in addition with balanced TRS inputs for FOH signals. The device also has a switchable Aux input via 3.5mm mini jack and a USB port, that is used as a stereo input and output (recording out) and turns the ZONE 624 into an external audio interface. The master section outputs are electronically balanced and use XLR connectors and terminal block connectors. The stereo zone also has unbalanced RCA connectors. The maximum output level for all of the zones can be individually set. The three mono outputs of the ZONE 624 each have a 2-band EQ, a selectable 100 Hz high pass filter, and a MIC mute switch with a level indicator; the inputs 1-6 or the stereo master signal can be selected as a source. The stereo output is equipped with a 3-band EQ, a control for the Talkover sensitivity and two LED chain level meters. Furthermore, the ZONE 624 has a recording output and a controllable PFL headphone jack for previewing.
  • Type: stereo
  • Number of Zones: 4 (Master, Zone A-C)
  • Installation Height: 3U
  • Total Input Channels: 8 (2x Mic, 1x AUX/Line, 2x Phono/Line, 2x Line, 1x FOH/Line
  • Frequency Response: 20 - 40.000 Hz
  • Microphone Channels: 2 (with phantom power 12 V)
  • Microphone Channels Connections: 2X 6.3 mm jack (balanced), 1x XLR / 6.3 mm jack (Combo)
  • Microphone Channel Controls: 2x Gain, 2x On/Off, 1 x EQ Hi, 1x EQ Mid, 1 x EQ Low, 1x Talkover
  • Microphone Channels Display Elements: On-LED
  • Microphone Channels Input Impedance: 4 kOhm
  • Microphone Channels Input Sensitivity: 4.5 mV
  • Microphone Channels THD: 0,08 %
  • Line Channels: 6 (Input 1: Aux/Line, Input 2 + 5: Line/Phono, Input 3: USB/Line  4: Line, Input 6: Line/FOH
  • Line Input Connectors: Input 1: 2 x RCA + 3.5 mm stereo jack, input 2.4 5: 2 x RCA, input 3: 2 x RCA, input 6: 4 x RCA + 2 x 6.3 mm jack
  • Line Channel Controls: Gain, AUX enable, Cue, Level, 2x Phono/Line, FOH On
  • Line Channels Display Elements: Signal/0 dB-LED, Cue-LED
  • Line Channel Input Impedance: 6 Kohm (Phono 50 kOhm)
  • Line Channels Input Sensitivity: 2,1 V (Phono 25 mV)
  • Line Channels THD: 0,02 % (Phono 0,05%)
  • input sensitivity AUX/Line (3.5 mm stereo jack): 3 V
  • Line Outputs: 5 (Master - Stereo, 3x Zone - Mono, Rec - Stereo)
  • Master Output Connectors: 2 x XLR (balanced), RCA (2 x), Terminal Block
  • Master Controls: Level, EQ Hi, EQ Mid, EQ Low, Max. Level, T/O Sensitivity, T/O Damping
  • Master Display Elements: 2 x 10 segment level meter
  • Master Output Levels: 24 dBu (balanced), 17 dBu (unbalanced)
  • Zone Output Connections: XLR (balanced), Terminal Block
  • Zone Controls: Level, Source, Cue, EQ Hi, EQ Low, Max Level, 100 Hz High Pass, Include Mic, T/O Damp
  • Zone Display Elements: 5-segment level meter
  • Zone Output Levels: 24 dBu (balanced/ unbalanced)
  • Output Connections Rec: 2 x RCA
  • Headphone Output: 1
  • Headphone Out Port: 6.3 mm jack stereo
  • Headphone Output Controls: Cue Volume
  • Headphone Output Voltage: 2,5 V 32 Ohm
  • Additional Inputs: 2 (Emergency Input, Output Mute)
  • Additional Input Connections: Terminal Block
  • Additional Input Controls: Level Emergency Input
  • Emergency Input Sensitivity: 5 V
  • Additional Controls: power switch
  • Additional Display Elements: Power-LED
  • Operating Voltage: 220 - 250 V AC, 50 Hz
  • Power Socket: IEC power socket
  • Power Consumption (max.): 25 W
  • Fuse: T 500 mAL / 250 V
  • Dimensions (W x H x D): 485 x 132 x 210 mm
  • Accessories included: terminal blocks, power cable, operating instructions
LDMS828 - 19" Line Mixer 8 in 2 and Splitter 2 in 8 The LD Systems LDMS828 is a mixer, splitter, and booster amplifier in 19” rack format for flexible live and studio applications. The LDMS828 has one stereo and six mono channels with individual LED level metres; all inputs and outputs are electronically balanced. Two mono channels are equipped with stereo TRS sockets, the other connectors are XLR sockets. The stereo channel has individual volume controls for input and output and a link button for looping through the signal; each mono channel has volume and panorama controls as well as a button that toggles between the splitter and mixer functions. TheLDMS828 by LD Systems is impressive not only because of its practical features, but also because of its technical specifications. The broad frequency response of 5 - 40,000 Hz, a dynamic range of 85 dB, and the extremely low total harmonic distortion of 0.0008% guarantee maximum signal fidelity. The nominal working level of -10 dBV to +4 dBU makes the mixer/splitter suitable for connection to both professional and consumer equipment.
Product type
Mixers
Type
Installations
Channels
8
Mono input channels, line
6
Mono line input connectors
2 x 6.3 mm TS
Mono line input type
Electronically balanced
Stereo Line Input Channels
1
Stereo Line Input Connectors
2 x XLR
Stereo Line Input Type
Electronically balanced
Input impedance
(balanced) 50000 Ohm(s), (unbalanced) 25000 Ohm(s)
Max. input level
+ 21 dBu
Nominal working level
-10 dBV - +4 dBu
Mono output channels
6
Mono output connectors
2 x 6.3 mm TS
Mono output type
Electronically balanced
Stereo output channels
1
Stereo output connectors
1 x XLR
Stereo output type
Electronically balanced
Output impedance
(balanced) 60 Ohm(s), (unbalanced) 30 Ohm(s)
Max. output level
+22 dBu
Frequency response
5 - 40000 Hz
THD
0.0008 %
S/N Ratio
85 dB
Controls
Level Channel 1-6, Main Input Level, Main Link, Main Output Level, Power, Splitter/Mixer Channel 1-6
Indicators
In/Out Level Channel 1-6 (6 -segment), Input Level LED Indicator (6-segment), Output Level Indicator (6-segment), Power
Operating voltage
220 V AC - 240 V AC, 50-60 Hz
Mains connector
IEC power connector
Power consumption
15 W
Fuse
T 315 mAL, AC 250V
Width
483 mm
Height
44.5 mm
Depth
216 mm
Weight
3 kg
Accessories (included)
Power cord
     		L2400 750W-750W 4ohm (500W-500W 8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.L1800 600W-600W 4ohm (360W-360W 8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.
Weight5.00 kg4.00 kg6.40 kg3.00 kg15.60 kg15.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.00 kg
Weight 4.00 kg
Weight 6.40 kg
Weight 3.00 kg
Weight 15.60 kg
Weight 15.60 kg

Related products