INTER-M RM-05A 5 ZONE PAGING MICROPHONE

120.21 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Designed to operate exclusively with the PAM-340A the RM-05A will allow either individual selection of any combination of paging zones or the all-all facility. A flexible gooseneck microphone is supplied together with a three metre lead, complete with multiway connectors to connect the RM-05A to the host amplifier. Power: Supplied by the host PAM-340A. Dimensions: […]

 

Read more

Designed to operate exclusively with the PAM-340A the RM-05A will allow either individual selection of any combination of paging zones or the all-all facility. A flexible gooseneck microphone is supplied together with a three metre lead, complete with multiway connectors to connect the RM-05A to the host amplifier. Power: Supplied by the host PAM-340A. Dimensions: 195mm(w) x 60mm(h) x 205mm(d). Weight: 1.2 kg including microphone.

Weight 1.20 kg

Reviews

There are no reviews yet.

Be the first to review “INTER-M RM-05A 5 ZONE PAGING MICROPHONE”

Your email address will not be published. Required fields are marked *

Quick Comparison

INTER-M RM-05A 5 ZONE PAGING MICROPHONE removeAKG C 451B - Condenser cardioid microphone removeSHURE SM 58SE - Vocal Microphone with on-off 50Hz to 15kHz removeSHURE PGA52-XLR - Kick Drum Microphone 30Hz to 13kHz removeRCF BM 3014 Paging Microphone removeMASTER AUDIO CM238 Condenser Microphone Gun Cardioid remove
NameINTER-M RM-05A 5 ZONE PAGING MICROPHONE removeAKG C 451B - Condenser cardioid microphone removeSHURE SM 58SE - Vocal Microphone with on-off 50Hz to 15kHz removeSHURE PGA52-XLR - Kick Drum Microphone 30Hz to 13kHz removeRCF BM 3014 Paging Microphone removeMASTER AUDIO CM238 Condenser Microphone Gun Cardioid remove
ImageCM238-master audio microphone condenser artsound
SKURM-05AC 451BSM58SPGA52-XLR14320135CM238
Rating
Price 120.21 incl. GR VAT 347.22 incl. GR VAT 149.75 incl. GR VAT 165.12 incl. GR VAT133.90 incl. GR VAT 42.15 incl. GR VAT
Stock

Available on backorder

In stock

In stock

Only 5 left in stock

Available on backorder

Only 2 left in stock (can be backordered)

AvailabilityAvailable on backorderIn stockIn stockOnly 5 left in stockAvailable on backorderOnly 2 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Designed to operate exclusively with the PAM-340A the RM-05A will allow either individual selection of any combination of paging zones or the all-all facility. A flexible gooseneck microphone is supplied together with a three metre lead, complete with multiway connectors to connect the RM-05A to the host amplifier. Power: Supplied by the host PAM-340A. Dimensions: 195mm(w) x 60mm(h) x 205mm(d). Weight: 1.2 kg including microphone.

This new mic is a performance / price breakthrough. It has an acoustically identical version of the legendary CK1 capsule that is permanently mounted. This combination can handle high output transients as well as subtle harmonics. Also included are switchable 75 and 150Hz 12dB per octave rolloff, and switchable -10 & -20 dB input pad. It is a single pattern (cardioid), and has a frequency response of 20 to 20kHz with 135 dB SPL. Requires 12 to 48V phantom power. Kit comes with bag, windscreen and clip. For more than twenty years, the AKG C 451 with the CK 1 condenser capsule was a standard item on tour riders for sound companies and required by leading engineers for studio projects. When it was discontinued in 1993, there was still a big demand for this microphone. AKG now has an updated version of this classic microphone. The new C 451B provides the same frequency response as the legendary CK 1 with the same slight high-end rise that was the signature of the original. This characteristic makes the C 451B an ideal tool for capturing signals rich in transients such as acoustic guitars, snare drums, hi-hats and for overhead micing of drum kits. The C 451B?s response eliminates the need for heavy EQ on these instruments. The new C 451B has also benefited from newer electronic technology with machine soldering and surface-mount components that improve noise performance and make the microphone much more reliable than the original. Other special features include switchable 10 dB and 20 dB preattenuation pads and switchable low cut filters at 75 Hz or 150 Hz. Standard accessories included are an SA 40 stand adaptor, W 90 windscreen and a rugged zippered bag. Each C 451B also comes with an individual frequency response printout. Three-year warranty. Specification Polar pattern: cardioid Frequency range: 20?20,000 Hz Sensitivity: 9 mV/Pa (-41 dBV re 1 V/Pa) Max. SPL for 0.5 % THD: 135/145/155 dB SPL (-0/-10/-20 dB) Equivalent noise level: 18 dB-A to DIN 45 412 Signal/noise ratio (A-weighted): 76 dB Preattenuation pad: switchable, 0, -10,-20 dB Bass cut filter: switchable to flat or 12 dB/octave at 75 Hz or 150 Hz Electrical impedance: Recommended load impedance: >1.000 Ohms Power requirement: 9?52 Volt phantom power to DIN 45 596/IEC 268-15 Current consumption: Connector: 3-pin male XLR Finish: satin nickel plated Size: dia.: 190 mm (0.7 in.); length: 160 mm (6.3 in.) Net/shipping weight: 125/760 g (4.4 oz./1.7 lbs.) Standard accessories: W 90 windscreen, SA 40 stand adapterThe Shure SM58S Vocal Microphone features a cardioid dynamic vocal design well suited for professional vocal use in live performances, sound reinforcement, and studio recording. A built-in spherical filter minimizes wind and breath "pop" noise, while the cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The microphone offers durable construction, a high-quality internal shockmount system, and a steel mesh grille for withstanding rough handling. The SM58S is designed to perform consistently both outdoors and indoors and when used for singing or speech applications. The microphone features an integrated on/off switch and includes a microphone clip and a zippered pouch.
  • Pneumatic shockmount system cuts down handling noise
  • Effective, built-in spherical wind and pop filter
  • Supplied with break-resistant microphone clip that rotates 180 degrees
  • High quality, rugged, and reliable
  • Cardioid dynamic
  • Frequency response: 50 Hz to 15 kHz
Suggested Applications Lead Vocals Backup Vocals Harmonica
Frequency Range 50 Hz to 15 kHz
Impedance 150 Ohms
Sensitivity -57.5 dBV/Pa at 1 kHz

OVERVIEW

Cardioid dynamic kick drum mic with swivel mount and cable.

The PGA52 is a professional quality kick drum microphone with an updated industrial design that features a black metallic finish and grille offering an unobtrusive visual presence. Legendary Shure quality construction ensures exceptional performance in rigorous environments.

Additional design highlights include a swivel joint featuring a quick-release latch similar to bicycle component-locking technology for extremely quick and easy positioning.

FEATURES
  • Mountable microphone featuring swivel joint with quick-release latch for kick drum
  • Dynamic cartridge (does not require phantom power) with cardioid polar pattern
  • Tailored cartridge design for low-frequency clarity, including on bass amps
  • Includes PGA52, zipper pouch and user guide
  • XLR to XLR mic cable included

Unidirectional cardoid-pattern microphone with high sensitivity and extended frequency response. 
Factory-fitted for direct connection to the AM4000 series, PR4092, EL2126 CD sintoamplifier and 1000 series amplifiers.

General Specs

  • Plastic body with 320 mm gooseneck
  • Pushbutton for momentary microphone activation
  • Connections on screw terminals inside

Specifications

  • Type:Desktop paging microphone with dinamyc capsule
  • Directivity:Unidirectional - Cardioid
  • Frequency Response:100Hz ÷ 12 kHz
  • Microphone Sensitivity:- 71 dB ± 3
  • Output impedance:500Ω
  • Signal/noise ratio:40dB
  • Connector:3 pole XLR

Size/Weight

  • Height:270 / 10.62mm/inch
  • Width:200 / 7.87mm/inch
  • Depth:132 / 5.20mm/inch
  • Net Weight:6 / 3.53kg/lbs
MASTER AUDIO – CM238 Pen-type microphone
  • Directivity: condenser – ultra cardioid
  • Frequency response.: 100Hz – 16Khz
  • Sensitivity: -44db +/- 2db for short distance – -23db +/- 2db for long distance
  • Output impedance: 1K Ohm for short distance – 2.3K Ohm for long distance
  • Power supply: 1.5V / phanthom 48V
  • Dimensions: Ø 23 x 360 mm.
  • Windscreen, microphone holder and cable (4,5 m.) included
Weight1.20 kg0.76 kg0.50 kg0.80 kg6.00 kg0.15 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.20 kg
Weight 0.76 kg
Weight 0.50 kg
Weight 0.80 kg
Weight 6.00 kg
Weight 0.15 kg