Invotone CM610 PRO Electrect Condenser

No longer available!

49.60 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: 20INV002 Category:
Cartridge type Back-Electret Condenser Polar Pattern Cardioid – Uni-­directional Frequency Response 30Hz – 18KHz Input Sensitivity 38dB +/- 3dB (0dB = 1V / Pa at 1kHz) Output impedance 100 Ω +/- 30% at 1 KHz Input SPL 135dB (1kHz≤1% T.H.D) S / N Ratio 70dB Power Phantom Power (9 – 52 Vdc) Low frequency attenuation […]

 

Read more

Cartridge type Back-Electret Condenser
Polar Pattern Cardioid – Uni-­directional
Frequency Response 30Hz – 18KHz
Input Sensitivity 38dB +/- 3dB (0dB = 1V / Pa at 1kHz)
Output impedance 100 Ω +/- 30% at 1 KHz
Input SPL 135dB (1kHz≤1% T.H.D)
S / N Ratio 70dB
Power Phantom Power (9 – 52 Vdc)
Low frequency attenuation No
Supplied with shockmount, windscreen and bag
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “Invotone CM610 PRO Electrect Condenser”

Your email address will not be published. Required fields are marked *

Quick Comparison

Invotone CM610 PRO Electrect Condenser removeAKG SE300B - Preamp unit removeAKG C 451B - Condenser cardioid microphone removeAKG C 411PP Vibration Pickup Condenser microphone for string instruments removeRODE NT-5-MP Matched Pair Condenser Microphones removeAKG C 568B HYPERCARDIOID CONDENSER SHORT SHOTGUN MICROPHONE remove
NameInvotone CM610 PRO Electrect Condenser removeAKG SE300B - Preamp unit removeAKG C 451B - Condenser cardioid microphone removeAKG C 411PP Vibration Pickup Condenser microphone for string instruments removeRODE NT-5-MP Matched Pair Condenser Microphones removeAKG C 568B HYPERCARDIOID CONDENSER SHORT SHOTGUN MICROPHONE remove
Image
SKU20INV002SE 300BC 451BC 411PPH11RD00005C 568B
Rating
Price49.60 incl. GR VAT 178.00 incl. GR VAT 347.22 incl. GR VAT 164.00 incl. GR VAT 329.00 incl. GR VAT 414.00 incl. GR VAT
Stock

Out of stock

Available on backorder

In stock

In stock

Only 2 left in stock

In stock

AvailabilityOut of stockAvailable on backorderIn stockIn stockOnly 2 left in stockIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
Cartridge type Back-Electret Condenser
Polar Pattern Cardioid - Uni-­directional
Frequency Response 30Hz - 18KHz
Input Sensitivity 38dB +/- 3dB (0dB = 1V / Pa at 1kHz)
Output impedance 100 Ω +/- 30% at 1 KHz
Input SPL 135dB (1kHz≤1% T.H.D)
S / N Ratio 70dB
Power Phantom Power (9 - 52 Vdc)
Low frequency attenuation No
Supplied with shockmount, windscreen and bag

Transformerless Power/Output Module ? The SE 300 B is used with all AKG Blue Line capsules and operates from 9 ? 52 V phantom power. The 3-position switch allows selection of linear response, -10 dB preattenuation and 12-dB-per-octave 75 Hz low-cut filter. A stand adapter is included.

Specifications

Polar pattern: hypercardioid/directional
Frequency range: 20?20,000 Hz
Sensitivity: 25 mV/Pa (-32 dBV)
Max. SPL for 1 % THD: 124/134 dB
Equivalent noise level: 17 dB-A
Signal/noise ratio (A weighted): 77 dB
Preattenuation pad: -10 dB, switchable Bass cut filter: 12 dB/octave at 75 Hz
Electrical impedance: 200 Ohms
Recommended load impedance: >1,000 Ohms
Power requirement: 9 to 52 V phantom power to DIN 45 596
Current consumption:

This new mic is a performance / price breakthrough. It has an acoustically identical version of the legendary CK1 capsule that is permanently mounted. This combination can handle high output transients as well as subtle harmonics. Also included are switchable 75 and 150Hz 12dB per octave rolloff, and switchable -10 & -20 dB input pad. It is a single pattern (cardioid), and has a frequency response of 20 to 20kHz with 135 dB SPL. Requires 12 to 48V phantom power. Kit comes with bag, windscreen and clip. For more than twenty years, the AKG C 451 with the CK 1 condenser capsule was a standard item on tour riders for sound companies and required by leading engineers for studio projects. When it was discontinued in 1993, there was still a big demand for this microphone. AKG now has an updated version of this classic microphone. The new C 451B provides the same frequency response as the legendary CK 1 with the same slight high-end rise that was the signature of the original. This characteristic makes the C 451B an ideal tool for capturing signals rich in transients such as acoustic guitars, snare drums, hi-hats and for overhead micing of drum kits. The C 451B?s response eliminates the need for heavy EQ on these instruments. The new C 451B has also benefited from newer electronic technology with machine soldering and surface-mount components that improve noise performance and make the microphone much more reliable than the original. Other special features include switchable 10 dB and 20 dB preattenuation pads and switchable low cut filters at 75 Hz or 150 Hz. Standard accessories included are an SA 40 stand adaptor, W 90 windscreen and a rugged zippered bag. Each C 451B also comes with an individual frequency response printout. Three-year warranty. Specification Polar pattern: cardioid Frequency range: 20?20,000 Hz Sensitivity: 9 mV/Pa (-41 dBV re 1 V/Pa) Max. SPL for 0.5 % THD: 135/145/155 dB SPL (-0/-10/-20 dB) Equivalent noise level: 18 dB-A to DIN 45 412 Signal/noise ratio (A-weighted): 76 dB Preattenuation pad: switchable, 0, -10,-20 dB Bass cut filter: switchable to flat or 12 dB/octave at 75 Hz or 150 Hz Electrical impedance: Recommended load impedance: >1.000 Ohms Power requirement: 9?52 Volt phantom power to DIN 45 596/IEC 268-15 Current consumption: Connector: 3-pin male XLR Finish: satin nickel plated Size: dia.: 190 mm (0.7 in.); length: 160 mm (6.3 in.) Net/shipping weight: 125/760 g (4.4 oz./1.7 lbs.) Standard accessories: W 90 windscreen, SA 40 stand adapter  Weighing only 18 grams (0.6 oz.), this ultra-light condenser pickup is ideal for acoustic guitar, mandolin, violin, and most other stringed instruments. The C 411 will give a clear and uncolored sound without changing the balance of the instrument. Attaching the C 411 on or near the bridge or anywhere else on the instrument is easy with the included non-marring, reusable, solventfree adhesive compound. C 411 PP: For hardwire applications, with standard XLR connector for phantom powering.The NT5 matched pairs are a masterpiece of small-diaphragm cardioid- condenser microphone design.Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a .5? capsule, an active J-FET impedance converter with bipolar output buffer. Finished in durable satin nickel, the NT5 is intended for either single or stereo X/Y mic set-ups. The NT5 matched pairs comesupplied in a custom carry case with windshields and mounts. SPECIFICATIONS: Acoustic principle: Externally polarised single diaphragm Directional pattern: Cardioid Frequency range: 20Hz - 20kHz Output impedance: 100? Signal noise ratio din iec 651:  78dB Equvalent noise:  Maximum spl: 143 dB @ 1% THD into 1k_ Sensitivity: -38 dB re 1v/Pa ± 2 dB equivalent to 12mV/Pa where 1 Pa = 94dBSPL Power supply voltage:  P48 Supply (38V?52V), P24 Supply (20V-26V) Current consumption: 4 mA, 2 mA, Weight: 100g

C 568 B 

Compact, short shotgun microphone
Integrated, switchable bass cut filter minimizes mechanical noise
Operates on phantom power
 
High directivity and wide frequency response in a relatively short shotgun make this
microphone a perfect tool for theater, sound reinforcement, and film/TV applications.
Due to its compact and lightweight design, the C 568 B is ideal for camera mount
applications. Below 500 Hz it functions as a hypercardioid microphone; above 500 Hz
the acoustic interference tube introduces increasing directivity. A switchable 12 dB/
octave 120 Hz bass cut filter effectively suppresses rumble and wind noise. The rugged,
all-metal body contains the built-in preamp. Phantom powering (9?52 V) required; foam
windscreen and stand adapter included.
 
SPECIFICATIONS:
Polar pattern hypercardioid/directional
Frequency range 20 to 20,000 Hz
Sensitivity 11 mV/Pa (-39 dBV)
Max. SPL 128 dB
Equivalent noise level (CCIR 468-3) 29 dB
Equivalent noise level 18 dB-A
Signal/noise ratio 76 dB
Bass filter 12 dB/octave at 120 Hz
Impedance 600 ohms
Recommended load impedance >2000 ohms
Supply voltage 9 to 52 V phantom power to DIN 45596
Current consumption

Weight0.50 kg0.50 kg0.76 kg0.15 kg2.00 kg0.71 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.50 kg
Weight 0.76 kg
Weight 0.15 kg
Weight 2.00 kg
Weight 0.71 kg