Content |
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Processed Active Monitor
200W+ 50W RMS - 124dB SPL
- 200mm (8’’) custom woofer with improved efficiency and linearity
- 200Wrms class D amplifier for LF and 50Wrms for HF.
- Low noise toroidal transformer power supply
- On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
- 2 DSP preset for maximum acoustical flexibility
- Available in white colour 8AW
Code: |
37689 / 37906 White |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
200/50 W RMS |
Built-in amplifier peak LF/HF: |
400/100 W |
Frequency response: |
60Hz - 20KHz -6dB |
Low Frequency woofer: |
8 - 1.7 coil inch |
High Frequency driver: |
1 -1 coil inch |
Maximum SPL cont/peak: |
120/124 dB |
Dispersion: |
90° x 60° HxV |
Input impedance: |
22 Kohm |
Crossover Frequency: |
2.5 KHz |
AC Power requirements: |
160 VA |
Input connector: |
XLR - jack with loop |
Power cord: |
5 / 16.4 m/ft |
Net Dimension (WxHxD): |
255x415x245 - 10.03x16.33x9.64 mm/inch |
Net Weight: |
8.2 / 18.7 Kg/lb |
Transport Dimension (WxHxD): |
330x480x320 - 12.99x18.89x12.59 mm/inch |
Transport Weight: |
9.7 / 21.38 Kg/lb |
| Features
- Compact and powerful performance
- 1000 Watt peak power Class-D amplifier module
- Easily selected contours for commonly-used applications
- Advanced DSP with Intrinsic Correction™ for superior sound quality and speaker protection
- Directivity Matched Transition™ (DMT) for consistent frequency response across the entire coverage area
- Light weight and highly portable
- Professional appearance looks great in any application
- Use for main PA, stage monitor, or instrument amplifier
- 35 mm pole socket
- Optional yoke, tote, and outdoor cover accessories
- Complete EASE and CAD information available online
Model |
CP8 |
Configuration |
Two-way active loudspeaker |
LF Transducer: |
8 in (203 mm), cone |
HF Transducer: |
1.4 in (35.6 mm) compression driver |
Frequency Response (-6 dB) |
56 - 20 kHz |
Frequency Range (-10 dB) |
53 - 20 kHz |
Nominal Coverage Angle: |
90° Axisymetric |
Maximum Rated SPL1: |
124 dB |
Amplifier: |
Class D
Peak: 800 W (LF), 200 W (HF) |
Controls: |
Power
2 x Gain
Mic Boost Push Switch
6-way Contour Selection Switch |
Indicators: |
Power LED
2 x Input Signal LED
Input B MIC selected LED
Limiter active LED |
Connectors: |
2 x locking XLR/F ¼” combo (Line Input and Mic/Line input)
1 x 3.5 mm TRS (Stereo Input)
1 x XLR/M (Mix Output)
1 x IEC power connector |
AC Power Input: |
Universal power supply 100 – 240 VAC, 50 – 60 Hz |
AC Power Consumption (1/8th Power): |
100 VAC, 0.75A - 240VAC 0.31A |
Enclosure Material: |
Polypropylene |
Attachment Points: |
M8 threaded insert |
Color: |
Black (RAL 9011) |
Grille: |
18 Gauge powder-coated steel |
Dimensions (HxWxD): |
16.2 x 10.7 x 10.1 in
411 x 273 x 256 mm |
Net Weight: |
21.0 lbs (9.5 kg) |
Shipping Weight: |
25.5 lbs (11.4 kg) |
Regulatory: |
EMC, UL, CB |
Optional Accessories: |
CP8 Tote, CP8 Outdoor Cover, CP8 Yoke |
|
8’’ bi-active two way plastic speaker with Media Player
- Multimedia player: Usb Flash Drive, Sd Memory Card, STEREO Bluetooth Device, Remote Control
- Woofer 8’’ VC 1,5”
- Driver 1’’ VC 1”
- Line output XLR OUT + ¼” JACK OUT
- Line input XLR IN + 2 x RCA
- Mic input XLR IN + ¼” JACK IN
- Rms power AB class 120 + 30 W
- Peak power 300W
- Frequency response 60hz-20khz
- Peak spl 123 dB
- Power supply AC110V/AC230V
|
The QSC K.2 Series™ represents the best-inclass loudspeaker for today’s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications.
Features
- Best in class audio performance
- 2000 Watt Class-D amplifier module
- Intrinsic Correction™ tuning and loudspeaker management
- DMT™ (Directivity Matched Transition) design provides excellent power response and consistent performance across the listening area
- Refined, professional appearance looks great in any application
- Rugged ABS enclosure for long life and lasting durability
- Deployment in either main PA or floor monitor position
- Factory Presets and savable/recallable Scenes for commonly-used application
- Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
- Dual pole cup mounts (standard and 7.5 degree down-tilt)
- M10 fittings for flown applications
- Optional security panel prevents unauthorized tampering of controls
- Complete EASE and CAD information available online
Model |
K8.2 |
Configuration |
Multi-purpose, 2-way active loudspeaker |
LF Transducer |
8-inch (203 mm), cone |
HF Transducer |
1.4-inch (35.6 mm) titanium diaphragm compression driver |
Frequency Response (-6 dB) |
59 Hz - 20 kHz |
Frequency Range (-10 dB) |
55 Hz - 20 kHz |
Nominal Coverage Angle |
105° Axisymetric |
Maximum Rated SPL1 Amplifier Cooling |
128 dB @1 M, peak 122 dB @ 1 M, continuous Class D Peak: 1800 W (LF), 225 W (HF) Low-noise, variable speed fan |
Controls |
Power 3 x Level Rotary encoder (push) 2 x selection buttons |
Indicators |
Monochrome LCD Display 1.75-inch x 1-inch (45 mm x 25.4 mm) 2 x Power LED (front and rear) 3 x Input Signal LED Input A Mic selected LED Input B Hi-Z selected LED Limiter active LED |
Connectors |
2 x locking XLR/F ¼⁻ᶦⁿᶜʰ combo (Mic/Line Input and Hi-Z/Line Input 1 x 3.5 mm TRS (Stereo Input) 2 x XLR/M (Loop-thru Output) 1 x XLR/M (Mix Output) 1 x locking IEC power connector |
AC Power Input |
Universal power supply 100 – 240 VAC, 50 – 60 Hz |
AC Power Consumption 1/8th Power2 |
100 VAC, 2.1 A / 120 VAC, 1.9 A / 240 VAC, 1.1 A |
AC Power Consumption - Standby |
.2A at any voltage |
Enclosure Details |
|
Enclosure |
Impact Resistant ABS |
Attachment Points |
2 x M10 threaded inserts plus Pull-Back |
Color |
Black (RAL 9011) |
Grille |
18 Gauge powered coated steel, internal cloth lining |
Dimensions (HxWxD) |
17.7 x 11 x 10.6 in 449 x 280 x 269 mm |
Net Weight |
12.2 kg (27 lbs) |
Shipping Weight |
14.4 kg (31.8 lbs) |
Regulatory |
CE, WEEE, UL, China RoHS, RoHS II, FCC Class B |
Optional Accessories |
K8 Tote, K8 Outdoor Cover M10 Kit-C, K.2-LOC Lock Out Cover K8.2 Yoke |
|
The DVX D8 HP is a powerful active 8“/1“2-way speakercabinet designed to render speech and background and other music.
Loaded with a high-quality8" woofer and a 1" compression driverwith a rotatable CD horn, it is a very articulate with great speech intelligibility and excellent audio properties.
Equipped with an integrateddigiproG2digital power amp, this powered enclosure offers the compact dimensions and light weight that to date have been the domain of high-end passive loudspeakers.
Cabin Type: | Wood | Function: | Active, 2 way | Monitor Use: | Yes | Amplifier: | 400W | LF/MF, Woofer: | 8'' | HF, Horn: | 1 ' | DSP Processor: | Yes | Max SPL: | 125 dB | Dispersion: | 90/70 ° | Frequency Response: | 75 - 20.000 Hz | Pole mount: | - | Rigging: | 6x M8 2x 10mm Quick Release for DTF-bracket | Dimensions: | 250 x 425 x 260 (W x H x D) | Weight: | 9.7 kg | Color: | Black |
| MASTER AUDIO SB200B 2-way Active Speaker2-way 8\'\'+1\'\' 150Wrms
- 2-way BI-AMPLIFIED speaker box
- Power output 150 W RMS
- ABS box
- Woofer 8“, paper cone
- Compression driver, 1" titanium diaphragm
- Frequency response : 30Hz-20KHz
- SPL(1W/1m) : 108±2 dB
- Dimensions (H x W x D) : 365 x 245 x 200 mm
- 9 kg
|
Reviews
There are no reviews yet.