| Content |
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Processed Active Monitor
200W+ 50W RMS - 124dB SPL
- 200mm (8’’) custom woofer with improved efficiency and linearity
- 200Wrms class D amplifier for LF and 50Wrms for HF.
- Low noise toroidal transformer power supply
- On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
- 2 DSP preset for maximum acoustical flexibility
- Available in white colour 8AW
| Code: |
37689 / 37906 White |
| Configuration: |
2 way |
| Built-in amplifier LF/HF: |
200/50 W RMS |
| Built-in amplifier peak LF/HF: |
400/100 W |
| Frequency response: |
60Hz - 20KHz -6dB |
| Low Frequency woofer: |
8 - 1.7 coil inch |
| High Frequency driver: |
1 -1 coil inch |
| Maximum SPL cont/peak: |
120/124 dB |
| Dispersion: |
90° x 60° HxV |
| Input impedance: |
22 Kohm |
| Crossover Frequency: |
2.5 KHz |
| AC Power requirements: |
160 VA |
| Input connector: |
XLR - jack with loop |
| Power cord: |
5 / 16.4 m/ft |
| Net Dimension (WxHxD): |
255x415x245 - 10.03x16.33x9.64 mm/inch |
| Net Weight: |
8.2 / 18.7 Kg/lb |
| Transport Dimension (WxHxD): |
330x480x320 - 12.99x18.89x12.59 mm/inch |
| Transport Weight: |
9.7 / 21.38 Kg/lb |
| Features
- Compact and powerful performance
- 1000 Watt peak power Class-D amplifier module
- Easily selected contours for commonly-used applications
- Advanced DSP with Intrinsic Correction™ for superior sound quality and speaker protection
- Directivity Matched Transition™ (DMT) for consistent frequency response across the entire coverage area
- Light weight and highly portable
- Professional appearance looks great in any application
- Use for main PA, stage monitor, or instrument amplifier
- 35 mm pole socket
- Optional yoke, tote, and outdoor cover accessories
- Complete EASE and CAD information available online
| Model |
CP8 |
| Configuration |
Two-way active loudspeaker |
| LF Transducer: |
8 in (203 mm), cone |
| HF Transducer: |
1.4 in (35.6 mm) compression driver |
| Frequency Response (-6 dB) |
56 - 20 kHz |
| Frequency Range (-10 dB) |
53 - 20 kHz |
| Nominal Coverage Angle: |
90° Axisymetric |
| Maximum Rated SPL1: |
124 dB |
| Amplifier: |
Class D
Peak: 800 W (LF), 200 W (HF) |
| Controls: |
Power
2 x Gain
Mic Boost Push Switch
6-way Contour Selection Switch |
| Indicators: |
Power LED
2 x Input Signal LED
Input B MIC selected LED
Limiter active LED |
| Connectors: |
2 x locking XLR/F ¼” combo (Line Input and Mic/Line input)
1 x 3.5 mm TRS (Stereo Input)
1 x XLR/M (Mix Output)
1 x IEC power connector |
| AC Power Input: |
Universal power supply 100 – 240 VAC, 50 – 60 Hz |
| AC Power Consumption (1/8th Power): |
100 VAC, 0.75A - 240VAC 0.31A |
| Enclosure Material: |
Polypropylene |
| Attachment Points: |
M8 threaded insert |
| Color: |
Black (RAL 9011) |
| Grille: |
18 Gauge powder-coated steel |
| Dimensions (HxWxD): |
16.2 x 10.7 x 10.1 in
411 x 273 x 256 mm |
| Net Weight: |
21.0 lbs (9.5 kg) |
| Shipping Weight: |
25.5 lbs (11.4 kg) |
| Regulatory: |
EMC, UL, CB |
| Optional Accessories: |
CP8 Tote, CP8 Outdoor Cover, CP8 Yoke |
| The LD Systems SAT82AG² is an active installation monitor, which provides a convincing performance on a PC or laptop and as a home studio monitor.
The compact 2-way bass reflex design is equipped with an 8" custom-made woofer and a 1" compression driver which are driven by an 80 Watt Class AB power amplifier. The input is a combo socket; an XLR socket is used to loop through the signal. With a frequency response of 50 Hz - 20 kHz and 114 dB maximum sound pressure, the SAT82AG² produces a balanced sound with high dynamics. The monitor features protection circuits for the tweeter against overcurrent, and a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The cabinet of the SAT82G² is made of 12mm MDF with M6 flight points and is available in black or white with a durable textured paint finish. A versatile mounting bracket is included; a universal joint mount is available as an accessory.
- Product Type: installation monitor
- Type: active
- Woofer Size: 8“
- Woofer Size: 203.2 mm
- Woofer Magnet: ferrite
- Woofer Brand: custom-made
- HF Driver Size: 1“
- HF Driver Size: 25 mm
- HF Driver Magnet: ferrite
- HF Driver Brand: custom-made
- Amplifier (A): Class A/B
- Dispersion Angle (H x V): 60° x 60°
- Power Output (RMS): 80 W
- Frequency Response: 50 Hz - 20,000 Hz
- Max SPL: 114 dB
- Protection: overcurrent, HF drivers
- Controls: volume, power switch (on/off), power mode (on/auto)
- Indicators: Power, Overload
- Line Input Connectors: 6.3 mm TRS, XLR
- Line Output Connectors: XLR
- Power Supply: transformer
- Operating Voltage: 220 V AC - 240 V AC, 50 - 60 Hz
- Cabinet Material: 12 mm MDF
- Cabinet Surface: textured coating
- Cabinet Colour: white
- Cabinet Type: bass reflex
- Width: 274 mm
- Height: 410 mm
- Depth: 243 mm
- Features: wall bracket
|
The D 8A is the active version of the D 8 offering integrated Class-D power amplifiers, an electronic crossover and loudspeaker equalization.
The D 8A is ideal when combined with active subwoofers for the creation of very compact, active 3-way high-powered systems. For the low- and high frequency ranges, 2x 200 W RMS are available. The maximum overall amplifier output comes to 800 W. The frequency-range is 56 Hz - 20 kHz and the max. SPL is 123 dB / 1m)
The Line input is implemented as an XLR/jack combo socket. In addition an XLR microphone input with a separate level control is available. For operation with powered subwoofers, a switchable low-cut filter is provided.
The extensive range of optional accessories allows virtually unlimited use in fixed installations or flown configurations.
Cabinet Fullrange
Configuration Powered 2-Way
Components 8" / 1“
Rated Power RMS 200 W LF / 200 W HF
Max. Amplifier Output Capability 400 W LF / 400 W HF
max. SPL / 1m 123 dB
Frequency Range (-10 dB) 56 Hz - 20 kHz
Radiation-Pattern H x V 90° x 90°
Dimensions mm (W x H x D) 282 x 442 x 259
Weight 9 kg
|
Features
- 2-way, full-range system
– 8″ bass loudspeaker
– Compression driver
– Asymmetric enclosure design for stage monitor use
– Built-in rigging points
– Stand mountable
The Action 8 is a compact 2-way passive full-range loudspeaker that utilizes a 8” low frequency transducer and a full compression driver. The multi-angle cabinet is constructed of Birch plywood protected by an enviormentally friendly ISO-flex black paint finish. A rear located handle and a robust steel grille are provided. A 35 mm tripod socket allows for stand mounting.
Technical Data
| RMS Power Handling | 150 W | | Peak Power Handling | 600 W | | Frequency Range (-10 dB) | 60 Hz-20 kHz | | Nominal Impedance | 8 ohms | | On-axis Sensitivity 1 W / 1 m | 92 dB SPL | | Rated Peak SPL at 1 m | 120 dB | | Dispersion | 80º x 80º | | Enclosure Material | Birch Plywood | | Color/Finish | Black/ISO-Flex Paint | | Connectors | 2 x NL4 Speakon | | Dimensions (H x W x D) | 47.5 x 27.9 x 25.5 cm
18.7 x 11 x 10 in | | Weight | 8.4 kg (18.5 lb) |
|
Input Connections: XLR and TRS Combo; XLR with Independent Gain
- Power Requirement: 120V: 95V - 132V, 50 - 60 Hz, 0.6A; 230V:190V - 264V, 50 - 60 Hz, 0.4A
- Frequency Response: (-3 dB)60 Hz - 20 kHz Hz Full Range Mode
- Frequency Response: (-10 dB) 48 Hz - 20 kHz Hz Full Range Mode
- Recommended High-Pass Frequency: 100Hz (User Selectable)
- Max. SPL/1m (calc): 123 dB
- LF Transducer: EV8L, 203mm (8-inch) Driver
- HF Transducer: DH2005, 25mm (1-inch) Exit Compression Driver
- Crossover Frequency: 1800 Hz
- Enclosure Material: High Impact Polystyrene
- Grill: Polyester Powder Coated, 18GA Galvanized Steel
- Height: 457 mm (17.99 inches)
- Width: 282 mm (11.1 inches)
- Depth: 264 mm (10.39 inches)
- Weight: 8.62 kg (19 lbs)
- Shipping Weight: 10.3 kg (22.7 lbs) |
Reviews
There are no reviews yet.