James Thomas Pixelline Micro E

James Thomas Pixelline Micro E

174 high intensity red, green and blue LEDs
16.7 million colour combinations
Beam angle 20?° conical as standard
New built in effects generator, capable of more than 1000 effects
Up to 29 channels of effects control
Independent DMX start address for the effects generator
Programmable offset for synchronising effects over multiple fixtures
DMX 512 digital input/output with 3 or 9 channel RGB mode
Provides an alternative projection medium for video manipulation software
Factory reset option
Control via external source or stand alone master/slave
PowerCon 20 Amp chassis mounted input and output sockets fitted as standard
Auto setting power input 100 - 250V AC
Yoke supplied as standard for ease of hanging or floor standing
Low power consumption (25 watts) virtually no heat generated
Silent convection cooling system
Robust metal construction
Black powder coating as standard, other colours available to order
Dimensions 205mm (L) x 84mm (H) x 167mm (D) - 155mm (H) with yoke
Weight 2.4kg with yoke (1.9kg without)
IP20 rated

Griven AL-1206 DAWN 45?° LED Colour Changer

Primarily intended for exterior architectural lighting purposes, DAWN is a high output
and high quality IP66 rated colour changer. Fitted with the latest cutting edge technology
using high brightness and high efficiency LEDs, which have a multitude of benefits, including
low power consumption; no moving parts and long light source life, giving virtually maintenance
free operation; light weight and compact size, giving easy handing and installation. DAWN'S
LED light sources are a mixture of red, green and blue to produce, via RGB electronic mixing
an endless palette of attractive pastel or deep colours, which can crossfade slowly or be snap
changed as desired; the LEDs have instant response. The onboard control system gives stand
alone colour sequence control, with master/slave selectable for multiple unit synchronization
or Dawn can be controlled from the dedicated IP65 Controller or any DMX512 controller. A choice
of beam angle options are available to suit most requirements, and the alternative lenses are also
able to be purchased separately and retrofitted if required.

TECHNICAL SPECIFICATIONS

SOURCE
High brightness 1,2W power LED (Light-Emitting Diode) units
Continuously variable light intensity
1-100% electronic dimming facility
No UV
Virtually instant light production (100 ns)
Strobe facility (12 fps)

SOURCE LIFE
The LED light sources used have an exceptionally long life: predicted 100.000 hours
under normal operating conditions.

OPTICS
10???£ beam angle (ordering code AL 1202)
30???£ beam angle (ordering code AL 1204)
45???£ beam angle (ordering code AL 1206)
Optional Frost filter for 10???£ optics version only (ordering code AL 1302)
Optional 10???£ beam set (ordering code AL 1314)
Optional 30???£ beam set (ordering code AL 1315)
Optional 45???£ beam set (ordering code AL 1316)
Optional expansion filter (ordering code AL 1304)

COLOUR VARIETY
RGB additive colour mixing for countless attractive saturated colours
Theoretical variety of 16.700.000 colour hues
Pre-set selectable colour sequences and blends

CONTROL OPERATION
On-board Dip Switch set for digital data assignment and stand alone operation control
Master and Slave
4 channels of DMX 512 standard protocol
Input and output DMX signal connectors
IP65 optional dedicated DMX controller (ordering code AL 1322)

ELECTRICAL SPECIFICATIONS
Power supply: standard 210-250V / 50-60Hz / 0,15 Amp.
optional 100-120V / 50-60Hz / 0,35 Amp. (available on request)
Power Consumption: 36W max at full intensity
(full RGB)
Self-resetting fuse protection
Meets CE safety standards

HOUSING
Die cast aluminium body
Scratch resistant silver-grey paint
Easy mounting system for wall, ceiling and floor with full orientation capability
Fixing yoke included
Outdoor and indoor use
IP66 protection rating

EXTERNAL OPERATING LIMITS
-20?°C to 30?°C (-4?°F to 86?°F) temperature
0-95% relative humidity (non condensing)

WEIGHT
5,5 Kg

DMX CHANNELS
Channel 1 - Red
Channel 2 - Green
Channel 3 - Blue
Channel 4 - Dimmer / Strobe

Coemar RIGA LED 50 19W

body satin aluminium
IP20 protecion rated
luminous source 50 multicolor led (RigaLed 50S and 50A)
100 multicolor led (RigaLed 100S and 100A)
optics 74?° symmetric reflector (S version)
96?° (56?°+40?°) asymmetric reflector (A version)
mounting and fixing in any position
mains supply supply from RegoBox 24 or RegoLed system
IN/OUT connector
24V DC
item code 8036 - RigaLed 50 S
8037 - RigaLed 50 A

Available with symmetrical and assymetrical lens

James Thomas Pixerpar 90-IP40 RGB

90 high intensity Luxeon emitters
Red, green and blue Luxeon K2 LEDs
16.7 million colour combinations
Beam angle 6?° conical as standard, other beam angles available to order
Pre-programmed with 2 overlapping sets of effects, each with 31 patterns
Provides an alternative projection medium for video manipulation software
DMX 512 digital input/output up to 3 channels
Control via external source or stand alone master/slave
On board diagnostics provides data and power information
Auto setting power input 100 - 250V AC
Low power consumption (135 watts) virtually no heat generated
Internal quiet fan cooling system
Robust metal construction
Available in black and silver anodised, other colours available to order
Dimensions 298mm(W) x 317mm(H) x 181mm(D)
Weight 6.8kg
IP40 rated

Griven AL-1460 DICE Led Colour Changer

DICE is a die cast aluminium wall-mounted ?¬tting, using a mixture of
Red, Green and Blue (RGB) Lighting Emitting Diodes (LED) and creating,
via RGB electronic mixing, an endless palette of attractive colours. Apart
from the well-known ability of Griven lighting ?¬xtures to create colour changing effect
DICE features the capability of projecting the light beam towards two different directions.
Colour changing light shafts and cones in linear edge and corner applications are among
the various effects offered by this brand-new LED ?¬xture.The IP66 weather protection rate
makes the unit intended for exterior architectural lighting purposes and the digital control
by any DMX512 signal allows an easy access to all functions.

Technical Specifications

SOURCE
High brightness 1,2W power LED (Light-Emitting Diode) units
Continuously variable light intensity
1-100% electronic dimming facility
No UV
Virtually instant light production (100 ns)
Strobe facility (12 fps)

SOURCE LIFE
The LED light sources used have an exceptionally long life: predicted 100.000 hours
under normal operating conditions as mentioned by the LED manufacturer.

OPTICS
10?° beam angle (ordering code AL 1460)

COLOUR VARIETY
RGB additive colour mixing for countless attractive saturated colours
Theoretical variety of 16.700.000 colour hues Pre-set selectable colour sequences and blends

CONTROL OPERATION
4 channels of DMX 512 standard protocol
Input and output DMX signal connectors
Optional remote control (ordering code AL 1320)
IP65 optional dedicated DMX controller(ordering code AL 1322)
20 CH DMX controller (ordering code GR0171)
Power CDI commander ??? DMX interface for PC (ordering code AD 4118)
LED D.O.P. Controller (ordering code AL 1419)

ELECTRICAL SPECIFICATIONS
Power supply:
standard 210-250V / 50-60Hz /
0,15 Amp. class 2 (w. 4 units)
optional: 90-120V / 50-60 Hz / 0,33 Amp. class 2 (w. 4 units),
200V / 50-60Hz / 0,17 Amp. class 2 (w. 4 units) - available on request -
Power Consumption: 9W per unit max at full intensity(full RGB)
Self-resetting fuse protection
Meets CE safety standards

HOUSING
Die cast aluminium body
Separate transformer unit box (powering up to 4 units
(ordering code for 220V AL 1418 ??? for 110V AL 1420)
Scratch resistant grey ?¬nish
Easy mounting system - IP65 protection rating

EXTERNAL OPERATING LIMITS
-20?°C to 45?°C (-4?°F to 113?°F) temperature
0-95% relative humidity (non condensing)

WEIGHT
Unit = 1,65 Kg - IP65 Transformer box = 2,5 Kg

DMX CHANNELS
Channel 1 - Red
Channel 2 - Green
Channel 3 - Blue
Channel 4 - Dimmer / Strobe

James Thomas Pixerpar 90-IP65 RGB

90 high intensity Luxeon emitters
Red, green and blue Luxeon K2 LEDs
16.7 million colour combinations
Beam angle 6?° conical as standard, other beam angles available to order
Pre-programmed with 2 overlapping sets of effects, each with 31 patterns
Provides an alternative projection medium for video manipulation software
DMX 512 digital input/output up to 3 channels
Control via external source or stand alone master/slave
On board diagnostics provides data and power information
Auto setting power input 100 - 250V AC
Low power consumption (135 watts) virtually no heat generated
Internal quiet fan cooling system
Robust metal construction
Available in black and silver anodised, other colours available to order
Dimensions 298mm(W) x 317mm(H) x 181mm(D)
Weight 6.8kg
IP65 rated