Content |
- 1-inch (25 mm) soft dome tweeter/4-inch (102 mm) aluminized woofer.
- Bass-reflex design with flared, rear-firing port: Increases system efficiency and bass output.
- Waveguide: A unique tweeter faceplate that provides more uniform dispersion in the critical frequency range of 2-10 kHz. Dynamics and clarity are enhanced while distortion is significantly reduced.
- Centre-plug: Replaces the typical dust cap and eliminates cone breakup, for a woofer with faster "attack" and tighter, more natural bass.
- Aluminized woofers: Increases driver cone rigidity for solid bass reproduction.
- 5-way binding posts: Allows for multiple connection options with wire up to 12 gauge (AWG).
Woofer (mm/in) |
|
102 / 4 |
System Type |
|
2 Way Bass Reflex |
Product dimensions (mm/in, HxWxD) |
|
240 x 133 x 210 / 9.4 x 5.2 x 8.3 |
Tweeter (mm/in) |
|
25 / 1 |
Crossover Frequency |
|
2500 |
Weight (Kg/lb) |
|
3.4 Kg / 7.5 lbs |
Impedance |
|
6 |
Power Handling (Watts Long/Short Term) |
|
80 / 130 |
Frequency Response (Hz, +/-3dB) |
|
80-20,000 |
Sensitivity (dB, 2.8V/1m) |
|
87 |
Finish |
|
Black Ash , White Ash , Dark Apple |
| Frequency Response +/- 3dB: 60 Hz - 35 KHz
Sensitivity (1W@1M): 87 dB
Driver Compliment: 1 x 140mm (5 1/2“) RST® mid-bass driver
1 x 25mm (1“) C-CAM® gold dome tweeter
Nominal Impedance: 8 ohms
Maximum SPL (each): 110.8 dBA
Recommended Amplifier Requirements (RMS): 25 - 100W
Bass Alignment: Front ported - bass reflex. HiVE®II port system
Power Handling (RMS): 100W
Crossover Frequency: 3.0kHz
External Dimensions:
(H x W x D) 250 x 140 x 140 mm
9 13/16 x 5 1/2 x 5 1/2 inch
Weight (Individual): 3.95 kg (8 3/4 lbs)
User's Manual
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
Dimensions | Metric :6-1/4” W x 6-1/2” D x 10-7/8” H | 15.9 x 16.5 x 27.6 cm
Driver Complement :One 1" pure aluminum dome tweeter; One 5-1/4" BDSS bass/midrange drivers; One 5-1/4" pressure coupled bass radiator
Frequency Response :42 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :80 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Gloss Black; Gloss White
Accessories :Two ¼ 20 insert cover plugs; Tripod base
Mounting Options :Vertically: On Shelf with included tripod base; Equipped with rear ¼ 20 sized thread to accommodate on wall/on ceiling mounting with aftermarket articulating mount (articulating mount not included); Equipped with bottom ¼ 20 sized thread to accommodate ProStand 1000 stand mounting (ProStand 1000 available separately); Equipped with keyhole mounting slot for flush mounting
Packaging :One to a carton
Weight | Metric :6.5 lbs | 2.9 kg
Warranty :5 Years
|
# Perfect for use with 55-inch class and larger ultra-shallow TVs
# Only 1.5 inches (38mm) deep
# Wall mount bracket and table stand included
# Simply the best ultra slim on-wall speaker on the planet
# The dynamic punch, wide frequency range and broad dispersion of full size speakers
# Aircraft grade extruded Aluminum enclosure
# Anodized Aluminum dome XTDD drivers
# Pure Aluminum dome tweeter
Dimensions (mounted on wall without bracket) :32" H x 6" W x 1-1/2" D (81.5cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :32" H x 6" W x 1-9/16" D (81.5cm x 15.2cm x 40mm)
Dimensions (on table stand) :35" (89.1cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :4 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :70Hz - 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :30 - 200 Watts per channel
Enclosure :Extruded Aluminum, sealed
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black
|
Itʼs widely understood that the sound of surround TVs cannot compete with the excitement of a properly designed and equalised home theatre system. But great sound comes at the expense of living space…until now. The wall-hugging RX-FX surround speaker reconciles the problem by providing a convincing, enveloping timbre-consistent surround sound that places you on the edge of your seat and at the heart of the action. Discreet enough to be flush-mounted on side or rear walls, the RX-FX design will blend with the system and your décor so completely youʼll wonder why you ever thought of compromise. Itʼs also immensely flexible sonically, offering direct or diffuse sound effects at the flick of a switch. System Format: 2 Way Frequency Response: 60Hz - 35kHz Sensitivity (1W@1M): 89dB Nominal Impedance: 6 Ohms Maximum SPL (dBA): 111.8 Power Handling (RMS): 80W Recommended Amplifier Requirements (RMS): 10-80W Bass Alignment: Sealed Cabinet Tweeter Crossover Frequency: 2.1kHz Drive Unit Complement: 1 x 6" RST® Bass/Mid driver. 2 x 1" (25mm) C-CAM® gold dome tweeters Product External Dimensions: (H x W x D) 250 x 300 x 120 mm (9 13/16 x 11 13/16 x 4 3/4 inch) Individual Weight: 4.69 Kg (10.38 lb) User's Manual Available in colors
|
Driver Complements
Mid/Woofer 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Tweeter 1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response 90Hz-31KHz
Lower -3dB Limit 115Hz
Upper -3dB Limit 28KHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 88 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 7 3/4" H x 4 1/2" W x 5 15/16" D
(19.68cm H x 11.43cm W x 15.08cm D)
Mounting Options Included wall mount bracket; 1/4x20 threated insert
Enclosure Type Steel-plate reinforced curved enclosure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 3.00 lbs. (1.36kgs)
Shipping unit: each
Total Shipping Weight 3.70 lbs. (1.68kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
Accessories (comes with) included wall mount bracket
ALSO AVAILABLE IS WHITE COLOR
|
Reviews
There are no reviews yet.