JAMO S 622 Bookshelf Speaker (Pair)

• 1-inch (25 mm) soft dome tweeter/4-inch (102 mm) aluminized woofer.

• Bass-reflex design with flared, rear-firing port: Increases system efficiency and bass output.

• Waveguide: A unique tweeter faceplate that provides more uniform dispersion in the critical frequency range of 2-10 kHz. Dynamics and clarity are enhanced while distortion is significantly reduced.

• Centre-plug: Replaces the typical dust cap and eliminates cone breakup, for a woofer with faster "attack" and tighter, more natural bass.

• Aluminized woofers: Increases driver cone rigidity for solid bass reproduction.

• 5-way binding posts: Allows for multiple connection options with wire up to 12 gauge (AWG).

Itʼs widely understood that the sound of surround TVs cannot compete with the excitement of a properly designed and equalised home theatre system. But great sound comes at the expense of living space…until now. The wall-hugging RX-FX surround speaker reconciles the problem by providing a convincing, enveloping timbre-consistent surround sound that places you on the edge of your seat and at the heart of the action. Discreet enough to be flush-mounted on side or rear walls, the RX-FX design will blend with the system and your décor so completely youʼll wonder why you ever thought of compromise. Itʼs also immensely flexible sonically, offering direct or diffuse sound effects at the flick of a switch.

System Format: 2 Way
Frequency Response: 60Hz - 35kHz
Sensitivity (1W@1M): 89dB
Nominal Impedance: 6 Ohms
Maximum SPL (dBA): 111.8
Power Handling (RMS): 80W
Recommended Amplifier Requirements (RMS): 10-80W
Bass Alignment: Sealed Cabinet
Tweeter Crossover Frequency: 2.1kHz
Drive Unit Complement: 1 x 6" RST® Bass/Mid driver.
2 x 1" (25mm) C-CAM® gold dome tweeters
Product External Dimensions:
(H x W x D) 250 x 300 x 120 mm
(9 13/16 x 11 13/16 x 4 3/4 inch)
Individual Weight: 4.69 Kg (10.38 lb)

User's Manual

Available in colors

Driver Complements
Mid/Woofer     1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response     90Hz-31KHz
Lower -3dB Limit     115Hz
Upper -3dB Limit     28KHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     88 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Cabinet Size     7 3/4" H x 4 1/2" W x 5 15/16" D
(19.68cm H x 11.43cm W x 15.08cm D)
Mounting Options     Included wall mount bracket; 1/4x20 threated insert
Enclosure Type     Steel-plate reinforced curved enclosure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight     3.00 lbs. (1.36kgs)
Shipping unit:     each
Total Shipping Weight     3.70 lbs. (1.68kgs)
Speaker Warranty     5 years parts and labor (original purchaser)
Accessories (comes with)     included wall mount bracket



ALSO AVAILABLE IS WHITE COLOR

Two way, bass-reflex
Woofer 170 mm.
Polypropylene pentapolymer
Tweeter 28 mm. silk soft dome
Impedance: 6 Ohm (min. 4)
RMS POWER: 80 W
MAX POWER: 125 W
Efficiency: 88 dB/W/1 m
Dimensions: 255x350x400mm.
Net weight: 13,5 Kg.
Finish: high gloss metallized
Colors: blue, red, silver grey,
charcoal grey, racing red

The M-1 has been engineered with the same design attributes and ethos as B&Wʼs larger ranges. Perhaps the most striking thing about the M-1 is the weight and strength of its curved aluminium cabinet. This is combined with a strong, glass-loaded ABS front baffle. Together they provide an excellent cabinet: the curved aluminium is stiff and the ABS offers excellent and appropriate damping characteristics.

The M-1ʼs drive units were developed by Bowers & Wilkins specifically for the design. The metal dome tweeter benefits from refinements developed for the new B&W 800 Series and includes Nautilus™ tube loading and neodymium magnets. The glass fibre bass/midrange coneʼs ability to absorb standing waves has been further enhanced by the inclusion of five strategically placed resin filled slots that further minimise distortion.

The result of this detailed cabinet and drive unit engineering has allowed B&Wʼs engineers to borrow another feature from the new 800 Series and utilise the simplest of electronic equalisation in the M-1ʼs crossover. Each of the drive units is fed by only a single, carefully selected component. This approach to crossover design, although painstaking as it relies on optimising all of the physical components in a design, is crucial in achieving its aim of neither adding to nor subtracting from the original signal.

The M-1 is available in three colour options - black, white and silver, each with chromium plated stem and table base.

Two way, bass-reflex
Woofer 130 mm. (5“)
Coated paper
Tweeter 28 mm.
Soft dome (silky fabric)
Impedance: 6 Ohm (min. 4)
RMS POWER: 80 W
MAX POWER: 120W
Efficiency: 89 dB/W/1m
Dimensions: 200x270 Weight: 7,5 Kg
Finishing:solid walnut