JBL CSM-14 PRE-AMP 4IN & 1 OUT

517.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Backed by the combined technological prowess of multiple HARMAN brands, the JBL Commercial Series Mixers (CSM) deliver unsurpassed quality in commercial sound. Easily configured for a range of applications, such as background music, security, and paging, CSM units are designed for everything from schools and hospitals to restaurants and fitness facilities. They feature RJ45 connectors […]

 

Read more

Backed by the combined technological prowess of multiple HARMAN brands, the JBL Commercial Series Mixers (CSM) deliver unsurpassed quality in commercial sound. Easily configured for a range of applications, such as background music, security, and paging, CSM units are designed for everything from schools and hospitals to restaurants and fitness facilities. They feature RJ45 connectors for use with JBLCSR-V in-wall volume controls, and a universal power supply that accepts AC voltages from 100 to 240 VAC, 50/60 Hz. Plus, theyʼre built using HARMANʼs GreenEdge clean standards to offer numerous energy-efficient benefits, including a lighter weight, space-saving design, and conforming to RoHS standards. 4 or 8 inputs with 1 or 2 channel outputs Fanless, space-saving 1U design Configurable output routing (2 channel models only) Independent base/treble controls Euro-block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection Supports JBL CSR-V wall controller via Ethernet cable Priority muting, VOX ducking, and phantom power for all models

Weight 2.00 kg

Reviews

There are no reviews yet.

Be the first to review “JBL CSM-14 PRE-AMP 4IN & 1 OUT”

Your email address will not be published. Required fields are marked *

Quick Comparison

JBL CSM-14 PRE-AMP 4IN & 1 OUT removeREGA EAR Headphone Amplifier removeREGA Fono MC Phono Stage removeREGA Fono Mini A2D MM phono stage Preamplifier removeCAMBRIDGE AUDIO 851C Upsampling DAC, CD Player and Digital Pre-amplifier (Silver) removeN-AUDIO PP400 Phono-RIAA Amplifier remove
NameJBL CSM-14 PRE-AMP 4IN & 1 OUT removeREGA EAR Headphone Amplifier removeREGA Fono MC Phono Stage removeREGA Fono Mini A2D MM phono stage Preamplifier removeCAMBRIDGE AUDIO 851C Upsampling DAC, CD Player and Digital Pre-amplifier (Silver) removeN-AUDIO PP400 Phono-RIAA Amplifier remove
Image
SKUCSM-14EARFONO MC Phono stageFono Mini A2D851C SilverN-AUDIO PP400
Rating
Price 517.00 incl. GR VAT250.00 incl. GR VAT390.00 incl. GR VAT 353.00 incl. GR VAT 1,899.00 incl. GR VAT 31.82 incl. GR VAT
Stock

Available on backorder

In stock

In stock

In stock

In stock

In stock

AvailabilityAvailable on backorderIn stockIn stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Backed by the combined technological prowess of multiple HARMAN brands, the JBL Commercial Series Mixers (CSM) deliver unsurpassed quality in commercial sound. Easily configured for a range of applications, such as background music, security, and paging, CSM units are designed for everything from schools and hospitals to restaurants and fitness facilities. They feature RJ45 connectors for use with JBLCSR-V in-wall volume controls, and a universal power supply that accepts AC voltages from 100 to 240 VAC, 50/60 Hz. Plus, theyʼre built using HARMANʼs GreenEdge clean standards to offer numerous energy-efficient benefits, including a lighter weight, space-saving design, and conforming to RoHS standards. 4 or 8 inputs with 1 or 2 channel outputs Fanless, space-saving 1U design Configurable output routing (2 channel models only) Independent base/treble controls Euro-block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection Supports JBL CSR-V wall controller via Ethernet cable Priority muting, VOX ducking, and phantom power for all models

Developed by our engineers, the new Ear benefits from a completely new surface mount PCB layout based on the hugely successful Brio-R amplifier. Exceptional performance is guaranteed with the convenience of independent mute, volume control and multiple connectivity options to integrate perfectly into any users system.

Power Supplies & Noise Reduction

The Ear pushes the Brio-R power amplifier circuit concept to a new level with the use of a low noise, fully regulated, supply. Noise has also been kept to a minimum by the use of an external mains transformer. The Ear exceeds the voltage requirements of IEC 268-15. This along with low output impedance makes it suitable for studio use as well as a hi-fi headphone amplifier. The Ear operates in Class A at normal listening levels.

High Quality Components

The Ear utilises the highest quality components and our engineers’ experience, to achieve the best sonic performance. Utilising the design ideals of the ‘cascaded emitter follower output stage’ with a pair of complementary Darlington output transistors, along with polyester film and Nichicon FG capacitors in critical positions, ensures it is our most advanced performing headphone amplifier to date.

Custom Case

Housed in a compact custom case, the Ear is designed to match the current range of Rega electronics with a matching, high gloss, front facia.The new Ear Headphone amplifier benefits from an all new extruded aluminium case and new styling giving it more of a family feel to match its illustrious big brothers. The Ear simply connects to the tape output of an amplifier via phono leads. The headphones are plugged into the front panel and there is a link socket in case you need your tape output sockets for other use.

Hi Fi News reviews the Rega Ear headphone amplifier:

\'The Rega Ear is lovely, in so many ways. It is beautifully made, stylish and has all the facilities you really need, plus a delightful sound that stirs the soul regardless of whatever music you put through it. Wonderfully expansive and big hearted, it makes listening a pleasure. Tonally it\'s slightly on the warm side, so suits poor quality sources down to the ground - even an iPad sounds good via the Rega!\' - January 2014.

  • Maximum output level - 25 load 775mW, 32 load 685mW, 50 load 530mW, 100 load 320mW, 600 load 60mW
  • Open circuit voltage 6v
  • Input impedance 20K, Gain 28dB
  • Frequency response 12Hz to 37kHz
  • THD typically 0.003%
  • Signal to noise ratio referenced to max output level -100dB (22Hz – 22kHz)
  • Maximum Power requirements - 24VAC at 225mA (685mW 32)
  • Dimensions: W 178mm x D 155mm x H 45mm.

The Fono MC is an exceptionally high quality MC phono stage designed to maximise the potential of any MC cartridge. Although specifically to compliment the latest Rega range of  moving coils you will find full adjustability for loading is available via dip switches conveniently placed on the rear panel with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.

The Fono MC has been designed to be effective, easy to use, and above all, to reproduce music. The Fono MC uses the Linear Systems low noise LSK389 FET in an all discrete input stage where low noise and linearity are vitally important to get the best from an MC cartridge. Because of the high input impedance of FET, the loading effects of the amplifier circuit are minuscule and do not affect the performance of the cartridge.

A MUSE operational amplifier is used in the RIAA equalization amplifier. Polypropylene capacitors have been used in the signal path and in the RIAA equalization circuits. There is selectable input loading for both resistance and capacitance along with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.

The aesthetic design of the Fono MC was as important as the quality of its electrical capabilities, so it benefits from the same aluminium case as the Rega TTPSU and Fono MM amplifier, giving it a design which offers a familiar feel and moreover brings it in line with its illustrious bigger brothers. The new Fono MC circuit resulted from the design work carried out on the Aria phono amplifier.

The Fono disk stage is designed to amplify the signal from a moving coil cartridge to a level which can feed into a 200mV line level input on a standard hi-fi amplifier.

Specifications

Output impedance = 200Ω
Recommended minimum output load resistance = 5K
Frequency response (50KΩ output load) = 13Hz (-3dB) to 100KHz (-0.3dB)
RIAA accuracy (50KΩ output load) = Better than +/-0.2dB 100Hz to 100KHz
Power requirements = 24V AC at 150mA maximum. Only to be used with Rega PS1.

Input sensitivity (for 200mV output)
4 off = 133uV
4 on = 67uV

Input loading resistance
1 and 2 off = 400Ω
1 on = 100Ω
2 on = 150Ω
1 and 2 on = 70Ω

Input loading capacitance
3 off = 1000pF
3 on = 4300pF
Gain (at 1KHz)
4 off = 63.5dB
4 on = 69.5dB

Maximum input level (at 1KHz)
4 off = 6.7mV
4 on = 3.4mV

Load settings for adjustable MC stages

Impedance -100ohm
Capacitance - 1000pF
Gain setting - High (\'On\' position for Rega phono stages)

Fono MC dip switches settings (factory set at Rega for Rega MC models).

The Rega Fono Mini A2D is a high quality phono pre-amplifier for use with any moving magnet cartridge. The addition of USB interface allows you to easily transfer vinyl to your PC. The Fono Mini A2D is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an audio amplifier. The new Fono Mini A2D benefits from an extruded aluminium case and very user friendly front and back panels that make this phono pre-amplifier a very easy product to use. The Fono Mini A2D amplifier offers exceptional performance and incredible value for money and promises to be a valuable addition to any hi-fi set up. To transfer vinyl to your PC, you will need to install a digital audio editor. Such software is widely available as a free download (such as Audacity), from the internet. This is a simple interface which allows monitoring of volume and balance whilst transferring your audio to your PC hard drive. Audio editing software includes a level meter which indicates the output level achieved when playing a piece of vinyl. You should adjust the output as necessary via the ‘Level’ control located on the front panel. Always take special note of record levels to ensure optimum recording quality. This is a cost effective version of the Fono MM and based on the phono amplifier as used in the Brio-R amplifier. Simply switch on, sit back and enjoy!
  • Input sensitivity: 5mV for 500mV output
  • Input loading: 47k +100pF
  • Maximum input level: 70mV @ 1kHz
  • Output Impedance: 100 Ohms
  • Signal to noise ratio: 78dBA ref 5mV
  • Power requirements: 24VAC 85mA
  • Input for full scale digital output: 7.5mV
  • Dimensions  W 102mm x D 125mm x H 30mm

Azur 851C Upsampling DAC, CD Player and Digital Pre-amplifier Features

Digital to Analogue Converter featuring S/PDIF and Toslink digital inputs, AES/EBU balanced digital input and USB audio inputs (all 24 bit compatible)
CD playback
Optional digital volume and channel balance control
Balanced XLR and unbalanced RCA analogue audio outputs
USB Audio input allowing streaming of up to 24-bit/192kHz audio from computer
ATF2™ audio up-sampling to 24-bit/384kHz
Twin Analog Devices AD1955 24 bit DACs delivering superior sound-staging and stereo imaging
Selectable digital filters – linear phase, minimum phase, steep
Audiophile grade toroidal transformer delivering ultra-low low noise and distortion
Full metal casework design with thick brushed aluminium front panel and dual layer damped feet, giving enhanced resonance control
RS232 controllable
Eco-friendly Azur Navigator remote control with Cambridge Audio amplifier and iPod dock control
Available in black and silver finishes

 

Preamplifier PHONO *Transforms phono to line *Input stereo rca, output stereo rca & 1/4” TRS *Power supply DC 12V included
Weight2.00 kg1.50 kg1.50 kg1.00 kg6.00 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.00 kg
Weight 1.50 kg
Weight 1.50 kg
Weight 1.00 kg
Weight 6.00 kg
Weight 0.30 kg