| Content |
Backed by the combined technological prowess of multiple HARMAN brands, the JBL Commercial Series Mixers (CSM) deliver unsurpassed quality in commercial sound. Easily configured for a range of applications, such as background music, security, and paging, CSM units are designed for everything from schools and hospitals to restaurants and fitness facilities. They feature RJ45 connectors for use with JBLCSR-V in-wall volume controls, and a universal power supply that accepts AC voltages from 100 to 240 VAC, 50/60 Hz. Plus, theyʼre built using HARMANʼs GreenEdge clean standards to offer numerous energy-efficient benefits, including a lighter weight, space-saving design, and conforming to RoHS standards. 4 or 8 inputs with 1 or 2 channel outputs Fanless, space-saving 1U design Configurable output routing (2 channel models only) Independent base/treble controls Euro-block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection Supports JBL CSR-V wall controller via Ethernet cable Priority muting, VOX ducking, and phantom power for all models | The Rega Fono Mini A2D is a high quality phono pre-amplifier for use with any moving magnet cartridge. The addition of USB interface allows you to easily transfer vinyl to your PC. The Fono Mini A2D is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an audio amplifier. The new Fono Mini A2D benefits from an extruded aluminium case and very user friendly front and back panels that make this phono pre-amplifier a very easy product to use.
The Fono Mini A2D amplifier offers exceptional performance and incredible value for money and promises to be a valuable addition to any hi-fi set up.
To transfer vinyl to your PC, you will need to install a digital audio editor. Such software is widely available as a free download (such as Audacity), from the internet. This is a simple interface which allows monitoring of volume and balance whilst transferring your audio to your PC hard drive.
Audio editing software includes a level meter which indicates the output level achieved when playing a piece of vinyl. You should adjust the output as necessary via the ‘Level’ control located on the front panel. Always take special note of record levels to ensure optimum recording quality.
This is a cost effective version of the Fono MM and based on the phono amplifier as used in the Brio-R amplifier.
Simply switch on, sit back and enjoy!
- Input sensitivity: 5mV for 500mV output
- Input loading: 47k +100pF
- Maximum input level: 70mV @ 1kHz
- Output Impedance: 100 Ohms
- Signal to noise ratio: 78dBA ref 5mV
- Power requirements: 24VAC 85mA
- Input for full scale digital output: 7.5mV
- Dimensions W 102mm x D 125mm x H 30mm
|
WITH INTEGRATED ANALOGUE-TO-DIGITAL CONVERTER
Both Microsoft® Windows® and Apple® Mac OS® come with very simple audio recording software pre-installed. However, to take full advantage of the high-resolution recording facilities offered by the MM 008 ADC, we recommend recording software that can record at 24 bits/96 kHz and save lossless high-resolution audio files such as FLAC or Apple® Lossless.
ADC SOFTWARE
Thorens turntables can be considered state-of-the-art in hi-fi technology as they would extract even the most minute details from your precious vinyl records. The signals generated by the pickup cartridges are however very small and therefore must be amplified to a much higher level. Regrettably, most of today’s amplifiers are no longer equipped with a dedicated phono stage. This unfortunate situation was a good reason for Thorens to develop the TEP 302, a complete phono preamplifier including RIAA equalization, which was to complement the outstanding playback performance of our turntables.
The TEP 302 is a pure-bred Class-A amplifier which employs selected, very special low-noise operational amplifiers throughout. The circuitry has been optimized "by ear” after several extended listening sessions. Of course, the TEP 302 also features a 15-Hz subsonic filter in order to protect the woofers from dangerous excursions when a warped record is played. More details, more dynamics.
- Mode: MM/MC (switchable)
- Gain at 1 kHz: 40 dB (MM)/60 dB (MC)
- Input impedance (MM): 47 kΩ + 220 pF fixed
- Input impedance (MC): 47 kΩ + 1 nF (modifiable with external load plugs)
- Frequency response (flat): 20 Hz - 20 kHz ±0.3 dB
- Frequency response (-3 dB): 10 Hz - 50 kHz
- RIAA curve accuracy: ±0.3 dB
- THD+N: 72 dB (MC)
- Crosstalk: ≧40 dB
- Input sensitivity (MM): 3.29 mVrms for -10 dBV output (316 mVrms)
- Input sensitivity (MC): 0.325 mVrms for -10 dBV output (316 mVrms)
- Max. output voltage: 482 mVrms at 5 mVrms input (1 kHz)
- Output impedance: 47 Ω
- Input connections: 3 pairs of RCA sockets (left/right)
- Output connections: 1 pair of RCA sockets (left/right)
- Power supply: 24 V DC
- Power consumption: 3.5 W/15 mA
- Weight: 511 g (not including power supply)
- Dimensions (W x H x D): 150 x 50 x 117 mm
- A/D converter: Tenor TE7022L 24Bit Delta Sigma
- Sampling rates: 8,16, 32, 44.1, 48, 96 kHz
- USB output: USB 2.0, fully backward-compatible with USB 1.1
- Operating systems: Windows® 8, Windows® 7, Vista, XP, Mac OS®
| The PM7400MKII is a very easy to operate stereo pre-amplifier that is suitable for many applications like clubs, bars, restaurants, fitness, audiovisual, ... |
THORENS MM-FLEX
The Thorens MM-Flex phono preamp is a high-quality preamplifier with portability in mind. Attach it to any surface with the included velcro adhesive—and better yet, due to its size you can take it with you! The Thorens MM-Flex is ideal for the on the go audiofile who may find themselves in a warehouse, surrounded by a particularly large sound system...for whatever reason.
MM-FLEX FEATURES
- Compact MM phono preamplifier
- Attaches to rear of turntable with integrated Velcro strip
- Can be easily removed and re-fitted without irreversible modification
|
High rigidity metal frame
• Shielded power supply
• Separated toroidals for analogue and digital
• Rubber insulated aluminium feet
• WBT and Neutrik connectors
• Fully discrete analogue design
• Motorized ALPS blue series volume
control
• Buffer and Gain cards on socket for future
upgrades
• Metal machined remote control
• Trigger signal for link to Monoblock amplifier
|
Reviews
There are no reviews yet.