| Content |
• MM & MC capable
• True dual mono design
• Balanced XLR & unbalanced RCA In & Outputs
• Fully passive RIAA & DECCA equalisation
• Unique continously variable input impedance loading,
matches every cartridge (adjustment even while playing)
• RCA & XLR In & Out
• Superior low noise / low distortion
• Classy & elegant dip switches
• DC power supply (
• Metal casing protects against vibration and interference
• Faceplate silver or black
| Technical data | Pro-Ject Phono Box RS | | Input impedance | Fixed 10 ohms or 47kohms, | | | variable 10 - 1200 ohms | | Load capacity switchable | 100pF 200pF, 300pF, 420pF, 520pF | | Output impedance | 50 ohms | | Gain, MM / MC | RCA: 40, 50, 60 dB | | | XLR: 46, 56, 66 dB | | Signal to noise ratio | 80dB (91dB - IEC -A) | | THD | | | RIAA accuracy | within 0,3dB/20Hz - 20kHz | | SubsonIc | 20Hz / - 12dB | | Input | RCA & XLR | | Output | RCA & XLR | | Power supply | +2x 18V/300mA DC; 220 - 240V, 50Hz | | Power consumption | 150mA DC | | dimensions W x H x D (T with sockets) | 206 x 72 x 200 (210)mm | | |
2000g without power supply
|
Manual/Εγχειρίδιο
|
- Input impedance, MM 47kohms/120pF
- Input impedance, MC 100ohms/120pF
- Gain, MM 40dB
- Output voltage typically 300mV/1kHz at 3mV/1kHz (MM input)
- Gain, MC 60dB
- Output voltage typically 300mV/1kHz at 0,3mV/1kHz (MC input)
- Max. output 9,5V (1kHz)
- Noise floor, MM 86dB (94dB - A weighted)
- Noise floor, MC 68dB (75dB - A weighted)
- THD, MM 0,01%
- THD, MC 0,05%
- RIAA-equalisation curve accuracy 20Hz - 20kHz / max. 0,5dB
- A/D converter -Bit Delta Sigma
- USB output digital serial data protocol USB 1.1
- Operating systems Windows®, MacOS® and Linux®
- THD: 0.005% - Noise floor: 96dB - Dynamic range: 93dB - Outboard power supply: 16V/200mA AC, suitable for your country's mains supply
- Power consumption: 16V/100mA AC -Dimension W x H x D: 103 x 38 x 115mm - Weight: 570g without power supply
Manual/Εγχειρίδιο
|
Azur 851C Upsampling DAC, CD Player and Digital Pre-amplifier Features
Digital to Analogue Converter featuring S/PDIF and Toslink digital inputs, AES/EBU balanced digital input and USB audio inputs (all 24 bit compatible)
CD playback
Optional digital volume and channel balance control
Balanced XLR and unbalanced RCA analogue audio outputs
USB Audio input allowing streaming of up to 24-bit/192kHz audio from computer
ATF2™ audio up-sampling to 24-bit/384kHz
Twin Analog Devices AD1955 24 bit DACs delivering superior sound-staging and stereo imaging
Selectable digital filters – linear phase, minimum phase, steep
Audiophile grade toroidal transformer delivering ultra-low low noise and distortion
Full metal casework design with thick brushed aluminium front panel and dual layer damped feet, giving enhanced resonance control
RS232 controllable
Eco-friendly Azur Navigator remote control with Cambridge Audio amplifier and iPod dock control
Available in black and silver finishes
|
THORENS MM-FLEX
The Thorens MM-Flex phono preamp is a high-quality preamplifier with portability in mind. Attach it to any surface with the included velcro adhesive—and better yet, due to its size you can take it with you! The Thorens MM-Flex is ideal for the on the go audiofile who may find themselves in a warehouse, surrounded by a particularly large sound system...for whatever reason.
MM-FLEX FEATURES
- Compact MM phono preamplifier
- Attaches to rear of turntable with integrated Velcro strip
- Can be easily removed and re-fitted without irreversible modification
|
- 11.2-Channel Preamplifier Configuration
- Dolby Atmos & DTS:X Compatibility
- RCA & Balanced XLR Pre-Outs
- Bluetooth, Wi-Fi, AirPlay Connectivity
- 7 x HDMI Inputs / 3 x HDMI Outputs
- HDR10, Dolby Vision, HLG Pass-Through
- HDMI Upscaling
- Works with Amazon Alexa
- Integrated AM/FM Tuners
Enjoy streaming audio and immersive multi-channel sound with your amplifier and the Yamaha AVENTAGE CX-A5200 11.2-Channel MusicCast Preamplifier. It sports an 11.2-channel XLR pre-out and features Dolby Atmos and DTS:X compatibility for object-based audio decoding. Built-in Bluetooth and AirPlay support allows the preamplifier to wirelessly stream music from compatible sources, such as smartphones and tablets.
Onboard Wi-Fi and Ethernet connectivity allows the AVENTAGE CX-A5200 to access music from your connected computer or NAS. Amazon Alexa compatibility enables you to control certain functions of the preamplifier with just your voice through your Alexa-enabled devices. With seven HDMI inputs and three outputs, the CX-A5200 can act as a video switcher for your HD source components. It will pass through HDR UHD 4K signals as well as HDR10, Dolby Vision, and HLG HDR formats. The preamplifier also has a USB port for accessing media stored on USB flash drives.
Note: Access to certain Internet-based content may require a subscription to a service.
Surround:AIThis AI technology built into the DSP analyzes the scene of your content and creates a surround effect to help reproduce it with augmented realism. In real time, this AI analyzes scenes by focusing on distinct sound elements, such as dialogue, background music, ambient sounds, and sound effects, and automatically enhances the surround effect to help provide greater realism.Dolby Atmos & DTS:XThese object-based sound technologies are designed to create realistic surround sound, positioning and moving individual sounds to nearly any virtual point in your room, including overhead.CINEMA DSP HD3In addition to Dolby Atmos, DTS:X, and conventional channel-based audio, a 3D space can be simulated in which separate acoustic elements can move freely, providing a sensation of the motion of sound effects above your head. CINEMA DSP HD3 uses signal processing algorithms to help heighten this sense of realism.YPAO-RSC (Reflected Sound Control)YPAO-RSC analyzes the room acoustics with the included microphone to tune your system for optimal sound in your room. It uses RSC to correct early reflections for enhanced sound. YPAO 3D is designed to provide automatic sound parameter optimization that maximizes the 3D sound field of CINEMA DSP HD3 as well as Dolby Atmos and DTS:X, and with 64-bit EQ calculations, this technology helps produce natural room acoustics.Dual ESS SABRE PRO Premier (ES9026 PRO) DACsIncorporating two ESS SABRE PRO Premier (ES9026 PRO) DACs helps further enhance the signal-to-noise ratio and achieve up to 32-bit performance.Large Power Transformer with Vibration Dampening PlateThe CX-A5200 features a large power transformer to help maximize performance and precision. Deep, powerful sound is achieved with enhanced regulation of power, while a thick brass plate helps dampen unwanted vibrations.Thick Bottom PlateStabilizing the chassis is the key to enhanced performance and sound. The CX-A5200 achieves this by employing a thick bottom plate, which acts to steady and immobilize the entire structure and achieve optimal sound.Balanced Connections and XLR TerminalsElectrical noise is an inherent issue with cabling due to connection with other A/V components, the connections between them, and from other sources of external noise. To ensure that the CX-A5200 is not affected by such distortion, it uses balanced, noise-resistant terminals. Even the RCA unbalanced connections use a ground-sensing transmission method that achieves simple balanced transmission. Further, the XLR terminals allow for the use of long cables. The CX-A5200 also allows a balanced audio input connection from audiophile-grade source components such as CD players.Built-In Streaming ServicesWith built-in music streaming services and connectivity options, you can enjoy all your content, including Internet radio stations and music from your compatible smart devices with the CX-A5200.Voice Control with Amazon Alexa and MusicCastWith Alexa voice control integration, all you have to do is ask. Use any Alexa-enabled device to control either the amplifier by itself or multiple MusicCast devices throughout your home.Bluetooth and AirPlay CompatibilityThe CX-A5200 features Bluetooth connectivity for simple, convenient wireless msuic streaming from your compatible smart devices, including smartphones, tablets, and laptops. iTunes and iOS users can use AirPlay to wirelessly stream audio seamlessly from compatible devices.MusicCast for Whole-Home MusicMusicCast makes it easy to share audio throughout the home using your Wi-Fi network. The CX-A5200 is designed to work seamlessly with other MusicCast products, including multi-room streaming amplifiers, soundbars, wireless speakers, and hi-fi gear, and they\'re all controllable from the MusicCast app or from a third-party control system such as Control4, RTI, or ELAN.Additional Features
- 34 Cinema DSP programs
- Dialogue level adjustment
- Virtual presence speaker & virtual surround back speaker
- Dialogue lift (no presence speakers required)
- Virtual CINEMA FRONT
- Pure Direct (with video on mode)
- Compressed music enhancer
- High-resolution music enhancer
- YPAO Volume
- Adaptive DRC (Dynamic Range Control)
- Initial volume and maximum volume setting
- A.R.T. Wedge
- 0 to 500 ms audio delay
- Analog to HDMI & HDMI to HDMI upscaling
- Video adjustment
- Deep Color, x.v.Color, 24 Hz refresh rate, and auto lip-sync support
- HDR10, Dolby Vision, HLG, and BT.2020 support
- HDMI CEC (SCENE, device control)
- Graphical user interface
- Eight SCENE PLUS sets
- App control (iOS/Android)
- Web browser control
- Full LED-backlit remote control
- Zone GUI
- Party Mode
- Auto Power Standby
- ECO Mode
| Audio |
|---|
| Audio Formats |
Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS:X, DTS-HD Master Audio |
| D/A Converter |
2 x ESS 384 kHz / 32-bit SABRE PRO Premier DAC ES9026PRO for all channels |
| Video |
|---|
| HDR Support |
HDR10, Dolby Vision, HLG pass-through |
| HDCP Version |
2.2 |
| Upscaling |
Up to 4K/60p, 4:4:4, analog to HDMI, HDMI to HDMI |
| Physical Specifications |
|---|
| Power Requirements |
120 VAC, 60 Hz |
| Standby Power Consumption |
≤0.1 W |
| Dimensions (W x H x D) |
With Antenna Down: 17.13 x 7.5 x 18.63 / 43.5 x 19.05 x 47.31 cm
With Antenna Up: 17.13 x 10.63 x 18.63 / 43.5 x 26.99 x 47.31 cm |
| Weight |
33.5 lb / 15.2 kg |
| Bluetooth |
Version: 4.2
Supported Profiles: A2DP, AVRCP
Supported Codecs: SBC, AAC
Class: Class 2
Range: 33\' / 10 m |
| AirPlay |
Yes |
| Wi-Fi |
Yes, dual-band (2.4/5 GHz) |
| Supported File Types |
MP3, WMA, WAV, MPEG-4 AAC up to 48 kHz / 16-bit, ALAC up to 96 kHz / 24-bit, FLAC up to 384 kHz / 24-bit, AIFF up to 384 kHz / 32-bit, up to 11.2 MHz |
| Inputs |
7 x HDMI
2 x RCA component video
4 x RCA composite video
3 x optical TOSLINK
3 x digital coaxial
1 x 2-channel XLR
8 x stereo RCA (1 front)
1 x stereo RCA phono with ground screw
1 x 5.1-channel RCA
1 x USB (front) |
| Outputs |
3 x HDMI
1 x 11.2-channel XLR pre-out
1 x 11.2-channel RCA pre-out
2 x stereo RCA pre-outs (Zone 2/3)
1 x 1/4" / 6.35 mm headphone (front) |
| Other Ports |
1 x RJ45 Ethernet LAN
2 x 1/8" / 3.5 mm trigger out
1 x 1/8" / 3.5 mm remote in
1 x 1/8" / 3.5 mm remote out
1 x RS-232C
2 x wireless antennas
1 x FM antenna in
1 x AM antenna in
1 x 1/8" / 3.5 mm YPAO mic in (front) |
|
Both Microsoft® Windows® and Apple® Mac OS® come with very simple audio recording software pre-installed. However, to take full advantage of the high-resolution recording facilities offered by the MM 008 ADC, we recommend recording software that can record at 24 bits/96 kHz and save lossless high-resolution audio files such as FLAC or Apple® Lossless.
Specs:
- Mode: MM/MC (switchable)
- Gain at 1 kHz: 40 dB (MM)/60 dB (MC)
- Input impedance (MM): 47 kΩ + 220 pF fixed
- Input impedance (MC): 47 kΩ + 1 nF (modifiable with external load plugs)
- Frequency response (flat): 20 Hz - 20 kHz ±0.3 dB
- Frequency response (-3 dB): 10 Hz - 50 kHz
- RIAA curve accuracy: ±0.3 dB
- THD+N: 72 dB (MC)
- Crosstalk: ≧40 dB
- Input sensitivity (MM): 3.29 mVrms for -10 dBV output (316 mVrms)
- Input sensitivity (MC): 0.325 mVrms for -10 dBV output (316 mVrms)
- Max. output voltage: 482 mVrms at 5 mVrms input (1 kHz)
- Output impedance: 47 Ω
- Input connections: 3 pairs of RCA sockets (left/right)
- Output connections: 1 pair of RCA sockets (left/right)
- Power supply: 24 V DC
- Power consumption: 3.4 W/15 mA
- Weight: 504 g (not including power supply)
- Dimensions: (W x H x D): 150 x 50 x 117 mm
|
Reviews
There are no reviews yet.