| Content |
- Input impedance, MM 47kohms/120pF
- Input impedance, MC 100ohms/120pF
- Gain, MM 40dB
- Output voltage typically 300mV/1kHz at 3mV/1kHz (MM input)
- Gain, MC 60dB
- Output voltage typically 300mV/1kHz at 0,3mV/1kHz (MC input)
- Max. output 9,5V (1kHz)
- Noise floor, MM 86dB (94dB - A weighted)
- Noise floor, MC 68dB (75dB - A weighted)
- THD, MM 0,01%
- THD, MC 0,05%
- RIAA-equalisation curve accuracy 20Hz - 20kHz / max. 0,5dB
- A/D converter -Bit Delta Sigma
- USB output digital serial data protocol USB 1.1
- Operating systems Windows®, MacOS® and Linux®
- THD: 0.005% - Noise floor: 96dB - Dynamic range: 93dB - Outboard power supply: 16V/200mA AC, suitable for your country's mains supply
- Power consumption: 16V/100mA AC -Dimension W x H x D: 103 x 38 x 115mm - Weight: 570g without power supply
Manual/Εγχειρίδιο
|
SILVER
Bandwidth 5Hz to 90kHz, -3dB Maximum output
voltage 8.5Vrms (47 kOhm load)
Overall gain 40dB-60dB @ 1kHz selectable with
dip- switch.
Input Impedance 29 Ohm - 100 kOhm selectable
with dip-switch.Selectable input Capacitance.
Input Unbalanced 1 pair x channel (RCA)WBT
Output Unbalanced(RCA)WBT - MM,
high output
MC, low output MC.
Handmade Litz cable for this specific application
from White Gold. JFET differential built around Toshiba 2SK170 among the most noiseless transistor of the current production.
| Preamplifier PHONO
*Transforms phono to line
*Input stereo rca, output stereo rca & 1/4” TRS
*Power supply DC 12V included | User's manual
- Ultra compact phono preamplifier and equalizer
- Proper RIAA equalization
- RCA inputs and outputs
- 6.3 mm stereo headphone output connector
- Sturdy metal housing
- 12 V AC/DC adapter included
The LD Systems PPA 2 is a very compact analogue phono preamplifier, which equalises the extremely low output signal of conventional turntables to RIAA standards. It allows you to connect to devices without any phono input, such as mixers, PA power amplifiers or sound cards. The phono inputs are designed as RCA jacks, just like the line outputs; the PPA 2 also has a screw terminal for the ground conductor of the turntable and a 6.3 mm stereo jack for connecting a headset. The THD factor of the preamplifier is below 0.05% and the channel separation is -75 dB. The LD Systems PPA 2 uses a 12 V AC adapter; a bright LED indicates the power supply on the top of the sturdy metal chassis.
Product type
Other Studio and Recording Equipment
Type
Stereo Input / Stereo Output
Frequency response
RIAA Curve Hz
Signal-to-noise ratio
70 dB
THD |
• MM & MC capable
• True dual mono design
• Balanced XLR & unbalanced RCA In & Outputs
• Fully passive RIAA & DECCA equalisation
• Unique continously variable input impedance loading,
matches every cartridge (adjustment even while playing)
• RCA & XLR In & Out
• Superior low noise / low distortion
• Classy & elegant dip switches
• DC power supply (
• Metal casing protects against vibration and interference
• Faceplate silver or black
| Technical data | Pro-Ject Phono Box RS | | Input impedance | Fixed 10 ohms or 47kohms, | | | variable 10 - 1200 ohms | | Load capacity switchable | 100pF 200pF, 300pF, 420pF, 520pF | | Output impedance | 50 ohms | | Gain, MM / MC | RCA: 40, 50, 60 dB | | | XLR: 46, 56, 66 dB | | Signal to noise ratio | 80dB (91dB - IEC -A) | | THD | | | RIAA accuracy | within 0,3dB/20Hz - 20kHz | | SubsonIc | 20Hz / - 12dB | | Input | RCA & XLR | | Output | RCA & XLR | | Power supply | +2x 18V/300mA DC; 220 - 240V, 50Hz | | Power consumption | 150mA DC | | dimensions W x H x D (T with sockets) | 206 x 72 x 200 (210)mm | | |
2000g without power supply
|
Manual/Εγχειρίδιο
|
The Fono MC is an exceptionally high quality MC phono stage designed to maximise the potential of any MC cartridge. Although specifically to compliment the latest Rega range of moving coils you will find full adjustability for loading is available via dip switches conveniently placed on the rear panel with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.
The Fono MC has been designed to be effective, easy to use, and above all, to reproduce music. The Fono MC uses the Linear Systems low noise LSK389 FET in an all discrete input stage where low noise and linearity are vitally important to get the best from an MC cartridge. Because of the high input impedance of FET, the loading effects of the amplifier circuit are minuscule and do not affect the performance of the cartridge.
A MUSE operational amplifier is used in the RIAA equalization amplifier. Polypropylene capacitors have been used in the signal path and in the RIAA equalization circuits. There is selectable input loading for both resistance and capacitance along with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.
The aesthetic design of the Fono MC was as important as the quality of its electrical capabilities, so it benefits from the same aluminium case as the Rega TTPSU and Fono MM amplifier, giving it a design which offers a familiar feel and moreover brings it in line with its illustrious bigger brothers. The new Fono MC circuit resulted from the design work carried out on the Aria phono amplifier.
The Fono disk stage is designed to amplify the signal from a moving coil cartridge to a level which can feed into a 200mV line level input on a standard hi-fi amplifier.
Specifications
Output impedance = 200Ω
Recommended minimum output load resistance = 5K
Frequency response (50KΩ output load) = 13Hz (-3dB) to 100KHz (-0.3dB)
RIAA accuracy (50KΩ output load) = Better than +/-0.2dB 100Hz to 100KHz
Power requirements = 24V AC at 150mA maximum. Only to be used with Rega PS1.
Input sensitivity (for 200mV output)
4 off = 133uV
4 on = 67uV
Input loading resistance
1 and 2 off = 400Ω
1 on = 100Ω
2 on = 150Ω
1 and 2 on = 70Ω
Input loading capacitance
3 off = 1000pF
3 on = 4300pF
Gain (at 1KHz)
4 off = 63.5dB
4 on = 69.5dB
Maximum input level (at 1KHz)
4 off = 6.7mV
4 on = 3.4mV
Load settings for adjustable MC stages
Impedance -100ohm
Capacitance - 1000pF
Gain setting - High (\'On\' position for Rega phono stages)
Fono MC dip switches settings (factory set at Rega for Rega MC models). |
Reviews
There are no reviews yet.