| Content | | For a long time, installers worldwide have been unhappy with consumer electronics and they were looking for a professional integrated amplifier for use in commercial environments, boardrooms or small businesses designed for 24/7 operation. Therefore Apart developed the CONCEPT1, a stereo or two mono channel (2 x 80 watts @ 4 ohms) amplifier for small and medium-sized projects.
This CONCEPT1 2-zone integrated stereo amplifier can operate with one stereo zone, two volume-linked mono zones or two individual-volume mono zones. The unit can be controlled via RS232 what makes integration into your AV solution possible. The built-in limiters and system design guarantee a failsafe solution 24 hours a day, 7 days a week.
To make the life of the end-user as easy as can be, the CONCEPT1 has user settings and installer settings. Only the absolute
| 19" (483 mm wide) rack mounting |
Yes |
height- rack units (1U=44 mm) |
2 U |
| depth (build in) |
293 mm |
power supply |
230 VAC volts |
| power consumption (max) |
< 200 watts |
output power RMS 4 ohms |
2 x 80 watts |
| output power RMS 8 ohms |
2 x 60 watts |
music program power |
100 watts |
| minimum impedance load |
4 ohms |
zone outputs |
2 |
| MIC inputs balanced |
1 |
line input unbalanced |
4 |
| tone control |
Yes |
RS232 (serial communication port) |
Yes |
| priority switch |
2 |
priority levels |
1 |
| cooling system |
convection |
applicable low impedance |
Yes |
| • Master outputs with 3 way tone control
• Special front input for phone/mp3 devices
• Zone control for 3 balanced outputs
• 1 Mic, 7 Line, 2 Phono inputs
The IMIX-5.3 is a basic 3 zone control mixer. It has a logical design and all functions are very clear and easy to control. Each channel has 3 output buttons to route the channel to your desired area/zone. All outputs have their own EQ settings and with the PFL function you can monitor each area/zone with a pair of headphones. At the front it has direct inputs for microphone, line and a phone/mp3 device.
Specifications Input channels: 1 x Microphone, combo XLR/Jack
7 x Line, RCA
2 x Phono, RCA
1 x Phone, 3,5mm jack
Output channels: 3 x Master (Balanced), XLR/RCA
1 x Headphones, 6.3mm Jack
Master EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Mic EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Frequency response: 20Hz – 20Khz
T.H.D.: | LD Systems ZONE 624 4-Zone Mixer
The ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote-controlled switching mute. Due to its extensive connectivity the ZONE 624 is the extremely flexible control centre solution for PA systems in food outlets, clubs, hotels, fitness centres, and many other areas.
The two balanced microphone inputs have a shared 3-band EQ, 12V phantom power and Talkover functions; the Talkover attenuation can be individually set for all zone outputs on the back of the unit. The 6 stereo input channels of the ZONE 624 are equipped with gain control, signal and peak LEDs, 45 mm faders, Cue buttons and RCA connections; channel 6, in addition with balanced TRS inputs for FOH signals. The device also has a switchable Aux input via 3.5mm mini jack and a USB port, that is used as a stereo input and output (recording out) and turns the ZONE 624 into an external audio interface.
The master section outputs are electronically balanced and use XLR connectors and terminal block connectors. The stereo zone also has unbalanced RCA connectors. The maximum output level for all of the zones can be individually set. The three mono outputs of the ZONE 624 each have a 2-band EQ, a selectable 100 Hz high pass filter, and a MIC mute switch with a level indicator; the inputs 1-6 or the stereo master signal can be selected as a source. The stereo output is equipped with a 3-band EQ, a control for the Talkover sensitivity and two LED chain level meters. Furthermore, the ZONE 624 has a recording output and a controllable PFL headphone jack for previewing.
- Type: stereo
- Number of Zones: 4 (Master, Zone A-C)
- Installation Height: 3U
- Total Input Channels: 8 (2x Mic, 1x AUX/Line, 2x Phono/Line, 2x Line, 1x FOH/Line
- Frequency Response: 20 - 40.000 Hz
- Microphone Channels: 2 (with phantom power 12 V)
- Microphone Channels Connections: 2X 6.3 mm jack (balanced), 1x XLR / 6.3 mm jack (Combo)
- Microphone Channel Controls: 2x Gain, 2x On/Off, 1 x EQ Hi, 1x EQ Mid, 1 x EQ Low, 1x Talkover
- Microphone Channels Display Elements: On-LED
- Microphone Channels Input Impedance: 4 kOhm
- Microphone Channels Input Sensitivity: 4.5 mV
- Microphone Channels THD: 0,08 %
- Line Channels: 6 (Input 1: Aux/Line, Input 2 + 5: Line/Phono, Input 3: USB/Line 4: Line, Input 6: Line/FOH
- Line Input Connectors: Input 1: 2 x RCA + 3.5 mm stereo jack, input 2.4 5: 2 x RCA, input 3: 2 x RCA, input 6: 4 x RCA + 2 x 6.3 mm jack
- Line Channel Controls: Gain, AUX enable, Cue, Level, 2x Phono/Line, FOH On
- Line Channels Display Elements: Signal/0 dB-LED, Cue-LED
- Line Channel Input Impedance: 6 Kohm (Phono 50 kOhm)
- Line Channels Input Sensitivity: 2,1 V (Phono 25 mV)
- Line Channels THD: 0,02 % (Phono 0,05%)
- input sensitivity AUX/Line (3.5 mm stereo jack): 3 V
- Line Outputs: 5 (Master - Stereo, 3x Zone - Mono, Rec - Stereo)
- Master Output Connectors: 2 x XLR (balanced), RCA (2 x), Terminal Block
- Master Controls: Level, EQ Hi, EQ Mid, EQ Low, Max. Level, T/O Sensitivity, T/O Damping
- Master Display Elements: 2 x 10 segment level meter
- Master Output Levels: 24 dBu (balanced), 17 dBu (unbalanced)
- Zone Output Connections: XLR (balanced), Terminal Block
- Zone Controls: Level, Source, Cue, EQ Hi, EQ Low, Max Level, 100 Hz High Pass, Include Mic, T/O Damp
- Zone Display Elements: 5-segment level meter
- Zone Output Levels: 24 dBu (balanced/ unbalanced)
- Output Connections Rec: 2 x RCA
- Headphone Output: 1
- Headphone Out Port: 6.3 mm jack stereo
- Headphone Output Controls: Cue Volume
- Headphone Output Voltage: 2,5 V 32 Ohm
- Additional Inputs: 2 (Emergency Input, Output Mute)
- Additional Input Connections: Terminal Block
- Additional Input Controls: Level Emergency Input
- Emergency Input Sensitivity: 5 V
- Additional Controls: power switch
- Additional Display Elements: Power-LED
- Operating Voltage: 220 - 250 V AC, 50 Hz
- Power Socket: IEC power socket
- Power Consumption (max.): 25 W
- Fuse: T 500 mAL / 250 V
- Dimensions (W x H x D): 485 x 132 x 210 mm
- Accessories included: terminal blocks, power cable, operating instructions
| REVAMP4240T is a professional 4-channel digital power amplifier with 4 x 240 watt output power @ 100 volt, but the unit is also bridgeable to 2 x 480 watts @ 100 volt. The unit incorporates a high efficient SMPS power supply and outputs with efficient Class D output topology. REVAMP4240T is the ideal amplifier for applications with 4 zones in mono, 2 zones in stereo or even bridged dual mono or bridged stereo systems. This amplifier contains an intelligent variable speed cooling fan that only will be activated in case of emergency.
In order to match each input to its respective source the input sensitivity can be adapted to your needs. The input stage also features a build-in 250 Hz HP-filter to optimise the system for use on horn speakers whenever you would need this. Each pair of outputs can be bridged to give you 2 x 480 watts of output power! The very intuitive front display shows what is going on with one blink of an eye. The output power is constantly under control thanks to our own made limiter that prevents annoying pumping limiter sound but yet keeps the system fully under control and you still have that dynamic sound. Ease of use, high-tech, reliability and a wide versatility has never been as cleverly combined as in this REVAMP4240T amplifier. |
- 3 zones with routing facility of all input channels as desired
- 5 input channels with recessed gain controls on the rear panel, signal LED and super smooth dual-rail channel faders
- 2 microphone channels with level control, LED level meter, 3-way equalizer and talkover button
- Talkover level and response time adjustable
- Pre-fader listening (CUE) to the stereo input channels via adjustable headphone output
- Color illuminated rotary controls and rubber buttons
- Zone outputs with level control, 3-way equalizer and 10-digit stereo LED level meter
- 2 record outputs (independent of the master channels) with routing facility of all zone outputs as desired
- Inputs: 8 x line (stereo RCA), 2x line/phono (stereo RCA), switchable; 2 x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
- Outputs: 3 x master (optionally 3-pin XLR or stereo RCA) and 2 x record (stereo RCA)
- Operation via supplied power unit
- Rack installation, 2 U
- Ideal for restaurants, bars, theme parks, hotels and all applications where microphones need to be mixed with music (e.g. karaoke)
| Power supply: |
230 V AC, 50 Hz |
| Protection class: |
Protection class II |
| Power connection: |
Power supply cord with Euro plug (provided) |
| Frequency range: |
20 - 20000 Hz |
| S/N ratio: |
>60 dB line
>70 dB phono |
| THD: |
Line/phono <0,02 % at 1 kHz |
| Gain: |
Microphone 52 dB
Line 17 dB
Phono 53 dB |
| Housing color: |
Black |
| Zone output: |
3 adjustable zones |
| Control elements: |
Power switch, regular talkover, source selector |
| Status LED: |
Signal, chanal level meter, master level meter, peak, chanal source; CUE, Talkover, ON AIR, Routing |
| Connections: |
Input: Microphone via 2 x 3-pin XLR/6.35mm jack (F) combination socket (mounting version)
Input: line/phono via 2 x stereo RCA
Input: line via 8 x stereo RCA
Output: master via 3 x 3-pin XLR
Output: master via 3 x stereo RCA
Output: rec. via 2 x stereo RCA
Output: headphones via 1 x 6.3-mm-jack (bal.) |
| Channels: |
Input chanel: 2 x stereo with Line-Line/Phono switch via RCA, channel control via fader, 3-band tone control EQ, Routing master bus switch, gain control, source selector, CUE switch
Input chanel: 3 x stereo with Line-line switch via RCA, channel control via fader, Routing master bus switch, gain control, source selector, CUE switch
Microphon chanal: 2 x mono via Combination socket (XLR/jack), channel control via Rotary dial, ON AIR switch, Routing master bus switch, Talkover switch,
Master output: 3 x stereo via XLR or RCA, channel control via Rotary dial, 3-band tone control EQ
Rec. output: 1 x stereo via RCA, Routing master bus switch,
Headphones output: 1 x stereo via Jack, channel control via Rotary dial, Cue-mix-function, |
| Housing design: |
(19") 48.3 cm rack installation 2 U |
| Dimensions: |
Width: 48,3 cm
Depth: 14,8 cm
Height: 8,9 cm |
| Weight: |
3,10 kg |
|
Reviews
There are no reviews yet.