Content |
The Jensen 'C' Series provides pristine vintage tone coupled with the cost and weight advantages of ceramic magnets. Originally developed in the 1960s to meet the ever increasing demands of the emerging pop music industry, the 'C' Series has remained influential ever since. 4 or 8 ohms.
Crystal clear tone with brightly shining highs. The C8R responds to overdrive distortion with a bright fuzz lead voice.
- Ceramic magnet
- Vintage vibe
|
- 96 dB Sensitivity 1 W / 1 m
- 200 W Power Handling
- 2" Aluminium Sandwich Voice Coil for low Power Compression
- Double treated Cone for Water Protection
- Neodymium Magnet System
- Triple Aluminum demodulating Rings for ultra low Distortion
- Optimal for compact 2- or 3-way Systems
|
Recone kit for FP8PR200 |
Nominal Specifications
* Nominal Diameter 8“, 200 mm
* Overall Diameter 8.81/8.18“, 223.8/207.9 mm
* Bolt Circle Diameter 8.27“, 210 mm
* Baffle Cutout Diameter 7.24“, 184 mm
* Depth 4.59“, 116.7 mm
* Flange and Gasket Thickness 0.42“, 10.7 mm
Electrical Specifications
* Minimum Impedance 6.5 Ohm
* Nominal Impedance 8 Ohm
* Nominal Power Handling*** 150 W
* Maximum Power Handling**** 300 W
* Sensitivity (1W/1m) 94 dB
* Frequency Range 80 - 6300 Hz
* Voice Coil Diameter 2“, 52 mm
* Winding Material Aluminium
* Former Material Glass Fiber
* Winding Depth 0.53“, 13.5 mm
* Magnetic Gap Depth 0.31“, 8 mm
* Flux Density 1 T
THIELE & SMALL Parameters
* Resonant Frequency (fs) 76 Hz
* DC Resistance (Re) 5.8 Ohm
* BL Product (BL) 9.86 N/A
* Diaphragm Mass inc. Airload (Mms) 20.9 grams
* Mechanical Compliance of Suspension (Cms) 0.2 mm/N
* Rms 2.11 Kg/s
* Electromagnetic Q (Qes) 0.59
* Mechanical Q (Qms) 4.72
* Total Q (Qts) 0.53
* Compliance Equivalent Volume (Vas) 0.42 ft³, 11.9 dm³
* Surface Area of Cone (Sd) 31“², 200 cm²
* Maximum Linear Excursion (Xmax)* 5.42 mm
* Xdamage** 12 mm
* Coil Inductance (Le) 0.55 mH
* Diaphragm mass (Mmd) 19.4 g
* Eta Zero 0.85 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
|
-
- 8” neodymium magnet driver with 1.5” voice coil, providing 200Wrms (AES) continuous power handling
- Suitable for line array applications, utilizing a space-efficient octagonal chassis profile
- Optimized flux distribution in the magnet assembly provides low harmonic distortion
- M-roll surround provides progressive excursion control, generating a smooth frequency response
- Intelligent heat management in both chassis and magnet assembly design offers reduced thermal compression
General specifications
Nominal diameter (mm/in) |
203/8 |
Power Rating (AES, W rms) |
200 |
Nominal impedance (Ω) |
8 |
Voice coil diameter (mm/in) |
50.8/2.0 |
Magnet type |
Neodymium |
Chassis type |
Cast aluminium |
Sensitivity (dB) |
92 |
Frequency range (Hz) |
70-6000 |
Coil material |
Round copper |
Cone material |
Kevlar loaded paper |
Surround material |
Cloth-sealed |
Suspension |
Single |
Xmax (mm/in) |
4/0.16 |
Gap depth (mm/in) |
8.0/0.32 |
Voice coil winding width (mm/in) |
15.0/0.63 |
Small Signal Parameters
D (m/in) |
0.17 |
Fs (Hz) |
80.3 |
Mmd (g/oz) |
22.39 |
Mair |
1.94 |
Qms |
1.33 |
Qes |
0.59 |
Qts |
0.41 |
Re (Ω) |
5.85 |
Vas (lt/ft3) |
11.3/0.399 |
BI (Tm) |
11.22 |
Cms (mm/N) |
0.16 |
Rms (kg/s) |
9.6 |
Le (mH) |
|
Mounting Information
Overall diameter (mm/in) |
225/8.8 |
Overall depth (mm/in) |
100/4.16 |
Cut-out diameter (mm/in) |
187/7.4 |
Mounting slot dimensions (mm/in) |
6.5/0.26 |
Number of mounting slots |
8 |
Mounting slot PCD/ width accross flats |
210/8.3 |
Unit weight (kg/lb) |
1.52/3.34 |
|
- 93 dB sensitivity 1 W / 1 m
- 200 W + 80 W Power Handling
- 2" + 1.75" Sandwich Voice Coil
- Single Point Source providig coherent Wave Front
- 90° conical Dispersion
- Optimal for compact 2- or 3-way Systems
|
Reviews
There are no reviews yet.