Content | New J series
More technology for improved performance and quality value for money
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
NL-4 Neutrik™ Speakon input and link connectors
Code: |
37714 |
Configuration: |
2 way |
Recommended amplifier: |
300 W RMS |
Long Term power: |
150 W |
Short term power: |
600 W |
Nominal impedance: |
8 ohm |
Frequency response: |
55Hz - 20HHz -6dB |
Low Frequency woofer: |
12 - 2 coil inch |
High frequency driver: |
1 - 1 coil inch |
Sensitivity (@1W/1m): |
98 dB |
Maximum SPL cont/peak: |
123 / 127 dB |
Dispersion: |
90°x60° HxV |
Crossover Frequency: |
2 KHz |
Recommended HP filter: |
45hz - 24dboct |
Input connector: |
2 x speakon NL4 in & Thru |
Net Dimension (WxHxD): |
410x663x387 - 16.14x26.10x15.23 mm/inch |
Net Weight: |
14.1 / 31.8 kg/lb |
Transport Dimension (WxHxD): |
495x740x475 - 19.48x29.13x18.70 mm/inch |
Transport Weight: |
17.2 / 37.91 kg/lb |
|
The C5212 L is a full range extremely narrow dispersion two-way loudspeaker system for medium throw applications.
The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The 60° x 40° horn design offers higher sensitivity for longer distance applications.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.
Features |
---|
60° x 40° CMD (Constant Matching Design) constant directivity horn | 1.4" neodymium compression driver with 2.5" diaphragm assembly | 12" woofer with 3" voice coil | Dual-function design: built in passive crossover or external bi-amp | Rotatable Horn System for horizontal cabinet mounting applications | HF driver AMCDP (Active Mosfet Compression Driver Protection) | LICC (Low Impedance Compensated Crossover) network |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 54 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 65 Hz | ÷ 20 kHz | Max SPL @ 1m: | 133 dB | | Horizontal coverage angle: | 60° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 10 | | System Sensitivity: | 100 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 500 Watt | | Peak Power Handling: | 2000 Watt | | Recommended Amplifier: | 1000 | | Protections: | Dynamic | | Crossover frequencies: | 1200 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 2“HF driver, 2.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 100 Watt AES | | Sensitivity: | 111 dB | | Woofer: | 12“woofer, 3" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 400 Watts AES | | Sensitivity: | 98 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 - Full range or Bi-Amp | | Output connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 9 x M10 inserts | | Handles: | 2 on side | | Pole Mount/Cap: | Yes | | Grille: | Custom perforated steel grille | | Colour: | Black, white, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 600/23.62 mm/inch | | Width: | 364 / 14.33 mm/inch | | Depth: | 385 / 15.16 mm/inch | | Net Weight: | 23 / 50.7 Kg/Lbs | |
|
The DYNACORD VL212 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications. The VL212 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two rugged DND 12350 transducers are used. The in-line topology guarantees excellent pattern control even for the low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL212 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations. The VL212 can be used as a general purpose stand-alone fullrange cabinet and as a satellite or delayed system cabinet in larger set ups.
Order No. D 113 133 Cabinet Full-Range Configuration Passive 2-Way Switchable to biamped mode Nominal impedance 4 Ohms Rated power RMS 800 Watts Program power 1600 Watts Peak power 3200 Watts SPL 2,83 V / 1m 2W / 4 Ohm 105 dB Max. SPL 1m (calculated with peak power) 137dB Frequency range ( -10dB ) Full range 80Hz - 19kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 50Hz - 19kHz Coverage angle 1 kHz -6dB 90° * 45° Passive crossover frequency 1.5kHz Active crossover frequency 1.5kHz 24dB/Oct. Linkwitz-Riley, 1,5kHz Linear-Phase FIR Voice coil tracking protection Yes Component HIGH Electro-Voice ND6-8 Neodymium Order No. 361493 Component LOW 2 x DND 12350 Order No. 366559 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connectors Biamped Lo 1+, 1- Hi 2+, 2- Wired through 1+, 1-, 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) 385x1035x374mm Shipping weight kg Net weight 34kg Enclosure material Birch plywood Finish Black, 2-component paint Grille Powder coated steel, acoustic foam Handles 2
|
With the newly designed D12W, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffle by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.
|
With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fi xed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road. For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffl e by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.
Cabinet Full-Range Configuration Passive 2-Way Nominal Impendance 8 ohms Rated power RMS 300 W Program power 600 W Peak power 1200 W SPL 2,83V / 1m (1W/8 ohms) 98 dB Max. SPL 1m (calc. with peak) 129 dB Frequency range (-10dB) 70Hz - 18 kHz Nominal Coverage angle 80° x 40° Passive crossover frequency 1,5 kHz Voice ceil tracking protection Yes Component High ND2 S-8 Component Low DL 12 BFH Connectors 1+/1- Wired through 2+/2- Connector model Speakon 2x NL4 MPR Dimensons (WxHxD) mm 429,5 x 596 x 320,5 Shipping weight 17 kg Net weight 16 kg Enclosure material Polypropylene Finish Black Grille, Steel Powder coated Front b/w Acoustic Foam Handles 1 |
Hχείο 2 δρόμων με ομοαξονική διάταξη των tweeters (array), woofer 12“, tweeter 6 X 0,5“, 300W program, 8Ω, διασπορά 90° X 40°, απόκριση συχνότητας 80Hz-20kHz, 97dBSPL/1W/1M, Καμπίνα πολυπροπυλενίου, weather resistant, μαύρο χρώμα, (361 (W) Χ 448 (H) Χ 320 (D)mm). Βάρος 8,5 Kg. |
Reviews
There are no reviews yet.