Content | New J series
More technology for improved performance and quality value for money
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
NL-4 Neutrik™ Speakon input and link connectors
Code: |
37714 |
Configuration: |
2 way |
Recommended amplifier: |
300 W RMS |
Long Term power: |
150 W |
Short term power: |
600 W |
Nominal impedance: |
8 ohm |
Frequency response: |
55Hz - 20HHz -6dB |
Low Frequency woofer: |
12 - 2 coil inch |
High frequency driver: |
1 - 1 coil inch |
Sensitivity (@1W/1m): |
98 dB |
Maximum SPL cont/peak: |
123 / 127 dB |
Dispersion: |
90°x60° HxV |
Crossover Frequency: |
2 KHz |
Recommended HP filter: |
45hz - 24dboct |
Input connector: |
2 x speakon NL4 in & Thru |
Net Dimension (WxHxD): |
410x663x387 - 16.14x26.10x15.23 mm/inch |
Net Weight: |
14.1 / 31.8 kg/lb |
Transport Dimension (WxHxD): |
495x740x475 - 19.48x29.13x18.70 mm/inch |
Transport Weight: |
17.2 / 37.91 kg/lb |
|
The MI-112 is a 2-way passive full range loudspeaker that utilizes a 12? cone low frequency transducer and a 1? throat compression driver with titanium diaphragm. The multi-angle cabinet is constructed of Complex Aggregate Board and finished with a hard-wearing black carpet. Two bar handles and a steel grille sealed against corrosion using a polyamide powder coat finish are provided. A 35 mm tripod socket allows for stand mounting. APPLICATIONS: Intended for use in portable sound reinforcement and P.A.
FEATURES: 2-way vented loudspeaker system 1 x 12" speaker 1" compression driver with constant directivity horn 225 W power handling Highly resistant CAB enclosure
SPECIFICATIONS: RMS (Average) Power HandlingR: 225 W Program Power HandlingP: 450 W Peak Power HandlingK: 900 W On-axis Frequency RangeF: 60 Hz - 16 kHz Nominal Impedance: 8 Ω On-axis Sensitivity 1W / 1 mS: 98 dB SPL Rated Peak SPL at Full Power:128 dB Nominal -6 dB BeamwidthsB: 90° Horizontal (average, 500 Hz to 8 kHz) 75° Vertical Speech Coverage AnglesC: 90° Horizontal x 80° Vertical Enclosure Material:Complex Aggregate Board Finish:Blue Gray carpet Connector: 2 paralleled NL4 Speakon, wired Dimensions (H x W x D): 59 x 43 x 35 cm / 26.5 x 19 x 15.4 in Weight: 20.3 kg/ 45 lbs Shipping Weight: 23.5 kg/ 52 lbs |
The C5212 L is a full range extremely narrow dispersion two-way loudspeaker system for medium throw applications.
The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The 60° x 40° horn design offers higher sensitivity for longer distance applications.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.
Features |
---|
60° x 40° CMD (Constant Matching Design) constant directivity horn | 1.4" neodymium compression driver with 2.5" diaphragm assembly | 12" woofer with 3" voice coil | Dual-function design: built in passive crossover or external bi-amp | Rotatable Horn System for horizontal cabinet mounting applications | HF driver AMCDP (Active Mosfet Compression Driver Protection) | LICC (Low Impedance Compensated Crossover) network |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 54 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 65 Hz | ÷ 20 kHz | Max SPL @ 1m: | 133 dB | | Horizontal coverage angle: | 60° | | Vertical coverage angle: | 40° | | Directivity index; Q: | 10 | | System Sensitivity: | 100 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 500 Watt | | Peak Power Handling: | 2000 Watt | | Recommended Amplifier: | 1000 | | Protections: | Dynamic | | Crossover frequencies: | 1200 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 2“HF driver, 2.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 100 Watt AES | | Sensitivity: | 111 dB | | Woofer: | 12“woofer, 3" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 400 Watts AES | | Sensitivity: | 98 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 - Full range or Bi-Amp | | Output connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 9 x M10 inserts | | Handles: | 2 on side | | Pole Mount/Cap: | Yes | | Grille: | Custom perforated steel grille | | Colour: | Black, white, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 600/23.62 mm/inch | | Width: | 364 / 14.33 mm/inch | | Depth: | 385 / 15.16 mm/inch | | Net Weight: | 23 / 50.7 Kg/Lbs | |
|
With the newly designed D12W, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffle by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.
| Axial Sensitivity 94 dB
Case Material 9-ply, 15mm Plywood, Internally Braced, with Texured Paint
Frequency Response (-3 dB) 82 Hz - 18 k Hz
Frequency Response (-10 dB) 55 Hz - 20 k Hz
Recommended High-Pass Frequency 45 Hz
Max. SPL/1m (calc) 132 dB
Coverage
(Nominal -6 dB) H° 90 °
Coverage
(Nominal -6 dB) V° 50 °
LF Transducer (1) EVS-12K, 305mm (12”) Woofer
HF Transducer DH-1K, 39mm (1.5”) Titanium Diaphragm Compression Driver
Crossover Frequency 2.1 k Hz
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 7 Ω
Connector Type Dual NL4
Grill 18GA Steel with Black Powdercoat
Height 607 mm (23.9“)
Width 362 mm (14.25“)
Depth 340 mm (13.39“)
Weight Net 15.8 kg (34.83 lbs)
Shipping Weight 20 kg (44.09 lbs) | The Electro-Voice ZX3 offers an unprecedented level of lightweight 12-inch two-way loudspeaker performance for the widest variety of portable and installed applications. Featuring the new DVX3121 12-inch woofer and the ND2 neodymium compression driver, ZX3 continues the groundbreaking innovation of the Electro-Voice DVX woofer program, joining the ranks of EVs ZX series between the 8-inch ZX1 and the 15-inch ZX5.
When it comes to problem/solution versatility, ZX3 is truly in a class of its own. In addition to the highest performance drivers available, a complete range of optional accessories, including the CB-5 array kit, MB3 wall/ceiling mount bracket, HA-3 handle adapter for use with the VSA-1 strong arm mount, and TCA-1 truss clamp adapter, allow ZX3 to be easily and precisely configured in multiple box arrays, mounted on truss or tripods, deployed as monitors, or used as system mains with a subwoofer.
Housed in a stylish yet rugged injection molded enclosure, ZX3 shares the same functionality as the larger ZX5, with 90° x 50° or 60° x 60° horn dispersion patterns, 45° or 55° monitor angles, passive or bi-amp operation, and seven M8 rigging points. ZX3 is available in a weatherized version and in either black or white finish. The optional HDC-3 heavy duty stackable cover is also available.
Specifications
Frequency Response (-3dB) |
58 - 15000 Hz |
Frequency Response (-10dB) |
48 - 20000 Hz |
Sensitivity 1W/1m |
97 dB |
System Power Handling (continuous/program/peak) |
600/1200/2400 Watts |
Low Frequency Power Handling (continuous/program/peak) |
500/1000/2000 Watts |
High Frequency Power Handling (continuous/program/peak) |
40/80/160 Watts |
LF Transducer |
DVX3121 |
HF Transducer |
ND2 |
Enclosure Material |
Polypropylene |
Color |
Black |
Outdoor |
Yes |
Speaker Type |
Fullrange |
Weight Net |
19.8 kg ( 43.65 lbs ) |
|
Reviews
There are no reviews yet.