| Content |
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
| Code: |
37687 / 37905 White |
| Configuration: |
2 way |
| Built-in amplifier LF/HF: |
80/40 W RMS |
| Built-in amplifier peak LF/HF: |
160/80 W |
| Frequency response: |
80Hz - 20KHz -6dB |
| Low Frequency woofer: |
5 - 1 coil inch |
| High Frequency driver: |
1 dome - 0.75 coil inch |
| Maximum SPL cont/peak: |
113 / 117 dB |
| Dispersion: |
90° x 90° HxV |
| Input impedance: |
22 Kohm |
| Crossover Frequency: |
3.5 KHz |
| AC Power requirements: |
75 VA |
| Input connector: |
XLR combo with loop |
| Power cord: |
5 / 16.4 m/ft |
| Net Dimension (WxHxD): |
170x275x180 - 6.69x10.82x7.08 mm/inch |
| Net Weight: |
3.4 / 7.49 Kg/lb |
| Transport Dimension (WxHxD): |
240x345x235 - 9.44x13.58x9.25 mm/inch |
| Transport Weight: |
4.2 / 9.25 Kg/lb |
| | SDQ5P is a stereo loudspeaker set with 1 active and 1 passive loudspeaker that stands for reliability, affordability, dynamic music and detailed voice reproduction! The active stereo amplifier loudspeaker has a low distortion high efficiency 5.25” woofer and one output is fed to the second linkable passive loudspeaker.
The SDQ5P active loudspeaker is equipped with volume and tone controls, accurate clip indicators and a stereo 2 x 30 watts amplifier. This amplifier comes with high quality balanced inputs, a stereo RCA cinch input and a mini stereo jack input (PC, MP3 player ...). The balanced input allows long signal line without interference. You will not hear any hum or buzz, because there will be no ground loop issues when connecting the SDQ5P with notoriously difficult laptops, LCD projectors or interactive white boards.
These loudspeakers will give you a variety of sound possibilities when used in conjunction with a flat screen, projector or smart board. With their magnetic shielding these loudspeakers are the ideal and cost effective audio solution for your classroom, boardrooms or meeting room. Due to its stylish design, a seamless integration into every interior is assured. | The LD Systems SAT62AG2 is the active version of the SAT62G2. The compact 2-way speaker is not only suitable for installation, but also as a home studio monitor and for other sound reinforcement tasks.
The bass-reflex design is loaded with a 6.5" custom woofer and a 1" silk dome tweeter with wave guide, which are driven by a Class AB power amplifier with 50 W continuous power and overcurrent protection. The input is a XLR-jack combo socket, an XLR socket permits looping through of the signal. Reproduction is balanced and dynamic throughout the frequency range of 55 Hz - 20 kHz and attains a maximum sound-level pressure of 108 dB. The SAT62AG2 features a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The 12 mm MDF cabinet with a durable textured coating is available in black and white and equipped with M6 rigging points. An included mounting bracket offers additional possibilities for mounting; a universal joint mount is available as an accessory.
Specifications 6,5" Installation Monitor Active:
- Model Name: LDSAT62AG2W
- Type: Bass Reflex
- Components:
- Woofer: 6,5" Custom Made
- Compression Driver: 1" Custom Made
- Amplification: Class A / B
- Dispersion: 60° x 60°
- Power (RMS): 50 W
- Frequency Range: 55 Hz - 20 kHz
- SPL (1 W / 1 m): 89 dB
- Max SPL: 108 dB
- Protection: Over-current
- Controls: Volume, Switchable Auto / Power Mode
- Indicators: Power
- Connectors:
- Input: Line: XLR + Jack 6,3 mm Combo
- Output: Line: XLR
- Cabinet Material: 12 mm MDF
- Cabinet Surface: Painting
- Dimensions (W x H x D): 200 x 410 x 243 mm
- Additional features: M6 rigging / mounting points, mounting brackets
|
Two-way dual-12-inch horn-loaded MB/HF system. Adds long-throw "punch" to the capabilities of the medium and short-throw X-Series™ systems. Operates above 125 Hz, with low-frequency augmentation provided by full-range or low-frequency system. Dual, vertically stacked Hf drivers mount on a "twin format" 40° x 20° horn. Specifications Frequency Response (-3dB) 170 - 16000 Hz Frequency Response (-10dB) 125 - 20000 Hz Max. SPL / 1m (calc); full space 145 dB Coverage (nominal -6dB) H° 40 ° Coverage (nominal -6dB) V° 20 ° Rotatable Horn No Mid Frequency Power Handling (continuous/program/peak) 600/1200/2400 Watts High Frequency Power Handling (continuous/program/peak) 150/300/600 Watts MF Transducer (2) ND12A HF Transducer (2) ND6-16 MF Nominal Impedance 8 Ohms HF Nominal Impedance 8 Ohms Color Black Directivity Index 17.2 dB Flying Optional Flying Yes Input Connections 2 Neutrik® NL8 Outdoor No Chassis Size 12 inches Internal Crossover No Speaker Type Mid-High, Two-Way Weight Net 87.1 kg ( 192.02 lbs ) Dimensions (HxWxD) 914 x 584 x 759 mm (35.98" x 22.99" x 29.88“)
|
The very compact 4030B is a powerful bi-amplified speaker system ideal for small to mid-sized commercial installations such as clubs, bars, board rooms, museums, theaters, etc.
Our Intelligent Signal Sensing (ISS) feature, reduces power consumption to less than 0.5 watts by automatically switching the active monitor to standby, when no audio signal has been detected for some time. When it receives an audio signal again, the loudspeaker turns back on.
ISS is fully compliant with the latest EU requirements and the ErP 2013 Directive for electronic devices.
The MDETM (Minimum Diffraction EnclosureTM) enclosure has rounded edges and a gently curved front and sides to achieve a very smooth frequency response and superb imaging qualities with minimized cabinet edge diffraction.
The 4030B also features the advanced Genelec Directivity Control WaveguideTM (DCWTM), a revolutionary flow-optimized reflex port design, optimized die-cast aluminium structure with extremely durable semi-matt finish and acoustically optimized metal grilles.
| 100 dB | | 58 Hz - 20 kHz (± 2.5 dB)
55 Hz - 20 kHz (-3 dB) | | 3.0 kHz | | Bass 5" + Treble 3/4“
metal dome + DCWTM | | Bass 40 W + Treble 40 W | | H x W x D 285 x 189 x 178 mm | | 5.5 Kg (12.1 lb) | | 1 x balanced Phoenix connector |
|
Reviews
There are no reviews yet.